AdBlue®
FUEL CUT-OFF
DIESEL PRIMING
PUMP
In a serious collision, a mechanism
automatically prevents fuel from
reaching the engine.
If you run out of fuel, it is necessary to
prime the fuel circuit.
Other HDi engines
Fill the fuel tank with at least five
litres of Diesel.
The flashing of this warning
lamp is accompanied by a
message in the screen.
-
-
Squeeze and release the manual
priming pump, under the bonnet,
under the protective cover.
Check that there is no odour or
leakage of fuel outside the vehicle and
re-establish the fuel supply:
-
Operate the starter until the engine
starts.
-
switch off the ignition
(STOP position),
remove the key,
-
-
-
put the key back in the ignition,
switch on the ignition and start.
BlueHDi engine
-
-
-
Fill the fuel tank with at least five
litres of Diesel.
Switch on the ignition (without
starting the engine).
Wait around 6 seconds and switch
off the ignition.
-
-
Repeat the operation 10 times.
Operate the starter to run the
engine.
7
English 