C O M F O R T
Heated seats adjustment
Head restraint height adjustment
Never drive with the removed head
restraints in the vehicle as they
could be thrown around the vehi-
!
cle on sharp braking. They must always
be in place and adjusted correctly.
II
After installing the head restraint,
check that the height adjustment but-
ton has engaged correctly.
The adjustment is correct when the top
of the head restraint is aligned with the
top of the head of the seated person.
With the engine running, tilt the button
to the position required.
The temperature of the seat is regulated
automatically.
There are two setting positions:
) To raise it, pull upwards.
) To lower it, push it downwards,
pressing the height adjustment but-
ton at the same time.
) To remove it, raise it to the high
position, then remove it pressing
the height adjustment button at the
same time.
) To refit it, engage the rods of the
head restraint in the apertures,
pressing the height adjustment but-
ton at the same time.
Front armrest
-
-
"HI": High heating
"LO": Low heating
When the button is in the intermediate
position, the heating is switched off.
The indicator lamps A come on when
the system is activated.
You can move the console housing cover
in order to use it as an armrest.
52
English 
