2007-2012 Citroen C-Crosser Suv COMFORT -> Rear Seats (Row 2) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

COMFORT -> Rear Seats (Row 2) for Your Citroen C-Crosser Suv First Generation (2007-2012)

C O M F O R T  
REAR SEATS (ROW 2)  
The rear seats can be folded in two parts  
(1/3 - 2/3).  
When operating the seats, en-  
sure that no person or object  
is in the vicinity of the moving  
II  
!
parts to avoid any risk of injury or  
damage.  
To prevent the seat back from moving  
forwards sharply and knocking you,  
press on it with your back or push it with  
your hand while operating the lever.  
Forwards-backwards adjustment  
Seat back angle adjustment  
Pull the control towards the outside and Pull the control and adjust.  
adjust.  
When your seat is at the correct dis- angle, release the control.  
tance, release the control.  
To ensure that the seat is secured cor- to check that the two seats are at the  
rectly, move it forwards and backwards same level and that the angle of their  
slightly without using the control. seat backs is the same.  
When the seat back is at the correct  
Sit in the centre of the rear bench seat  
53  
C O M F O R T  
Rear armrest  
Access to the third row  
II  
Lower the armrest to use it.  
The passenger gains access to the  
third row of seats by tilting a second  
row seat.  
To put this seat back in place, refer to  
the following pages.  
To return to the initial configuration, push  
the armrest until it locks in its vertical  
position.  
54  
C O M F O R T  
Folding the second row*  
Before folding the seats, lower the head restraints fully.  
Before folding the seat backs forwards, insert the seat belt buckles in the slots provided for this purpose in the rear seat  
cushion.  
II  
1. Raise the rear seat lever A, or  
Pull the button in the boot B for at least one second, or  
Pull the rear seat releasing strap C towards you.  
2. The seat backs fold forwards then the cushion rises and folds forwards.  
3. After carrying out these operations, press on the seat lightly to check that it is secured correctly.  
Before folding the seats, ensure that no object or person is hindering the execution of the operations.  
Do not place luggage on the folded seats.  
!
* According to version.  
55  
C O M F O R T  
Returning the second row to the normal position  
II  
1. Lower the seat pulling simulta- 2. Press on the cushion to put it in 3. Pull the seat back upright pulling si-  
neously on the releasing strap A  
located at the rear of the cushion  
and supporting the seat with your  
hand.  
place until it engages.  
multaneously on the releasing strap  
located at the rear of the seat back.  
4. After putting the seat back back in  
place, push the seat and the seat  
back lightly to ensure that they are  
secured correctly.  
Force may be necessary to carry out these operations.  
On vehicles fitted with a third row, the rear of the cushion of the second row is fitted with a low level lamp B.  
When the releasing strap is pulled, the lamp comes on for approximately 10 seconds to illuminate the floor at the base of  
the third row.  
56  
C O M F O R T  
"Lowered seats" configuration  
II  
1. Remove the head restraints from the front seats.  
2. Raise the rear armrest and remove the load space cover.  
3. Move the rear seats as far back as possible.  
4. Move the front seats as far forward as possible and tilt their seat backs fully.  
5. Tilt the seat back of the rear seats.  
To return the seats to their normal position, carry out these operations in reverse order.  
57  

Related Topics

COMFORT
Ventilation Automatic Air Conditioning Front Seats Front Armrest Rear Armrest Lowered Seats Configuration Rear Bench Seat (Row 3) Door Mirrors Rear View Mirror Steering Wheel Adjustment Interior Fittings (Sun visor/Mat/Toll Cards) Front Interior Fittings Rear Interior Fittings Boot Fittings

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot