Increasing the programmed
speed
Temporary acceleration/
deceleration
Temporary acceleration
Press the accelerator pedal as normal.
When the pedal is released, you return
to the stored speed.
Reactivating the function
When the cruise control has been de-
activated, you can return to the stored
speed by pressing button 3 "ACC RES"
when you reach a minimum speed of
25 mph (40 km/h).
) Using button 3 "ACC RES":
-
successive presses increase the
speed in steps of approximately
1 mph (1.6 km/h).
-
a maintained press of this button
increases the programmed speed
progressively.
Temporary deceleration
Press the brake pedal to reduce the
speed. To return to the stored speed,
press button 3 "ACC RES".
Once the speed required has been
reached, release the button, the new
speed is stored.
) Using the accelerator pedal:
-
accelerate to reach the speed re-
quired, then press button 2 "COAST
SET". Release the button to store
the new speed.
When the cruise control is in
!
operation, pay attention if you
press and hold one of the pro-
grammed speed adjustment buttons:
this can result in a very rapid change
in the speed of your vehicle.
Do not use the cruise control on slip-
pery roads or in heavy traffic.
Onasteepdescent, thecruisecontrolwill
not be able to prevent the vehicle from
exceeding the programmed speed.
To prevent the mat from becoming
caught under the pedals:
To deactivate the cruise control:
) Press the brake or clutch pedal, or
) Press button 1 "ON OFF", or
) Press button 4 "CANCEL".
Decreasing the programmed
speed
VII
The cruise control may be deactivated
automatically:
) Using button 2 "COAST SET":
-
successive presses decrease the
speed in steps of approximately
1 mph (1.6 km/h).
a maintained press of this button
decreases the speed progressively.
) When the vehicle reaches a speed
below 20 mph (35 km/h).
-
-
ensure that the mat is positioned
correctly,
never fit one mat on top of another.
)
When the active stability control system
(ASC) comes into operation.
Once the speed required has been
reached, release the button, the new
speed is stored.
-
) Using the brake pedal:
-
brake to deactivate the cruise control,
then press button 2 "COAST SET".
Release to store the new speed.
122
English 
