D R I V I N G
Modification of the detection zones
) Press button A to deactivate the
Deactivation
REVERSING CAMERA
system.
) Press button Aagain for a few seconds
and release it.
The detection zone modification information
is indicated by an audible signal:
-
double signal on vehicles fitted with
a towbar,
-
single signal on vehicles which are
not fitted with a towbar.
) With reverse gear engaged, press
button A, the indicator lamp goes
off, the system is fully deactivated.
Reactivation
) With reverse gear engaged, press
button A again, the indicator lamp
comes on, the system is reactivated.
VII
Operating fault
If an operating fault occurs, the indicator
lamp in button A flashes when reverse
gear is engaged.
Contact a CITROËN dealer or a qualified
workshop.
Linked with the navigation option, a
reversing camera is activated automati-
cally when reverse gear is engaged.
The colour image is provided on the naviga-
tion screen with indication of the limit of the
rear bumper and of the general direction of
the vehicle.
In bad weather or in winter, check
that the sensors are not covered with
mud, ice or snow.
The red line indicates the distance re-
quired to open the lower tailgate.
124
English 
