Get MONITORING Guide for Citroen C-Crosser Suv First Generation (2007-2012)

INSTRUMENT PANEL

I

Screen type 1

Panel grouping together the dials and 3. Instrument panel screen:

warning/indicator lamps. These inform

the driver of the activation/deactivation

- Warning and status displays.

- Total and trip distance recorders.

- Service indicator.

of a system or of the occurrence of a

fault.

- Coolant temperature.

- Trip computer information.

- Cruise control setting.

- Dashboard lighting and parameter

settings.

- Fuel level.

1. Rev counter.

2. Speedometer.

- Ambient temperature.

- Transmission mode.

Screen type 2

21

INSTRUMENT PANEL WARNING LAMPS

I

Warning lamp

is on

Cause

Actions/Observations

Flashing

with

audible

warning

If this indicator lamp ﬂashes abnormally quickly, this

could indicate that the bulb of one of the direction

indicators has blown. Change the bulb or contact a

CITROËN dealer or a qualiﬁed workshop.

Left-hand

direction

indicator

This ﬂashes when you

press the lighting stalk

down.

Flashing

with

audible push the lighting stalk up. indicators has blown. Change the bulb or contact a

If this indicator lamp ﬂashes abnormally quickly, this

Right-hand

direction

indicator

This ﬂashes when you

could indicate that the bulb of one of the direction

warning

CITROËN dealer or a qualiﬁed workshop.

This comes on when

you pull the lighting stalk

towards you.

Main beam

headlamps

Pull the stalk to return to dipped beam

headlamps.

Fixed

This comes on when the

lighting stalk is in the

"Sidelamps" or "Dipped

beam headlamps"

position.

Sidelamps

Fixed

Turn the stalk to the desired position.

This comes on when you Turn the ring on the stalk forwards to switch on

use the front foglamps. the foglamps.

Front foglamps

Rear foglamps

Cruise control

This comes on when you Turn the ring on the stalk forwards to switch on

use the rear foglamps.

the foglamps.

This comes on when the

mode is active.

Press the "ON/OFF" button to activate/

deactivate the mode.

22

M O N I T O R I N G

Warning lamp

is on

Cause

Actions/Observations

I

Wait until this goes off before starting.

The duration for which this is on is determined

by the exterior climatic conditions.

This comes on when the

ignition switch is in the

ON position.

Diesel

preheating

Fixed

This comes on for a few

seconds when the ignition It is accompanied by a message on

is turned to "ON" then

goes off.

the instrument panel screen.

Parking brake/

Brake ﬂuid

level

The parking brake is

applied or has not been

released fully.

It is accompanied by a message on the

instrument panel screen. Release the parking

brake to switch off the warning lamp.

Fixed

It is accompanied by a message on the

instrument panel screen. Top up with brake ﬂuid

and contact a CITROËN dealer or a qualiﬁed

workshop.

The brake ﬂuid level is

too low.

Contact a CITROËN dealer or a qualiﬁed

workshop.

It should go off a few seconds after starting

the engine.

This comes on or ﬂashes

in the event of a fault with

the system.

Emission

control system

Fixed or

ﬂashing

It should go off when the engine is started.

It is accompanied by a message on

the instrument panel screen. Check the battery

terminals (refer to the "Battery" section).

This comes on if a

charging circuit fault

occurs.

Battery charge

Fixed

23

M O N I T O R I N G

I

Warning lamp

Driver's

is on

Cause

Actions/Observations

This is accompanied by a message on

the instrument panel screen.

Fasten the driver's seat belt.

The driver has not

fastened or has

unfastened their seat belt.

seat belt not

fastened

Fixed

It is accompanied by a message in the

instrument panel screen. The vehicle retains

This comes on if an anti-

lock braking system fault conventional braking without assistance but

ABS

Fixed

occurs.

you are advised to stop. Have it checked by

a CITROËN dealer or a qualiﬁed workshop.

This comes on for a few

seconds when the ignition

is turned to "ON" then

goes off.

It should go off when the engine is started. If it

does not go off, contact a CITROËN dealer or

a qualiﬁed workshop.

Airbags and

pretensioners

Fixed

It is accompanied by a message on

the instrument panel screen. Have the system

checked by a CITROËN dealer or a qualiﬁed

workshop without delay.

This comes on if an

airbag or pretensioner

fault occurs.

It is accompanied by a message on

the instrument panel screen. Have the system

checked by a CITROËN dealer or a qualiﬁed

workshop without delay.

Dynamic

stability control

system (ASC)

This comes on if

a dynamic stability control

system fault occurs.

24

M O N I T O R I N G

I

Each time the engine is started: a series of warning lamps and/or messages come on, applying a checking self test. They go

off after a few seconds. Engine running: the warning lamp or the message becomes a warning if it remains on continuously

or ﬂashes. This initial warning may be accompanied by an audible signal and a message on the screen. Do not ignore these

warnings.

The messages displayed may differ between the type 1 instrument panel and the type 2 instrument panel.

When the cause of the appearance of the warning lamp or warning message has been rectiﬁed, the warning disappears

from the screen automatically. If the cause of the warning is not rectiﬁed, you can return to the previous screen at any time

by pressing the INFO button on the dashboard.

The symbol "!" is displayed.

To return to the previous screen (with the "!" symbol), you must press the INFO button several times.

Symbols which appear in the top right corner of the screen.

You can close the warning messages which show these symbols in order to move on to the next screen.

To do this, press the INFO button according to the symbol displayed.

Press brieﬂy.

Press and hold.

Warning messages (ignition at "OFF")

Message

is on

Cause

Solution - action

Observations

Only if the engine has

been started.

An intermittent audible

signal is heard.

The driver's door is open

and you have forgotten

to remove the key from

the ignition.

Turn the ignition switch

to the LOCK position

and remove the key.

Key in

ignition

Fixed

You have forgotten to

switch off the vehicle

lighting.

Switch off the vehicle

lighting by placing the

stalk at OFF.

Lighting

left on

An intermittent audible

signal is heard.

Fixed

25

M O N I T O R I N G

Warning messages (ignition at "ON")

I

Message

is on

Cause

Solution - action

Observations

The vehicle retains

conventional braking

without assistance

but you are advised

to stop.

Anti-lock braking system

(ABS) fault.

Contact a CITROËN dealer

or a qualiﬁed workshop.

ABS

Fixed

Associated warning

lamp.

The level of brake

ﬂuid in the reservoir is

too low.

If the message

Stop and top up, otherwise remains on after

contact a CITROËN dealer topping up, contact a

or a qualiﬁed workshop.

CITROËN dealer or

a qualiﬁed workshop.

Braking

system

Fixed

Associated warning

lamp.

Braking system fault.

You must stop as

soon as it is safe

to do so.

Contact a CITROËN dealer

or a qualiﬁed workshop.

You have moved off with

the parking brake still

applied.

Parking brake

on

Fixed

Release the parking brake.

If the message ﬂashes,

wait for the engine to cool

before topping up the level,

if necessary.

Flashing

You must stop

your vehicle as

soon as it is safe

to do so.

Coolant

temperature

High engine temperature.

If the message ﬂashes

and the service

warning light comes

on, contact a CITROËN

dealer or a qualiﬁed

workshop without delay.

Flashing

Fixed

There is an

The driver has not fastened

or has unfastened his seat

belt.

intermittent audible

signal above 5 mph

(8 km/h).

Seat belt

Fasten your seat belt.

26

M O N I T O R I N G

I

Message

is on

Cause

Solution - action

Observations

Contact a CITROËN

dealer or a qualiﬁed

workshop.

Fault in the airbags or

pretensioners.

Airbags

Fixed

Stop the vehicle and To identify the

contact a CITROËN problem, contact a

Problem in one of the systems

which does not have a speciﬁc

message.

Service

Fixed

dealer or a qualiﬁed

workshop.

CITROËN dealer or

a qualiﬁed workshop.

Stop the vehicle and

contact a CITROËN

dealer or a qualiﬁed

workshop.

Engine oil pressure too low or

fault in the engine lubrication

system.

Engine oil

pressure

Stop the vehicle and

check the level using

the dipstick.

Engine oil

level

If there is a lack of

oil, top up the level.

Engine oil level too low.

The fuel level is low.

Fuel system fault.

Low fuel

warning

Refuel as soon as

possible.

Contact a CITROËN

dealer or a qualiﬁed

workshop.

Fuel system

The opening

One of the doors or the tailgate Close the door or the concerned is

Opening

not closed

correctly

is not closed correctly.

tailgate.

indicated on the

screen.

27

M O N I T O R I N G

I

Message

is on

Cause

Solution - action

Observations

Dynamic

Contact a CITROËN

dealer or a qualiﬁed

workshop.

stability

control

system (ASC)

Dynamic stability control system

(ASC) fault.

Fixed

Contact a CITROËN

dealer or a qualiﬁed

workshop.

Four wheel

drive system

Four wheel drive transmission

system fault.

Fixed

Stop the vehicle and The vehicle switches

contact a CITROËN to front wheel

dealer or a qualiﬁed

workshop.

Four wheel

drive system

temperature

The temperature of the four

wheel drive transmission

system is too high.

drive (2 WD) mode

automatically.

Automatic

headlamp

adjustment

system

Contact a CITROËN

dealer or a qualiﬁed

workshop.

The automatic headlamp

adjustment is faulty.

Only on vehicle ﬁtted

with xenon bulbs.

Stop the vehicle and

contact a CITROËN

dealer or a qualiﬁed

workshop.

Battery

charge

Battery charge fault.

Caution: The road

may be icy even

when this screen is

not displayed.

Road icy.

Take care and drive

slowly.

Ambient

temperature

The ambient temperature is

3 °C (37 °F) or below.

28

I

Message

is on

Cause

Solution - action

Observations

As soon as trafﬁc

conditions permit,

regenerate the ﬁlter

by driving at a speed

of at least 35 mph

(60 km/h) until the

message is cleared.

If the message is still

displayed, contact a

CITROËN dealer or

a qualiﬁed workshop.

Saturation of

the particle

emission ﬁlter

Start of saturation of the particle

emission ﬁlter.

Fixed

Have the level

topped up by a

Diesel

additive level

Fixed

Low Diesel additive level.

CITROËN dealer or

a qualiﬁed workshop

without delay.

The presence of water in the

Diesel ﬁlter is indicated.

Risk of damage to the injection

system on Diesel engines.

Water in the

Diesel ﬁlter

(according to

country)

Contact a CITROËN

dealer or a qualiﬁed

workshop without

delay.

Fixed

29

M O N I T O R I N G

Information messages (ignition at "ON")

I

Message

is on

Status of the system

2WD two wheel

drive system

When the "2WD" (2 wheel drive) mode is selected using the

transmission mode selector.

Flashing

When the "4WD" (4 wheel drive) mode is selected using the

transmission mode selector.

This mode is the default mode.

4WD four wheel

drive system

Flashing

4WD LOCK four

wheel drive system

When the "LOCK" (4 wheel drive) mode is selected using the

transmission mode selector.

This indicates the ambient temperature.

When the vehicle is stationary or if the speed is below 12 mph (20 km/h)

the temperature displayed may not be the true temperature.

Ambient

temperature

Fixed

Prevention messages

Display

is on

Cause

Solution - action

Observations

Informs the driver of

the time remaining

before the vehicle's

scheduled service.

Contact a CITROËN This is displayed for a few

seconds when the ignition is

switched on.

Service

indicator

Fixed

dealer or a qualiﬁed

workshop.

This is displayed when the

driving time that you set

previously is reached.

An audible signal is heard

3 times and is then heard every

5 minutes until the vehicle stops.

Informs the driver that

they should stop to

take a break.

Break

advised

You are advised to

take a break.

Fixed

30

Distance recorder (A and B)

The total distance is dis-

Range

INFORMATION IN THE

INSTRUMENT PANEL SCREEN

When the engine is

running, this indicates

the number of miles

(kilometres) which can

still be travelled with the

fuel remaining in the tank

based on the average

fuel consumption over

I

played in zone 1 of the

screen and the trip dis-

tance in zone 2 (refer to

the "Distance recorders"

section).

Information display

the last few miles (kilometres) travelled

(refer to the "Range" section).

Service indicator

This displays the dis-

tance and the number of

monthsremainingbefore

the next service in line

with with the manufac-

turer’s servicing sched-

ule (refer to the "Service

indicator" section).

Trip computer

This indicates the aver-

age fuel consumption,

the average speed and

the current fuel con-

sumption (refer to the

"Trip computer" section).

With the ignition on, press the INFO

button, located on the dashboard to the

right of the instrument panel, to display

the various information in succession:

-

distance recorder A,

distance recorder B,

service indicator,

coolant temperature,

range,

Coolant temperature

Setting menu

When the vehicle is sta-

tionary, this allows the

user to change the follow-

ing settings (refer to the

"Setting menu" section):

- the display language,

- the temperature dis-

play units,

When the engine is run-

ning, this indicates the

temperature of the cool-

ant (refer to the "Coolant

temperature indicator"

section).

trip computer,

setting menu.

-

the fuel consumption units,

the option to reset the average

fuel consumption and the average

speed,

-

the break (rest) reminder display in-

terval.

31

M O N I T O R I N G

DISTANCE RECORDERS (A/B)

COOLANT TEMPERATURE

RANGE

I

When the engine is

running, this indicates

the distance which can

still be travelled with the

fuel remaining in the tank

based on the average

fuel consumption over the

last few miles/kilometres

travelled.

System for measuring the total distance

travelled by the vehicle during its

service life and the distance travelled in

a day or other period until it is reset to

zero by the driver.

When the engine is

running, this indicates

the temperature of the

coolant.

The total distance is

displayed in zone 1 of

the screen and the trip

distance in zone 2.

If the bar is close to the critical position

located on the right, the temperature is

too high.

When the range is less than 30 miles

(50 km), dashes are displayed.

Refuel as soon as possible. The display

of the range is updated.

The symbol ﬂashes when your engine

is overheating.

Zero reset

You must stop your vehicle as soon

as it is safe to do so.

Wait a few minutes before switching

off the engine.

With the ignition on, press the INFO

button for more than 2 seconds until

zeros appear.

This ﬁgure may increase following a

change in the style of driving or the

relief, resulting in a reduction in the

current fuel consumption.

If you only add a few litres, the

value displayed will be incorrect.

Therefore, you must ﬁll the tank

whenever possible.

Wait for the engine to cool before

topping up the level. The cooling

system is pressurised.

!

When you disconnect the

To avoid any risk of scalding, unscrew

the cap by two turns to allow the

pressure to drop.

When the pressure has dropped,

remove the cap and top up the level, if

necessary.

!

battery, the previous fuel

consumption data is lost and the

value displayed will be different from

that displayed before the battery was

disconnected. The distance displayed

must be considered an approximate

indication.

Contact a CITROËN dealer or a

qualiﬁed workshop.

32

M O N I T O R I N G

Example: the display indicates that

7 300 miles (kilometres) remain before

the next service is due.

SERVICE INDICATOR

Resetting the service indicator

to zero

I

System which informs the driver when

the next service is due in accordance

with the manufacturer's servicing

schedule.

Your CITROËN dealer or a qualiﬁed

workshop carries out this operation

after each service.

If you have carried out your vehicle's

service yourself, the zero reset

procedure is the following:

The point at which the next service is

due is calculated from the last service

indicator zero reset.

) switch off the ignition.

It is determined by two parameters:

) press the INFO button several times

in succession until the service indi-

cator is displayed.

) press and hold the INFO button for

a few seconds until the spanner

ﬂashes.

) press the INFO button while the

spanner is ﬂashing to change the dis-

play "---" to "CLEAR" then the time

remaining before the next service is

due is displayed.

-

the distance travelled (in miles (km)),

the time elapsed since the last ser-

vice (in months).

The symbol "--" remains displayed

until the ﬁrst service of a new vehicle

has been carried out.

The distance remaining to be travelled

may be weighted by the time factor,

depending on the user's driving habits.

Service overdue

Each time the ignition is switched on,

the display "PERIODIC INSPECTION"

is displayed for a few seconds to

indicate that the service must be carried

out without delay.

Operation

When the ignition is switched on, you

must press the INFO button several

times in succession until the service

indicator is displayed. The distance

recorder display line indicates the

number of miles (kilometres) remaining

and the time elapsed line indicates the

number of months remaining before the

next service is due.

Example: the display indicates that the

service is overdue. This service must

be carried out by a CITROËN dealer or

a qualiﬁed workshop.

After a certain distance and a certain

time, the display of "---" is reinitialised

and the display indicates the time

remaining before the next service is

due.

33

M O N I T O R I N G

TRIP COMPUTER

Average fuel

consumption (l/100 km

or km/l or mpg)

Resetting the information to zero

I

Information display

This is the average fuel

consumption since the

last zero reset.

This ﬁgure may change following a

change in the style of driving or the

relief resulting in a change in the cur-

rent fuel consumption.

When the required information is

displayed, press the INFO button for

more than two seconds to reset all of

the information to zero.

Average speed (km/h

or mph)

With the ignition on, press the INFO

button on the dashboard, to the right

of the instrument panel, several times

in succession to display the different

information:

This is the average

speed calculated since

the last zero reset.

When the ignition is switched on, the

zero reset switches automatically from

manual mode to automatic mode.

-

average fuel consumption,

average speed,

current fuel consumption.

Current fuel

consumption (l/100 km

or km/l or mpg)

Automatic

If the ignition key remains in the

OFF position for more than 4 hours,

the information is reset to zero

automatically.

This is the average fuel

consumption during the

last few seconds of driving.

If dashes "---" are displayed for long

periods in place of the digits while

driving, contact a CITROËN dealer or

a qualiﬁed workshop.

34

M O N I T O R I N G

MENU 2/3:

-

SETTING MENU

a/b (option of displaying a different

When the vehicle is moving, the

setting menu screen is not displayed

when you press the INFO button.

I

System which provides access to the

settings of certain functions.

language in the instrument panel

screen and the navigation screen),

activation/deactivation of the

-

The various menus may differ for the

type 1 instrument panel and the type 2

instrument panel.

With the ignition on, press the INFO

button on the dashboard, to the right of

the instrument panel, several times in

succession until the "SETTING MENU"

screen is displayed.

INFO button sound,

ALARM (changing the "BREAK RE-

MINDER" display interval),

Operation

) press and hold the INFO button for

a few seconds to display the menu

screen.

choice of the direction indicators

sound,

activation/deactivation of current

fuel consumption,

When the vehicle is

stationary, it allows

the user to change the

following settings:

- resetting average fuel

consumption and av-

erage speed,

MENU 3/3:

RESET (restore factory settings).

-

the fuel consumption units,

the temperature display units,

the display language,

activation/deactivation of the INFO

button sound,

the break (rest) reminder display in-

terval,

restore factory settings.

) on the menu screen, press the INFO

button to select a function from the

list:

Press and hold the INFO button

for a few seconds to return to the

previous screen.

When the menus screen is

displayed, if no operation is carried

out within 15 seconds, the setting

menu screen is displayed.

-

MENU 1/3:

-

1 - 2 (options for resetting aver-

age fuel consumption and average

speed),

-

UNIT (choice of the fuel consump-

tion units),

To change the settings, you

must stop the vehicle and switch

on the ignition.

!

choice of the temperature display

units,

LANGUAGE (choice of display lan-

Apply the parking brake and place

the gear lever in neutral.

guage),

35

M O N I T O R I N G

In this case, the distance, speed and

quantityoffuelunitswillalsobechanged

in accordance with your choice of fuel

consumption unit.

Options for resetting average

fuel consumption and average

speed

If the battery is disconnected, the

settings memory is cleared and

the default unit (km/L) is restored

automatically.

I

You can choose between two average

fuel consumption and average speed

resetting modes:

On the menu screen:

) press the INFO button to select

"UNIT".

-

automatic reset (choice 1),

manual reset (choice 2).

Choice of temperature display

units

On the menu screen:

) press the INFO button to select:

You can choose between different units

for displaying the temperature.

On the menu screen:

) press the INFO button to se-

lect the temperature unit set-

ting symbol (thermometer).

) press and hold the INFO button for

a few seconds to display the "UNIT"

screen.

) press and hold the INFO button for a

few seconds to switch in succession

from resetting mode 1 (automatic)

to resetting mode 2 (manual).

The mode selected is conﬁrmed.

) press and hold the INFO button for

a few seconds to alternate between

the units (°C and °F).

The mode selected is conﬁrmed.

) press the INFO button to scroll the

units (km/L, L/100 km, mpg(US),

mpg(UK) and RETURN) in succes-

sion.

) press and hold the INFO button for

a few seconds to conﬁrm your se-

lection.

Choice of fuel consumption

units

If the battery is disconnected, the

settings memory is cleared and the

default unit (°C) is restored automati-

cally.

You can choose between different units

for displaying fuel consumption.

36

M O N I T O R I N G

Choice of display language

(LANGUAGE)

Changing the display interval

of the "BREAK REMINDER"

message

If the battery is disconnected, the

settings memory is cleared and

the default language (ENGLISH) is

restored automatically.

I

You can choose between different

languages for the screen.

On the menus screen:

You can change the display interval of

the "BREAK REMINDER" message.

) press the INFO button to select

"LANGUAGE".

On the menu screen:

) press the INFO button to select

"ALARM" (located on menu 2/3).

Activation/deactivation of the

"INFO" button sound

You can activate or deactivate the INFO

button sound.

On the menus screen:

) press the INFO button to

select the INFO button

sound activation/deactiva-

tion symbol (located on

menu 2/3).

) press and hold the INFO button

for a few seconds to display the

"LANGUAGE" screen.

) press and hold the INFO button

for a few seconds to display the

"ALARM" screen.

) press the INFO button to scroll

through the languages (Japonais,

English, Deutsch, Français, Espa-

nol, Italiano, "---" and RETURN) in

succession.

) press and hold the INFO button for

a few seconds to conﬁrm your se-

lection.

) press and hold the INFO button for

a few seconds to alternate between

the choices (ON, OFF).

) press the INFO button to select

the display interval of the "BREAK

REMINDER" message.

) press and hold the INFO button for

a few seconds to conﬁrm.

The mode selected is conﬁrmed.

If the battery is disconnected, the

settings memory is cleared and

the default value (OFF) is restored

automatically.

If the battery is disconnected, the

settings memory is cleared and

the default choice (ON) is restored

automatically.

If you select the "---" setting, no

message will be displayed in

message display situations.

37

M O N I T O R I N G

The factory settings are:

) press the INFO button for a few

seconds to alternate between the

choices (ON, OFF).

Choice of the direction

indicators sound

I

You can choose the sound of the

direction indicators, on the type 2

instrument panel only.

Functions

Factory setting

Resetting average

fuel consumption

and average

speed

On the menus screen:

Restoring factory settings

(RESET)

1 (automatic)

L/100 km

) press the INFO button to select

sound 1 or 2 (located on menu

2/3).

You can restore all of the factory settings

for all of the functions.

On the menu screen:

) press the INFO button to select

"RESET" (located on menu 2/2 or

3/3 depending on the instrument

panel).

Fuel consumption

units

Temperature

display unit

°C

Activation/deactivation of the

current fuel consumption

Display language

ENGLISH

You can activate or deactivate the

current fuel consumption, on the type 2

instrument panel only.

On the menu screen:

INFO button

sound

ON (activated)

OFF(deactivated)

) press the INFO button to select the

current fuel consumption activation/

deactivation symbol (located on

menu 2/3).

Display of

the "BREAK

REMINDER"

message

) press and hold the INFO button for

at least 5 seconds.

An audible signal is heard and all of the

factory settings are restored for all of

the functions.

38

M O N I T O R I N G

MONOCHROME SCREEN

Setting the time

Selecting the Setting

I

Select the automatic mode or the

manual mode as follows:

Thedigitalclockcanbesetinautomatic

mode or in manual mode.

This provides the following information:

-

the time,

audio system information (refer to

the "Audio and Telematics" section).

) Press button A "PWR" to switch on

the audio system.

Automatic mode

) Access the setting mode by pressing

button B "TUNE" for approximately

2 seconds.

This mode permits automatic setting

of the local time using the signal from

RDS stations.

) Press button B "TUNE" several

times to scroll through the various

menus and select the CT menu

(clock time).

The symbol "CT" appears on the screen.

Manual mode

This mode permits manual setting of

the time using the audio equipment

buttons.

It can also be used when the "Automatic

mode"displaysaninaccuratetime,when

the local RDS stations are broadcasting

from a different time zone.

The order of the menus is the following:

AF/CT/REG/TP-S/PTYdisplaylanguage/

SCV/PHONE/Functions setting mode

OFF.

39

M O N I T O R I N G

Manual mode

) After setting the time, press the

DISP button; the time display stops

ﬂashing.

I

The digital clock does not display

seconds.

When the "minutes" display is set or

reset to zero, the clock starts at the

zero second of the minute selected.

The time setting is lost if the battery

is disconnected.

) Turn button B "TUNE" to the left or

to the right to select "CT ON" (auto-

matic mode) or "CT OFF" (manual

mode).

Set the time using the buttons as

indicated below:

) with the ignition on or in the ACC

(Accessories) position, press and

hold the CLOCK button until the

time display ﬂashes.

) Press the appropriate button to set

the time:

Button H: to set the hours

) After selecting the mode, you can

exit the "Functions setting mode"

menu by pressing button B "TUNE"

for approximately 2 seconds.

The hours digits scroll when you press

this button.

Button M: to set the minutes

The minutes digits scroll when you

press this button.

Button 00: to reset the minutes to zero.

If no action is carried out within

10 seconds, the system will exit

the "Functions setting mode" menu

automatically.

-

from 1 to 29 min: rounded down to

the previous hour,

Automatic mode

-

from 30 to 59 min: rounded up to

the next hour.

In this mode, setting is automatic using

the signal from the RDS radio stations.

40

M O N I T O R I N G

"Settings" menu

"Navigation-guidance" menu

COLOUR SCREEN

I

This permits display of the following

main menus:

On the control panel, press button B On the control panel, press button C

(SET) to access the "Settings" screen (MENU) to access the "Menu" screen

and select:

"Audio-video" menu

-

"Display Off" to switch off the display,

-

"Address/Junction" to search for

a location using the address or the

name of the street,

"POI name" to search for a location

using the name of a point of interest

(POI),

"Advanced search" to search for a

location using an advanced search

based on a POI,

"Previous 20" to search for a loca-

tion using one of the 20 previous

destinations,

"Address book" to search for a

location using a stored address,

"Home" to navigate to your home

address,

"Navigation settings" to set func-

tions linked with the navigation,

"Navigation tools" to access the

basic information or a pre-set dem-

onstration.

"Sound control" for the sound dis-

tribution or volume, the type of music

and the sound ﬁeld (surround),

"Picture control" to set the colour,

the intensity, the brightness, the

contrast and the level of black,

"System" to change the time zone,

the language, the units and other

settings,

"Wide Screen" to change the size

of the DVD picture to 4/3 format,

wide screen mode, centred wide

screen mode or enlargement,

"Equipment" to set certain equip-

ment offered in the vehicle,

"Colour Contrast" to select the

contrast of the display in relation

to the ambient light (Day, Night or

Auto),

-

On the control panel, press button A

(MODE) to access the "AV mode"

screen and select:

-

radio (FM, MW, LW),

CD (audio, MP3 or WMA),

Music Server,

-

DVD.

-

"TP standby" to activate or deacti-

vate the trafﬁc information.

The "CD" and "DVD" buttons are

active if you insert a CD or DVD in

the player.

41

"Info" menu

"Route" menu

Setting the time

I

On the control panel, press button D On the control panel, press button E

(INFO) to access the "Info" screen and (NAVI) to access the "Route Menu"

consult: screen and select:

The digital clock is set automatically.

This mode enables the system to set

the local time automatically using the

signal from the RDS stations.

) On the control panel, press button A

(SET) to access the "Settings"

menu.

-

"Support info" to display the soft-

ware and data versions,

"Vehicle position" to display the

GPS location of the vehicle,

"Calendar" to make a note of

events, birthdays, etc.,

"Journey" to display the average

speed, fuel consumption, distances

and driving time,

-

"Detour" to make a detour through

a speciﬁed region,

"Itinerary" to change the route,

"View route" to display a route in

different ways,

"Delete route" to delete a route,

"Nearby POI" to search for the

POIs in the surrounding area.

-

"Environment" to display the alti-

tude, the atmospheric pressure, the

exterior temperature (the ice symbol

is displayed if there is a risk of ice),

-

"Air conditioning" to display the

information relating to the air condi-

tioning,

"Mobile phone" to enter a number,

delete a character, make or receive

a call.

) On the touch screen, press button B

to access the "System" menu.

The system settings screen is displayed.

42

M O N I T O R I N G

Once this menu has been selected, you

can access the following functions:

LIGHTING RHEOSTAT

System for manual adjustment of the

brightness of the instruments and

controls in relation to the exterior

brightness.

I

) Press button C to access the "Time"

menu.

1. RDS Auto Correct:

Activate/deactivate automatic ad-

justment.

2. GMT/GMT+1/GMT+2

Select the time zone.

3. Summer Time:

Summer time On/Off.

) Press button D to conﬁrm and re-

turn to the previous menu.

With the lighting on or off, press the

button to change the intensity of the

lighting of the instruments and controls

in "day" or "night" mode.

An audible signal is heard and the

intensity of the lighting increases

each time the button is pressed.

When the lighting reaches the maximum

setting, press again to change to the

minimum setting.

When the lighting reaches the required

intensity, release the button.

You must deactivate automatic

adjustment (RDS Auto Correct) to

change the time zone and summer

time settings.

On each screen, you can return to

the previous screen by pressing

button D "Return".

The setting is saved when the ignition

switch is turned to OFF.

43

MONITORING for Your Citroen C-Crosser Suv First Generation (2007-2012)

Related Topics

Popular Owner Manuals

Latest Owner Manuals