Get Audio Guide for Citroen C1 4 Door First Generation (2005-2014)

AUDIO

2

GENERAL FUNCTIONS

Clock adjustment: press for more

than 2 seconds/Access to the

audio settings

Selection of the source: auxiliary

(or CD or CD changer)

Hours adjustment/

Audio settings

On/Off

Auxiliary socket for portable

equipment (MP3 player, ...)

Minutes adjustment/

Audio settings

Volume adjustment

24

AUDIO

2

On/off

Volume adjustment

Auxiliary socket

With the ignition key in

the accessories posi-

tion or with the ignition

on, press this button to

Press the upper part

An auxiliary socket

"AUX" is provided for

the connection of por-

table equipment (MP3

player, etc.).

of this button several

times in succession to

increase the volume

of the audio equip-

ment or the lower part

of this button to de-

crease it.

switch the audio equipment on or off.

After the engine has been switched

off, the audio equipment can

only operate for approximately

30 minutes, to prevent discharging

of the battery.

In order to listen to it,

connect your equip-

ment then press this

button.

The audio equipment controls enable

you to adjust the volume and the au-

dio settings.

To exit from the AUX source, press

AM/FM.

Setting the clock

Audio settings

When using an MP3 player: in-

crease the volume of the radio signifi-

cantly (between 30 and 60) to obtain

a satisfactory playing volume.

Press this button for

more than 2 seconds,

the clock display

ﬂashes:

Press this button sev-

eral times in succes-

sion to gain access

to the bass (BASS),

treble (TREB), front/rear balance

(FAD) and left/right balance (BAL)

settings.

- to adjust the hours,

press this button,

When the parameter

is displayed, change

the setting using these

two buttons.

-

to adjust the minutes,

press this button.

You exit from this mode automati-

cally after a few seconds without any

action.

You exit from this mode automati-

cally after a few seconds without any

action.

25

AUDIO

2

RADIO

TA function on/off:

trafﬁc information priority

Selection of the AM/FM

(FM1, FM2, FM3) wavebands

Autostore: automatic storing of

6 stations on AM and FM3

AF function on/off: alternative

frequency

Automatic search for a higher

frequency: double press/

Successive tuning in to

the stations

Selection of the type of radio

programme: News, Sports, Talk,

Pop, Classics

Manual search for a higher

frequency

Selection of the stored station/

Storing of a station: press for

more than 2 seconds

Manual search for a lower

frequency

26

AUDIO

2

Stereo reception

Automatic station search

Manual station search

When the audio equipment receives

a station broadcasting in stereo it au-

tomatically transmits stereo sound

and the screen displays "ST". If the

reception conditions deteriorate, the

audio equipment returns to mono

transmission and "ST" is no longer

displayed.

Press this button twice

to select the next sta-

tion.

Press one of these

two buttons brieﬂy to

increase or decrease

the frequency dis-

played respectively.

If you maintain the

pressure on the button

in the chosen direc-

Press this button brieﬂy to listen to

each station available on the FM

waveband for three seconds. To stop

the station scan, press this button

again.

If the trafﬁc information programme

TA is selected, only stations which

broadcast this type of programme

are selected.

Selection of the radio source

tion, the frequency will be scanned

continuously.

The scan stops when you release the

button.

Press this button.

Manual station storing

Selection of a waveband

Press the button suc-

cessively to select

the wavebands FM1,

FM2, FM3 and AM.

Select the required station.

Press one of the buttons "1" to "6"

for more than 2 seconds.

An audible signal conﬁrms that the

station has been stored.

27

AUDIO

2

Automatic storing of FM

stations (autostore)

Press this button.

Recalling stored stations

Radio reception

Your audio equipment will

be subjected to phenomena

Your audio equipment

automatically stores

the six best transmit-

which do not affect domestic radio

sets. Both MW/LW and FM reception

are subject to various forms of inter-

ference. This is no reﬂection on the

quality of the equipment but is due to

the nature of the signals and the way

in which they are transmitted.

ters received on AM and FM in your

current location. These stations are

stored on the AM and FM3 wave-

bands. The end of the search is sig-

nalled by two audible signals.

On each waveband, a brief press on

one of the buttons "1" to "6" recalls

the corresponding stored station.

On MW/LW, interference may be no-

ticed when passing under high voltage

power lines or bridges, or in tunnels.

On FM, interference may be the re-

sult of increasing distance from the

transmitter, deﬂection of the signal

by obstacles (mountains, hills, build-

ings, etc) or of being in an area which

is not covered by a transmitter.

If it was not possible to ﬁnd

six transmitters, the remain-

ing memories remain empty:

three dashes are displayed

on the audio equipment screen for

each empty memory.

28

AUDIO

2

RDS

Search by type of programme

(PTY)

EON system

This system links stations which be-

long to the same network. It permits

the transmission of trafﬁc information

broadcast by a station which belongs

to the same network as the station to

which you are listening.

Using the AF (alternative

frequency) function on the FM

waveband

This enables you to listen to sta-

tions which broadcast a type of pro-

gramme which has a theme (NEWS,

SPORTS, TALK, POP, CLASSICS).

The RDS (Radio Data System) en-

ables you to continue listening to the

same station irrespective of the fre-

quency that it uses in your current

location. The audio equipment con-

tinuously searches for the transmitter

which provides the best reception.

When FM is selected,

press this button:

In order to beneﬁt from this, select the

trafﬁc information programme TA.

-

"no pty" is displayed,

then press the button brieﬂy to

The volume of the trafﬁc in-

formation is independent of

the volume of normal radio

listening.

select a programme.

After a few seconds without any ac-

tion, your selection is stored.

Press this button suc-

cessively to activate

or deactivate the func-

tion.

You can adjust it using the volume

button, when the TA programme is

being transmitted.

The setting will be stored and will be

used during subsequent message

transmissions.

Traffic information

programme (TA)

The screen will indicate:

-

"AF" if the function is activated,

"AF REG" if the function is

activated at regional level,

"AF" ﬂashing if the function is not

available.

Press this button suc-

cessively to activate

or deactivate the func-

tion.

-

On FM, the multifunction display will

indicate:

-

"TP" or "TP EON": the radio

transmits a programme while

awaiting the broadcasting of

trafﬁc information.

Regional mode (REG)

Some stations, organised in a network,

broadcast regional programmes in the

various regions which they serve. The

regional mode enables you to continue

listening to the same programme.

-

"TA" or "TA EON": the pro-

gramme transmitted by the radio

is put on standby while awaiting

the broadcasting of trafﬁc infor-

mation.

If you wish to interrupt the transmis-

sion of a message, press this button

again.

29

AUDIO

2

CD/CD CHANGER

Selection of the next track

Selection of the source: CD or CD

changer (or auxiliary)

CD eject

Selection of the previous track

Play the start of each track on

the CD: brief press

Random play of the tracks on the

CD currently being played

: fast forwards play

: fast backwards play

CD changer:

: selection of the previous CD

: selection of the next CD

CD: repeat the current track/CD changer, press for

more than 2 seconds: repeat the current CD

30

AUDIO

2

CD AND CD CHANGER

FUNCTIONS

CD FUNCTIONS

Repeat of a track on the CD

(RPT)

Selection of the CD player

If you wish to listen

to the current track

Selection of a track on a CD

again,

press

this

When a CD is insert-

ed, printed face up-

permost, play begins

automatically.

button. To cancel the

repetition, press the

button again.

Press this button to

select the next track.

If there is a CD in the player already,

press this button.

Press this button to

return to the start of

the current track or

to select the previous

track.

The use of copied CDs may

cause faults.

Insert circular CDs only.

CD eject

Press this button to

eject the CD from the

player.

Fast play

Press and hold one

of these buttons for

fast forwards or back-

wards play respec-

tively.

Random play of the CD

(RAND)

The fast play stops

when the button is re-

leased.

When the CD player

is selected, press this

button.

The tracks on the CD will be played

in a random order. Press the button

again to return to normal play.

Introscan (SCAN)

The random play mode is deacti-

vated when the audio equipment is

switched off.

Press this button to lis-

ten to the start of each

track on the current CD.

31

AUDIO

2

CD CHANGER FUNCTIONS

Random play of a CD (RAND)

Repeat of a CD (RPT)

If you wish to listen to

When the CD changer

is selected, press this

button for 2 seconds.

the current CD again,

press and hold this

button.

Selection of the CD changer

Press this button.

The tracks of the current CD will be

played in a random order.

To cancel the repetition, press the

button again.

Press the button again for 2 seconds

to return to normal play.

The use of copied CDs may

cause faults.

Insert circular CDs only.

Selection of a CD

Press one of these

buttons on the audio

equipment to select

the previous or next

CD respectively.

32

Audio for Your Citroen C1 4 Door First Generation (2005-2014)

Related Topics

Popular Owner Manuals

Latest Owner Manuals