Advertisement

Advertisement

Audio -> Radio for Your Citroen C1 4 Door First Generation (2005-2014)

AUDIO  
2
RADIO  
TA function on/off:  
traffic information priority  
Selection of the AM/FM  
(FM1, FM2, FM3) wavebands  
Autostore: automatic storing of  
6 stations on AM and FM3  
AF function on/off: alternative  
frequency  
Automatic search for a higher  
frequency: double press/  
Successive tuning in to  
the stations  
Selection of the type of radio  
programme: News, Sports, Talk,  
Pop, Classics  
Manual search for a higher  
frequency  
Selection of the stored station/  
Storing of a station: press for  
more than 2 seconds  
Manual search for a lower  
frequency  
26  
AUDIO  
2
Stereo reception  
Automatic station search  
Manual station search  
When the audio equipment receives  
a station broadcasting in stereo it au-  
tomatically transmits stereo sound  
and the screen displays "ST". If the  
reception conditions deteriorate, the  
audio equipment returns to mono  
transmission and "ST" is no longer  
displayed.  
Press this button twice  
to select the next sta-  
tion.  
Press one of these  
two buttons briefly to  
increase or decrease  
the frequency dis-  
played respectively.  
If you maintain the  
pressure on the button  
in the chosen direc-  
Press this button briefly to listen to  
each station available on the FM  
waveband for three seconds. To stop  
the station scan, press this button  
again.  
If the traffic information programme  
TA is selected, only stations which  
broadcast this type of programme  
are selected.  
Selection of the radio source  
tion, the frequency will be scanned  
continuously.  
The scan stops when you release the  
button.  
Press this button.  
Manual station storing  
Selection of a waveband  
Press the button suc-  
cessively to select  
the wavebands FM1,  
FM2, FM3 and AM.  
Select the required station.  
Press one of the buttons "1" to "6"  
for more than 2 seconds.  
An audible signal confirms that the  
station has been stored.  
27  
AUDIO  
2
Automatic storing of FM  
stations (autostore)  
Press this button.  
Recalling stored stations  
Radio reception  
Your audio equipment will  
be subjected to phenomena  
Your audio equipment  
automatically stores  
the six best transmit-  
which do not affect domestic radio  
sets. Both MW/LW and FM reception  
are subject to various forms of inter-  
ference. This is no reflection on the  
quality of the equipment but is due to  
the nature of the signals and the way  
in which they are transmitted.  
ters received on AM and FM in your  
current location. These stations are  
stored on the AM and FM3 wave-  
bands. The end of the search is sig-  
nalled by two audible signals.  
On each waveband, a brief press on  
one of the buttons "1" to "6" recalls  
the corresponding stored station.  
On MW/LW, interference may be no-  
ticed when passing under high voltage  
power lines or bridges, or in tunnels.  
On FM, interference may be the re-  
sult of increasing distance from the  
transmitter, deflection of the signal  
by obstacles (mountains, hills, build-  
ings, etc) or of being in an area which  
is not covered by a transmitter.  
If it was not possible to find  
six transmitters, the remain-  
ing memories remain empty:  
three dashes are displayed  
on the audio equipment screen for  
each empty memory.  
28  
AUDIO  
2
RDS  
Search by type of programme  
(PTY)  
EON system  
This system links stations which be-  
long to the same network. It permits  
the transmission of traffic information  
broadcast by a station which belongs  
to the same network as the station to  
which you are listening.  
Using the AF (alternative  
frequency) function on the FM  
waveband  
This enables you to listen to sta-  
tions which broadcast a type of pro-  
gramme which has a theme (NEWS,  
SPORTS, TALK, POP, CLASSICS).  
The RDS (Radio Data System) en-  
ables you to continue listening to the  
same station irrespective of the fre-  
quency that it uses in your current  
location. The audio equipment con-  
tinuously searches for the transmitter  
which provides the best reception.  
When FM is selected,  
press this button:  
In order to benefit from this, select the  
traffic information programme TA.  
-
-
"no pty" is displayed,  
then press the button briefly to  
The volume of the traffic in-  
formation is independent of  
the volume of normal radio  
listening.  
select a programme.  
After a few seconds without any ac-  
tion, your selection is stored.  
Press this button suc-  
cessively to activate  
or deactivate the func-  
tion.  
You can adjust it using the volume  
button, when the TA programme is  
being transmitted.  
The setting will be stored and will be  
used during subsequent message  
transmissions.  
Traffic information  
programme (TA)  
The screen will indicate:  
-
-
"AF" if the function is activated,  
"AF REG" if the function is  
activated at regional level,  
"AF" flashing if the function is not  
available.  
Press this button suc-  
cessively to activate  
or deactivate the func-  
tion.  
-
On FM, the multifunction display will  
indicate:  
-
"TP" or "TP EON": the radio  
transmits a programme while  
awaiting the broadcasting of  
traffic information.  
Regional mode (REG)  
Some stations, organised in a network,  
broadcast regional programmes in the  
various regions which they serve. The  
regional mode enables you to continue  
listening to the same programme.  
-
"TA" or "TA EON": the pro-  
gramme transmitted by the radio  
is put on standby while awaiting  
the broadcasting of traffic infor-  
mation.  
If you wish to interrupt the transmis-  
sion of a message, press this button  
again.  
29