Advertisement

Advertisement

Checks -> Checking the levels for Your Citroen C1 4 Door First Generation (2005-2014)

CHECKS  
CHECKING THE LEVELS  
Oil level  
8
Changing the brake fluid  
Windscreen wash level  
The brake fluid must be changed at  
the intervals stated, according to the  
manufacturer's servicing schedule.  
Use fluids recommended by the  
manufacturer, which fulfil DOT4  
standards.  
For best quality cleaning and for your  
safety, we would advise that you  
use products recommended by your  
manufacturer.  
Contact a CITROËN dealer or a  
qualified workshop.  
Check the level regularly and top up  
between changes. The maximum oil  
consumption is 0.5 litre per 600 miles  
(1 000 km).  
Check the level with the vehicle level,  
engine cold, using the dipstick.  
Cooling system  
Used oil  
Dipstick  
Avoid prolonged contact of used oil  
with the skin.  
Brake fluid is harmful to health and  
Only use the fluid recom-  
mended by the manufacturer.  
Otherwise, you risk seriously  
damaging your engine.  
There are two marks  
on the dipstick:  
A = maximum  
very corrosive.  
If you fill past this  
Do not dispose of used oil,  
brake fluid or coolant into  
drains or into the ground.  
mark,  
CITROËN dealer or a  
contact  
a
qualified workshop.  
B = minimum  
Never allow the level to  
fall below this mark.  
When the engine is warm, the  
temperature of the coolant is  
controlled by the engine fan. As this  
fan can operate with the ignition key  
removed and because the cooling  
system is pressurised, wait for at  
least one hour after the engine has  
stopped before carrying out any  
work.  
Empty the used oil into the  
containers provided for this  
purpose in the CITROËN dealer  
network or at a qualified workshop  
(France) or at an authorised waste  
disposal site.  
To maintain the reliability of  
engines and emission control  
systems, the use of additives  
in engine oil is prohibited.  
Slacken the cap by 1/4 of a  
turn to release the pressure  
to prevent any risk of  
scalding. When the pressure  
has dropped, remove the cap and  
top up the level.  
Oil change  
According to the information given in  
the servicing booklet.  
Oil viscosity grade  
In all cases, the oil selected must meet  
the manufacturer's requirements.  
70