ANTIꢀINTRUSION ALARM
Deactivation of the alarm
usng the remote control
The alarm is disarmed when you
unlock the vehicle (with a press on
button B on the remote control).
Deactivation of the alarm
with the key
II
Unlock the doors with the key. The
siren triggers. Enter the vehicle,
insert the key in the ignition and turn
it to the drive position to stop the
siren. Otherwise the siren will conꢀ
tinue for approximately 30 seconds.
1
A
B
Your vehicle may be equipped with
anANTIꢀINTRUSIONALARM. This
provides:
The installation also has a siren,
and a warning lamp on the conꢀ
trol 1 which is visible from outside
the vehicle, indicating the three
possible statuses of the alarm:
Exterior perimeter protection
by means of detectors on the
vehicle access points (doors,
boot, bonnet) as well as on the
electrical supply.
Alarm not active (disarmed),
warning lamp off.
Alarm active (armed), the
warning lamp flashes slowly.
Alarm triggered (signalling an
intrusion), the warning lamp
flashes rapidly if the alarm is
deactivated by a press on the
control B. It stops as soon as
you switch on the ignition.
Interior volumetric protection
by means of ultrasonic sensors
(detecting movement inside the
passenger compartment). This
can be deactivated using the
control 1
Note: If there is a malfunction,
the warning lamp remains perma-
nently on.
23
English 