Get Radio Source Guide for Citroen C2 4 Door First Generation (2003-2009)

R ADIO SOURCE

OTES ON RADIO RECEPTION

ANUAL SEARCH

Your Navidrive system will be subject to

phenomena not encountered by your equipꢀ

ment you have at home. The reception of AM

and FM signals may suffer from interference,

which is caused by the nature and propagaꢀ

tion of the signals and does not reﬂect on the

quality of your radio installation.

A short press on one of the buttons H or I

will respectively increase or decrease the

displayed frequency.

By keeping button H or I pressed, you will

be able to scroll through the waveband.

Scrolling stops as soon as a station is found.

NaviDrive remains tuned to the frequency

displayed.

In AM, the reception may be affected when

passing under power lines or bridges, or

when travelling through tunnels.

In FM mode, the reception may be affected by

the distance from the station transmitter, the

reﬂecting of signals off obstacles (mountains,

hills, tower blocks) and radio blackspots (no

coverage from the station transmitter).

MANUAL PREꢀSETTING

Select the waveband and memory bank

required using button R

Select a station using either automatic or

manual search.

Keep pressing for more than two seconds

on one of the preꢀselection buttons 1 to 6

on the keypad W

A window opens on the screen, the station is

memorised as it is displayed on the memory

number you have given it.

ONTEXTUAL MENU FOR

ADIO

SOURCE

A press on G while listening to the radio

permits you to :

ꢁ Enter the desired frequency

ꢁ Activate/deactivate the RDS search

function in FM

ꢁ Activate/deactivate the regional search

mode in FM

ꢁ Activate/deactivate the display of

Radio Text, broadcast by the radio station

if available (“RT” displays at the bottom

of the screen).

SELECTION OF FREQUENCIES AND

MEMORY BANKS

By repeated presses on button R, the

NaviDrive changes successively between

the memory banks FM1, FM2 and FMast,

corresponding to FM frequencies, and to

the memory bank MW/LW, corresponding

to AM frequencies.

R ADIO SOURCE

UTOMATIC SEARCH

UTOMATIC MEMORISATION OF TRANS

ꢀ

MITTERS (AUTOSTORE FUNCTION)

A short press on one of the buttons M or N

will tune into higher or lower radio stations

respectively, within the chosen waveband.

In FM, if you keep pressing for more than

two seconds on button R, your NaviꢀDrive

will automatically memorise the 6 strongest

transmitters on the FMast memory bank.

By keeping one of the buttons M or N

pressed, you can scroll continuously through

the waveband. The scrolling will stop at

the ﬁrst station it ﬁnds once the button is

released.

You can also do this by means of controls 2

and 3 at the steering wheel.

If NaviDrive did not manage to capture a

station on a frequency known to you (recepꢀ

tion very weak), you can perform a manual

search for this station.

NaviDrive memorises the 6 strongest transꢀ

mitters by deleting the 6 previously memoꢀ

rised.

After the memorisation, NaviDrive goes

immediately to memory 1 of the FMast

memory bank.

Note :

ꢁ

If the trafﬁc information function has been

activated (see RDS SYSTEM), the stations

offering this facility will be memorised

as priority.

SEARCHING FOR A STATION IN A

SORTED LIST

UNING SENSITIVITY

Automatic searches can be carried out

according to two levels of sensitivity :

ꢁ If it is unable to memorise any new staꢀ

tions, the system will retain the previously

memorised stations.

If the system is unable to ﬁnd 6 stations,

the unfilled memory slots will remain

unchanged.

To search for a station in a sorted list, your

installation periodically updates the list of

the stations received around your vehicle.

It shows you what stations are available,

ﬁrst in alphabetical order, then by frequency

in ascending order if the names are not

known.

ꢁ To capture the most powerful transmitꢀ

ters, choose the local search mode “LO”

(default option).

ꢁ To capture the weakest or most distant

transmitters, choose the sensitive search

mode “DX”.

To access this list, give a short press on

Search for a station is done ﬁrst in “LO”

(local) sensitivity, then in “DX” (distant)

sensitivity.

To commence a search in sensitivity “DX”

(distant) immediately , press twice in succesꢀ

sion on one of the buttons M or N

button T

This list is updated automatically every 10

minutes.

You can update this list at any time, by givꢀ

ing a long press on button T when the list is

displayed on the multifunction screen.

Radio Source for Your Citroen C2 4 Door First Generation (2003-2009)

Related Topics

Popular Owner Manuals

Latest Owner Manuals