5
R ADIO SOURCE
Your radio will be subject to certain phenomꢀ
ena that are not encountered by domestic
systems.
Manual seearch is via buttons J or M
A short press on one of the buttons K or N
will tune into higher or lower radio stations
respectively, within the chosen waveband.
By keeping button J or M pressed, you will
be able to scroll through the waveband.
Scrolling will stop as soon as you release
the button. The radio will remain tuned to
the frequency that is displayed.
The reception of AM and FM signals may
suffer from interference, which is caused
by the nature and propagation of the signals
and does not reflect on the quality of your
radio installation.
In AM, the reception may be affected when
passing under power lines or bridges, or
when travelling through tunnels.
In FM mode, the reception may be affected
by the distance from the station transmitꢀ
ter, the reflecting of signals off obstacles
(mountains, hills, tower blocks) and radio
blackspots (no coverage from the station
transmitter).
By keeping button K or N pressed, you will
be able to scroll through the waveband. The
scrolling will stop at the first station it finds
once the button is released.
You can also do this by means of the controls
2 and 3 at the steering wheel.
If the automatic search is unable to tune
into a known frequency (perhaps owing to
very weak reception), it is possible to search
manually to find this station.
TUNING SENSITIVITY
Automatic searches can be carried out
according to two levels of sensitivity :
ꢁ To capture the most powerful transmitꢀ
ters, choose the local search mode “LO”
(default option).
ꢁ To capture the weakest or most distant
transmitters, choose the sensitive search
mode “DX”.
Search for a station is done first in “LO”
(local) sensitivity, then in “DX” (distant)
sensitivity.
To commence a search in sensitivity “DX”
(distant) immediately , press twice in succesꢀ
sion on one of the buttons K or N
D
ISPLAY AND SELECTION OF A STATION AVAILABLE IN THE AREA IN WHICH YOU
ARE TRAVELLING
Briefly press on button G to bring up a list of
stations, this is updated every 10 minutes.
You can also update this list at any time by
giving a long press on button G
To listen to one of these stations, select by
pressing buttons J or M and validate using
button L
S
ELECTION OF RADIO SOURCE Press button D to select the source.
You can also do this by means of control 5
at the steering wheel.
SELECTION OF FREQUENCIES AND
MEMORY BANKS
Press button E successively to go through
the memory banks FM1, FM2 and FM3,
for the FM waveband, and the memory
banks MW/LW, for the AM waveband.
English 