Child safety
"ISOFIX" mountings
Your vehicle is approved to the ISOFIX
regulations
This ISOFIX mounting system provides reliable,
safe and fast fitting of the child seat in your
vehicle.
The seats represented below, are fitted with
regulation ISOFIX mountings.
ISOFIX child seats are fitted with two latches
which are secured easily on these rings A
Some also have a top tether belt which can be
attached to ring B.
To attach this belt, raise the head restraint
of the seat, then pass the buckle between
the rods. Then fix the buckle on ring B,
then tension the top tether belt.
7
-
a ring B, located in the roof, with the TOP
TETHER logo, for fixing the top tether belt.
If a child is not installed in a vehicle
correctly, the child's protection in the
event of a collision will be compromised.
To know which ISOFIX child seats can be
installed in your vehicle, see the table of
seating positions for ISOFIX child seats.
The rear seats must be in the fully back position
to install ISOFIX seats.
There are 3 rings for each seat:
-
2 rings A, located between the backrest
and the seat cushion, identified by a label,
109
English 
