Advertisement

Advertisement

Visibility -> Lighting controls for Your Citroen C3 Picasso SUV Second Generation (2013-2017)

Visibility  
Lighting controls  
System for selection and control of the various front and rear lamps providing the vehicle's lighting.  
Manual controls  
The lighting is controlled directly by the driver  
by means of the ring A and the stalk B.  
A. Main lighting mode selection ring: turn it  
to position the symbol required facing the  
mark.  
Model without AUTO lighting  
Main lighting  
The various front and rear lamps of the vehicle  
are designed to adapt the driver's visibility  
progressively according to climatic conditions:  
-
sidelamps, to be seen,  
-
dipped beam headlamps to see without  
dazzling other drivers,  
Lighting off (ignition off) /  
Daytime running lamps (engine running).  
-
main beam headlamps to see clearly when  
the road is clear.  
Automatic illumination of  
headlamps.  
Sidelamps.  
Additional lighting  
Other lamps are installed to fulfil the  
requirements of particular conditions of  
visibility:  
Dipped headlamps or main  
beam headlamps.  
Model with AUTO lighting  
-
a rear foglamp to be seen from afar,  
front foglamps for even better forward  
vision.  
B. Stalk for switching headlamps: pull the stalk  
towards you to switch the lighting between  
dipped and main beam headlamps.  
-
In the lamps off and sidelamps modes, the  
driver can switch on the main beam headlamps  
temporarily ("headlamp flash") by maintaining a  
pull on the stalk.  
Programming  
Various automatic lighting control modes  
are also available according to the following  
options:  
Displays  
Illumination of the corresponding indicator  
lamp in the instrument panel confirms that the  
lighting selected is on.  
-
-
guide-me-home lighting,  
automatic illumination of headlamps.  
72  
Visibility  
C. Foglamp selection ring.  
The foglamps operate with the dipped and main  
beam headlamps.  
When the lighting is switched off automatically  
(with AUTO model) or when the dipped  
headlamps are switched off manually, the  
foglamps and sidelamps will remain on.  
Model with rear foglamp only  
F
Turn the ring rearwards to switch off the  
foglamps, the sidelamps will then switch off.  
Rear foglamp  
F
To switch on the foglamp, turn the ring C  
forwards.  
When the lighting is switched off automatically  
(with AUTO model), the foglamp and the dipped  
beam headlamps will remain on.  
5
In good or rainy weather, by both day  
and night, the front foglamps and the  
rear foglamp are prohibited. In these  
situations, the power of their beams  
may dazzle other drivers.  
F
To switch off all of the lighting, turn the  
ring C rearwards.  
Do not forget to switch off the front  
foglamps and the rear foglamp when  
they are no longer necessary.  
Front and rear foglamps  
Model with front foglamps  
and a rear foglamp  
Rotate and release the ring C:  
F
F
F
F
forwards a first time to switch on the front  
foglamps,  
forwards a second time to switch on the  
rear foglamp,  
rearwards a first time to switch off the rear  
foglamp,  
rearwards a second time to switch of the  
front fog lamps.  
73  
Visibility  
Manual guide-me-home  
lighting  
The temporary illumination of the dipped beam  
headlamps after the vehicle's ignition has been  
switched off makes the driver's exit easier  
when the light is poor.  
Lighting on audible warning  
When the ignition is switched off, all  
of the lamps switch off automatically,  
unless guide-me-home lighting is  
activated.  
If the lighting is switched on manually  
after switching off the ignition, there  
is an audible signal when a front door  
is opened to warn the driver that they  
have forgotten to switch off the vehicle's  
lighting, with the ignition off.  
In some weather conditions (e.g. low  
temperature or humidity), the presence  
of misting on the internal surface of the  
glass of the headlamps and rear lamps  
is normal; it disappears after the lamps  
have been on for a few minutes.  
Switching on  
F
With the ignition off, "flash" the headlamps  
using the lighting stalk.  
F
A further "headlamp flash" switches the  
function off.  
Switching off  
The manual guide-me-home lighting switches  
off automatically after a set time.  
74  
Visibility  
Automatic illumination of  
headlamps  
Linked with the Guide-me-home  
lighting  
Association with the automatic illumination  
of headlamps provides the guide-me-home  
lighting with the following additional options:  
Operating fault  
The sidelamps and dipped beam headlamps are  
switched on automatically, without any action on the part  
of the driver, when a low level of external light is detected  
or in certain cases of activation of the windscreen wipers.  
As soon as the brightness returns to a sufficient level or  
after the windscreen wipers are switched off, the lamps  
are switched off automatically.  
In the event of a malfunction of the  
sunshine sensor, the lamps come  
on, this warning lamp is displayed  
in the instrument panel and/or a message appears  
in the multifunction screen, accompanied by an  
audible signal.  
-
automatic activation of guide-me-home  
lighting when automatic illumination of  
headlamps is switched on (in the vehicle  
parameters of the multifunction screen  
configuration menu),  
Contact a CITROËN dealer or a qualified workshop.  
5
-
selection of the duration of maintaining of  
the lighting for 15, 30 or 60 seconds in the  
vehicle parameters of the multifunction  
screen configuration menu (except for  
monochrome screen A where this is  
preset).  
In fog or snow, the sunshine  
sensor may detect sufficient light.  
Therefore, the lamps will not come on  
automatically.  
Do not cover the sunshine sensor,  
linked with the rain sensor and located  
in the centre of the windscreen behind  
the rear view mirror; the associated  
functions would no longer be controlled.  
Activation  
F
Turn ring A to the "AUTO" position. The automatic  
illumination of headlamps is accompanied by a  
message in the multifunction screen.  
Deactivation  
F
Turn ring A to a position other than  
"AUTO". Deactivation is accompanied by a  
message in the multifunction screen.  
75