Visibility
Automatic rain sensitive
windscreen wipers
Vertical windscreen wiper
position
The windscreen wipers operate automatically,
without any action on the part of the driver, if rain
is detected (sensor behind the rear view mirror),
adapting their speed to the intensity of the rainfall.
It is accompanied by a message in the
screen.
The automatic rain sensitive wipers
must be reactivated if the ignition has
been off for more than one minute, by
pushing the stalk downwards.
5
This position allows the wiper blades to be lifted
for winter parking, cleaning or replacement
without damaging the bonnet.
In the minute following switching off of the
ignition, any action on the wiper stalk positions
the wipers vertically.
Operating fault
If an automatic wiping malfunction occurs, the
wipers will operate in intermittent mode.
Have it checked by a CITROËN dealer or a
qualified workshop.
Activation
This is controlled manually by the driver by
pushing the stalk downwards to the "AUTO"
position.
To park the wipers after this has been done,
switch on the ignition and operate the wiper stalk.
It is accompanied by a message in the screen.
Do not cover the rain sensor, linked with
the sunshine sensor and located in the
centre of the windscreen behind the rear
view mirror.
Switch off the automatic rain sensitive
wipers when using an automatic car wash.
In winter, to avoid damaging the wiper
blades, it is advisable to wait until the
windscreen is completely clear of ice
before activating the automatic rain
sensitive wipers.
To retain the effectiveness of the flat
wiper blades, it is advisable to:
-
-
handle them with care,
clean them regularly using soapy
water,
-
-
not use them to hold a sheet of
cardboard against the windscreen,
replace them at the first signs of
wear.
Switching off
This is controlled manually by the driver by
moving the stalk upwards then returning it to
position "0".
81
English 