Access
Remote control problem
Following disconnection of the vehicle battery,
replacement of the remote control battery or in
the event of a remote control fault you can no
longer unlock, lock or locate your vehicle.
F
First of all, use the key in the lock to unlock
or lock your vehicle.
F
Then, reinitialise the remote control.
Folding the key
Changing the battery
F
First press this button to fold the key.
Battery ref.: CR1620 / 3 volts.
If you do not press the button when folding
the key, there is a risk of damage to the
mechanism.
If the battery is flat, you are informed
by illumination of this warning lamp,
an audible signal and a message.
Reinitialisation
F
F
F
Switch off the ignition.
Turn the key to position 2 (Ignition on).
Press the closed padlock immediately for a
few seconds.
F
F
F
Unclip the casing using a coin at the notch.
Slide the flat battery out of its location.
Slide the new battery into its location
observing the original direction.
Clip the casing.
Locating your vehicle
F
Press the closed padlock to
locate your locked vehicle in a
car park.
F
Switch off the ignition and remove the key
from the ignition switch.
F
F
The remote control is fully operational again.
Reinitialise the remote control.
This is indicated by lighting of the courtesy
lamps and flashing of the direction indicators
for a few seconds.
If the problem persists, contact a CITRoËn
dealer as soon as possible.
64
English 