Access
Reinitialisation
In the event of a malfunction you have to
reinitialise the operation of the electric windows:
Safety anti-pinch
The one-touch front electric windows are fitted
with a safety anti-pinch function.
When the window rises and meets an obstacle,
it stops and partially lowers again.
F
F
F
release the switch and pull it again until the
window closes completely,
hold the switch for approximately
one second after closing,
press the switch to lower the window
automatically.
4
The safety anti-pinch function is not active
during these operations.
In the event of unwanted opening of the
window on closing (for example in the
presence of frost):
Always remove the key from the ignition
when leaving the vehicle, even for a
short time.
In the event of contact during operation
of the windows, reverse the movement
of the window. To do this, press the
switch concerned.
When the driver operates the
passenger electric window switches,
they should ensure that no one is
preventing correct closing of the
windows.
The driver should ensure that
passengers use the electric windows
correctly.
Deactivating the rear window and
door switches
F
F
F
press the switch beyond the point of
resistance and then release it: the
window opens completely,
then pull it immediately without
passing the point of resistance until
the window closes completely,
continue to hold the switch for
approximately one second after the
window has closed.
F
For the safety of your children, press
switch 5 to prevent operation of the rear
windows irrespective of their position.
With the indicator lamp on, the rear controls are
deactivated.
With the indicator lamp off, the rear controls are
operational.
The safety anti-pinch function is not
active during these operations.
This control also deactivates the interior
rear door controls* (refer to the "Child
safety - Electric child lock" section).
Be particularly aware of children when
operating the windows.
* depending on country.
67
English 