Ease of use and comfort
► Press lug A to release the head restraint and
raise it fully.
► Stow the head restraint securely.
Correct driving position
Front head restraints
3
For safety reasons, adjustments must
only be made when the vehicle is
stationary.
Height adjustment
Refitting a head restraint
► Insert the head restraint rods into the guides
in the corresponding seat backrest.
► Push the head restraint down as far as it will
go.
► Press the lug A to release the head restraint
and push it down.
Before taking to the road and to make the most
of the ergonomic layout of the instruments and
controls, carry out these adjustments in the
following order:
– head restraint height.
– seat backrest angle.
► Adjust the height of the head restraint.
– seat cushion height.
– longitudinal seat position.
– steering wheel height.
– rear view mirror and door mirrors.
Never drive with the head restraints
removed; they should be in place and
adjusted for the occupant of the seat.
Front seats
For safety reasons, seat adjustments
must only be made when the vehicle is
stationary.
► Upward: pull the head restraint up to the
desired position; the head restraint can be felt to
click into position.
► Downward: press lug A to lower the head
restraint.
Before moving the seat backwards,
ensure that there is no person or object
that might prevent the full travel of the seat.
There is a risk of trapping or pinching
passengers if present in the rear seats or of
jamming the seat if large objects are placed
on the floor behind the seat.
The adjustment is correct when the
upper edge of the head restraint is level
with the top of the head.
Once these adjustments have been
made, check that the instrument panel
can be viewed correctly from your driving
position.
Removing a head restraint
► Pull the head restraint fully up.
31
English 