Get Ease of use and comfort Guide for Citroen C3 SUV Fourth Generation (2022-2025)

Access

Next option to unlock the boot:

an audible signal, if the vehicle is travelling at

more than 5 km/h.

1.

Left - hand front

Right - hand front

2.

Back-up release

Control switch at console (depending on

version)

To manually unlock the boot in the event of a

battery or central locking failure.

To unlock the boot

Fold the rear seats to gain access to the lock

from inside the boot.

3.

4.

Left-hand rear

Right-hand rear

► Press the lever by following the arrow

direction to release the lock.

(depending on version)

To re-lock the boot If the problem persists,

the boot will remain locked after opening and

closing.

Windows

Electric windows

Control switch at driver door

Fold the rear seats to gain access to the lock

from inside the boot.

4 windows switches at driver side used to

control all respective windows.

► Press the lever by following the arrow

direction to release the lock.

1.

Left - hand front

Right - hand front

2.

26

Access

Closing

3.

4.

Left-hand rear

Right-hand rear

2

Pull the switch; the window stops as soon as

the switch is released.

Every doors contains respective window control

switches.

Deactivating the rear controls for the rear

electric windows

The red indicator lamp in the button comes on

and the lamp will remain lit until the controls

are reactivated.

The rear electric windows can still be controlled

using the driver's controls.

Rear manual windows

(Depending on version)

Control switch at side controls

► Turn the window handle located on the door

panel.

5. Deactivation of electric window controls

Operation

Opening

Press the switch; the window stops as soon as

the switch is released.

► One touch-down: press the switch past

its resistance point; the window opens

completely when the switch is released.

27

Ease of Use and Comfort

Backrest angle adjustment

Correct driving position

Front seats

Warning

Before moving the seat backwards,

For safety reasons, these adjustments

must only be carried out with the vehicle

stationary.

ensure that there is no person or object that

might prevent the full travel of the seat.

There is a risk of trapping or pinching

passengers if present in the rear seats or of

jamming the seat if large objects are placed

on the floor behind the seat.

Before taking to the road and to make the most

of the ergonomic layout of the instruments and

controls, carry out these adjustments in the

following order:

– seat backrest angle.

– seat cushion height.

Longitudinal adjustment

To adjust the seatback, lift the lever located

on the outboard side of the seat, lean back to

the desired position and release the lever. To

return the seatback, lift the lever, lean forward

and release the lever.

– longitudinal seat position.

– steering wheel height.

– rear view mirror and door mirrors.

– seat belt fastened.

Height adjustment

(Driver only, depending on version)

Raise the control bar and slide the seat

forwards or backwards.

► Release the bar to lock the seat in position

on one of the runners.

Warning

Once these adjustments have been

made, check that the instrument panel

can be viewed correctly from your driving

position.

Raise or lower the control as many times as

needed.

28

Ease of Use and Comfort

Head restraint height

adjustment

Warning

3

As a safety measure, these

adjustments must only be carried out with

the vehicle stationary.

Adjusting the height

(Depending on version)

Mirrors

Door mirrors

Warning

Objects viewed in the door mirror

on the passenger side are closer than

they appear. Be careful when moving to

the right. Using only this mirror could

cause an accident. Use the inside mirror or

glance over your shoulder to properly judge

distances to other objects.

Warning

Avoid stepping on these plastic parts -

Risk of injury or damaging the components!

Steering wheel

adjustment

Warning

Do not adjust the mirrors while driving.

You could lose control of your vehicle and

cause an accident.

Upwards:

Manual adjustment

Pull the head restraint up to the desired

position; you can feel the head restraint clicking

into position.

Downwards:

Press lug A to lower the head restraint.

When stationary, hold the steering wheel on

one hand and pull the control lever to release

the steering wheel.

Tip

The head restraint is correctly adjusted

when its upper edge is level with the top of

the head.

► Adjust the height to suit your driving

position.

► Push the control lever to lock the steering

Move the lever in any direction to adjust it.

wheel.

29

Ease of Use and Comfort

Manual adjustment with the control

Menu Settings for Mirror Folding:

Electric adjustment

(Depending on version)

This Menu option provide a comprehensive

Interface for adjusting and controlling the car’s

features and settings.

Vehicle settings :

N

0

km/h

H

F

Vehicle Settings

Move the lever in any direction to adjust it.

If the mirror unit has come out of its initial

position, with the vehicle stationary, push it

back into place manually or use the control.

There is no risk of breakage, even in frosty

weather.

Over Speed Alert

Remote Unlock

Mirrors

► Rotate the knob to the right or to the left to

select the corresponding mirror.

► Push the knob towards the direction to 3

which the mirror should be rotated.

C

E

451

km

60% . 123km

► Return the knob to its central position.

Electric folding/unfolding

Manual folding

The mirrors can be folded manually (parking

obstruction, narrow garage, etc.).

If the vehicle is so equipped, the mirrors can

be folded automatically from the inside,with

the vehicle parked and the ignition on:

-

Over speed alert: To adjust or disactivate

over-speed alerts to themselves within a

safe speed limits

Turn the mirror towards the vehicle.

Remote Unlock: Customize or disactivate

remote unlock functionality to unlock your

car through Keyfobs.

N

Mirror: To customize the position,

functionality, and features of the mirrors.

0

km/h

H

F

Menu

Vehicle Settings

User Settings

Move control A down.

Check: No Alert

Maintenance

Lock the vehicle from the outside.

Unlock vehicle from the outside.

The mirrors can be unfolded automatically from

the inside,with the vehicle parked and the

ignition on.

C

E

451

km

60% . 123km

-

Move the control A up.

30

Ease of Use and Comfort

Maintenance:

DISABLED:

User settings :

3

► ORVM will not get Folded or Unfolded

automatically once the vehicle is Locked or

Unlocked

N

0

km/h

ENABLED:

H

F

N

User Settings

Brightness level

Theme Selection

Unit Selection

0

km/h

H

F

Maintenance

Service in 1549 km

Language Selection

C

E

0

2000 km

451

km

60% . 123km

N

C

E

0

451

km

km/h

60% . 123km

F

Mirrors

Auto Fold

-

Brightness level : Adjusting the brightness

of lighting and displays in cluster.

E

-

A Trip Set for Maintenance reminder

462

km

33% . 55km

Theme Selection : Customize the visual

appearance of displays, controls and lighting

elements in the cluster.

system that helps keep track scheduled

maintenance or service intervals based on

the car’s usage (such as distance traveled).

-

Unit selection : Sets the vehicle display to

the preferred value. Units of our choice

depending on the region.

AUTO-FOLD (DISABLED & ENABLED)

► When the vehicle is locked, the ORVMs will

be folded automatically

► When the vehicle is unlocked, the ORVMs

will be unfolded automatically.

Language selection : Choice of preferred

language to communicate with the vehicle.

Rear view mirror

29⁰c

0

km/h

F

H

Mirrors

Depending on version, it is equipped with an

anti-dazzle system, which darkens the mirror

glass and reduces the nuisance to the driver

Auto Fold

User settings :

caused by the sun, headlights of other vehicles,

E

C

etc.

23km

km

31

Ease of Use and Comfort

Manual model

Repositioning the backrests

Caution

Day/night position (depending on version)

To avoid damage to the mirror during

cleaning, never spray any cleaning solution

directly onto the mirror. Apply the solution

onto a clean cloth and wipe the mirror clean.

Warning

First check that the outer seat

belts are lying vertically flat alongside the

backrest latching rings.

Rear seats

Put the backrest 2 in the upright position and

push it firmly to latch it home.

Folding the backrests

► Ensure that the outer seat belts were not

trapped during the operation.

Warning

Manoeuvring the backrests should

only be done when the vehicle is stationary.

Warning

Pull the lever to change to the anti-dazzle

"night” position.

Push the lever to change to the normal "day"

position.

Please note: an incorrectly latched

backrest compromises the safety of

passengers in the event of sudden braking

or an accident.

The contents of the boot may be thrown

forwards - risk of serious injury!

If necessary, move the front seats forward.

► Check that no person or object will

interfere with folding down the backrest

(e.g. clothing, luggage).

Adjustment

► Set the mirror to the normal “day” position.

Automatic "electrochrome model"

(Depends upon version)

► Check that the outer seat belts are lying flat

Upholster cleaning

on the backrest.

INTERIORS

SEAT AND FABRIC PARTS

1

Authorized 3M Product to clean fabric

upholstery and carpeting.

2

1

Warning

Do not use volatile solvents for

cleaning purposes. Many are potentially

flammable and if used in closed areas they

may cause respiratory ham.

The electrochrome system uses a sensor that

detects the level of exterior brightness and that

coming from the rear of the vehicle, in order

to automatically and gradually switch between

day and night usage.

Pull the Latch knob 1 up and fold the backrest 2

inwards to increase boot space.

32

Ease of Use and Comfort

Stain Repel Fabric Cleaning Procedure - If

Equipped.

leather is designed for easy cleaning, and

Authorized 3M Product leather cleaning applied

on a cloth to clean the leather seats as needed.

4. Central outlets

5. Floor outlets

3

Stain Repel seats may be cleaned in the

following manner:

Advice

Heating and Ventilation

Air intake

The air circulating in the passenger

compartment is filtered and originates either

from the exterior, via the grille located at the

base of the windscreen, or from the inside in air

recirculation mode.

-

Remove as much of the stain as possible by

blotting with a clean, dry towel.

Tip

Blot any remaining stain with a clean, damp

towel.

Using the ventilation and air

conditioning system

For tought stains, apply Authorized 3M

products damp cloth and remove stain. Use

a fresh, damp towel to remove soap residue.

► To ensure that air is distributed evenly,

keep the external air intake grilles at

the base of the windscreen, the nozzles,

the vents and the air outlets free from

obstructions.

► Operate the air conditioning system for at

least 5 to 10 minutes once or twice a month

to keep it in perfect working order.

► If the system does not produce cold air,

switch it off and contact a CITROËN dealer.

Controls

-

For grease stains apply Athuthorized 3M

Products to clean,damp cloth and remove

stain. Use a fresh, damp towel to remove

soap residue.

Depending on version, the controls are

accessible in the touch screen or are grouped

together on the centre console panel.

The demisting/de-icing controls for the

windscreen and the rear screen are located

below the touch screen, or on the centre

console panel located below the audio system.

-

Dot not any harsh solvent or any other form

of protectants on Stain Repel products.

Leather Surfaces

Authorized 3M Products is specifically

recommended for leather upholstery. Your

leather upholstery can be best preserved by

regular cleaning with a dump soft cloth. Small

particles of dirt can act as an abrasive and

demage the leather upholstery and should be

removed promptly with a damp cloth.

Stubborn soils can be removed easily with

a soft cloth and Authorized 3M ProductCare

should be taken to avoid soaking your lether

upholstery with any liquid. Please do not

use polishes oils, cleaning fluids, solvents,

detergents, or ammonia-based cleaners to clean

your leather upholstery.

Air distribution

Warning

Avoid driving for too long with the

ventilation off or with prolonged operation

of interior air recirculation. Risk of misting

and deterioration of the air quality!

Restriction

If the interior temperature is very

high after the vehicle has stood for a long

time in the sunshine, air the passenger

compartment for a few moments.

Put the air flow control at a setting high

enough to quickly change the air in the

passenger compartment.

1.

Windshield defroster outlets

NOTE:

2. Side defroster outlets

3. Side outlets

If equipped with light colored leather, it tends

to show any foreign material, dirt, and fabric

dye transfer more so than darker colors. The

33

Ease of Use and Comfort

Adjusting the air

distribution

Tip

Manual air conditioning

Condensation created by the air

conditioning results in a discharge of water

underneath the vehicle. This is perfectly

normal.

You can vary the air distribution turning the

thumbwheel 3 to the desired position:

Ventilation

Tip

Temperature-controlled air comes

out of the center and side outlets.

Servicing the ventilation and air

conditioning system

Ensure that the passenger compartment

filter is in good condition and have the filter

elements replaced regularly.

To ensure correct operation of the air

conditioning system, have it checked

according to the recommendations in the

Maintenance and Warranty Guide.

Bi-level ventilation

Temperature-controlled air comes

out of the floor outlets and cooler

air comes out of the center and side

outlets. When the temperature se-

lector 1 is in the fully cold or fully

hot position, the air from the floor

outlets and the air from the center

and side outlets will be the same

temperature.

1. Temperature adjustment

2. Air flow adjustment

3. Air distribution adjustment

4. Air conditioning on/off

Tip

5. Interior air recirculation / Exterior air

Battery charge level limitations

(Electric)

intake

Foot mode ventilation

When the battery charge level drops below

10%, air conditioning system functions are

limited.

When battery charge level is between 5%

and 10%, heater is turned off.

When battery charge level is between

0% and 5%: – All air conditioning system

functions are powered off.

– Compressor is switched off.

– Heater is switched off.

6. Rear screen demisting / defrosting

Temperature-controlled air comes

out of the floor outlets and the side

outlets. a small amount of air comes

out of the windshield defroster out-

lets and also comes slightly out of

the side defroster outlets.

(depending on version)

Temperature adjustment

Turn the thumbwheel 1 from blue (cold) to

red (hot) to adjust the temperature to your

requirements.

Foot mode and defrost ventilation

Temperature-controlled air comes

out of the floor outlets, the wind-

shield defroster outlets, the side de-

froster outlets and the side outlets.

Air flow adjustment

► Turn the thumbwheel 2 to choose the speed

of the ventilation fan (from 0 to 4).

When the air flow is reduced to a minimum, 3

ventilation stops.

34

Ease of Use and Comfort

With the air conditioning on, regulation of

temperature and interior air recirculation are

controlled manually.

Defrost

Tip

Temperature-controlled air comes

out of the windshield defroster out-

lets, the side defroster outlets and

the side outlets.

3

In cold weather with the engine cold,

the air flow is increased gradually until the

comfort setting has been reached, in order

to limit the delivery of cold air into the

passenger compartment.

On entering the vehicle, if the interior

temperature is much colder or warmer than

the comfort setting requested, there is

no need to alter the value displayed to

more quickly reach the required level of

comfort. The system automatically corrects

the temperature difference as quickly as

possible.

Air conditioning on / off

The air conditioning system is designed to

operate effectively in all seasons, with the

windows closed.

1. Automatic mode on

It is used to:

2. Temperature adjustment

3. Front defogging / demisting

4. Air distribution adjustment

5. Maximum A/C

-

lower the temperature in summer,

increase the effectiveness of the demisting

in winter, above 3°C.

Temperature adjustment

► Press button 4 to activate/deactivate the air

conditioning system.

► Push the button 2 up to increase the value or

down to decrease it.

The value displayed corresponds to a level of

comfort and not to a precise temperature.

It is possible to go beyond the minimum value

14 or the maximum value 28 by selecting

respectively LO or HI.

6. Interior air recirculation

7. Rear screen demisting / defrosting

8. Air conditioning on/off

9. Air flow adjustment

Tip

Air conditioning does not operate

when the air flow is disabled.

To obtain cool air more quickly, enable

interior air recirculation for a brief period.

Then return to the intake of exterior air.

Switching off the air conditioning may result

in some discomfort (humidity or misting).

Automatic mode

Air flow adjustment

This automatic mode ensures optimum

management of the passenger compartment

temperature, air flow and air distribution, based

on the selected comfort level.

► Press the button 1-AUTO to activate the

automatic mode of the air conditioning system.

► Press any of the other buttons than Auto and

temperature to deactivate the automatic mode

of the air conditioning system.

► Push the button 9 up to increase the air flow

or down to decrease it.

The air flow symbol is filled in or emptied

gradually, according to the value set.

Automatic air

conditioning

(Applicable as per model)

The air conditioning operates with the engine

running, but the ventilation and its controls can

be accessed with the ignition on.

35

Ease of Use and Comfort

Maximum air conditioning

Air conditioning on / off

Air distribution adjustment

This function automatically adjusts the

temperature setting to the lowest possible, the

air distribution towards the central and side air

vents, the air flow to maximum and activates

interior air recirculation.

The air conditioning system is designed to

operate effectively in all seasons, with the

windows closed.

It is used to: – lower the temperature in

summer.

► Pushing button 4 successively directs the air

flow towards:

Ventilation

Temperature-controlled air comes

out of the center and side outlets.

► Press button 5 to activate/deactivate the

function

– increase the effectiveness of the demisting in

winter, above 3°C.

► Press button 8 to turn the air conditioning

on/off

Bi-level ventilation

Interior air recirculation

Temperature-controlled air comes

out of the floor outlets and cooler

air comes out of the center and side

outlets. When the temperature se-

lector 1 is in the fully cold or fully

hot position, the air from the floor

outlets and the air from the center

and side outlets will be the same

temperature.

The intake of exterior air helps avoid and

eliminate misting of the windscreen and side

windows.

The recirculation of interior air allows the

passenger compartment to be isolated from

polluted air in areas of heavy traffic and inside

tunnels.

Warning

The air conditioning cannot operate

when the air flow adjustment 9 is set to

OFF.

Interior air recirculation

Tip

Foot mode ventilation

When required, this function also

allows faster heating or cooling of the air in

the passenger compartment.

Temperature-controlled air comes

out of the floor outlets and the side

outlets. a small amount of air comes

out of the windshield defroster out-

lets and also comes slightly out of

the side defroster outlets.

► Place the thumbwheel 5 in this

position to activate interior air recirculation.

When this position is selected, outside air is

shut off and inside air is recirculated. This

mode is suitable when driving through an area

with polluted air such as a tunnel or when

attempting to quickly cool down the vehicle.

► Press button 6 to recirculate the interior air

or allow the intake of exterior air.

Warning

Foot mode and defrost ventilation

Temperature-controlled air comes

out of the floor outlets, the wind-

shield defroster outlets, the side de-

froster outlets and the side outlets.

Avoid the prolonged recirculation of

interior air in order to ensure a good supply

of fresh air and reduce the risk of misting

(especially when several passengers are on

board or when the air is cold/damp, etc.).

► To restore exterior air intake

and activate fresh air circulation, place the

thumbwheel 5 in this position.

Outside air is introduced.

Defrost

Temperature-controlled air comes

out of the windshield defroster out-

lets, the side defroster outlets and

the side outlets.

36

Ease of Use and Comfort

► Press the button 7 to activate/

deactivate the function (confirmed

by the indicator lamp coming on/

switching off).

Cupholders

Defogging / Demisting

3

6. Door pockets

The air conditioning system is designed to

operate effectively in all seasons. However,

during winter or high humid conditions, it is

recommended to use the following settings to

defog or demist the wind shield quickly:

► Push the A/C button 4 on.

7.

Wireless Smartphone Charger

Demisting / defrosting switches off

automatically to prevent an excessive

consumption of electrical current.

Glove box

Restriction

Switch off demisting / defrosting as

soon as you no longer consider it necessary,

as reducing the consumption of electrical

current reduces fuel consumption.

► Place the thumbwheel 5 in this

position to activate fresh air circulation.

► Place the air flow adjustment and

the air distribution thumbwheels 2 and 3 to the

defrost position.

► Set the temperature knob 1 to the desired

position.

Interior fittings

To open the glove box, lift the handle.

► Once fog/mist clears, set the temperature

knob 1 to the desired position.

Make sure you have a clear view through the

wind shield for your safety.

Warning

Never drive with the glove box open

when a passenger is at the front. It may

cause injury during sharp deceleration!

Tip

Use the A/C system effectively by

adjusting the temperature to the desired

position.

USB sockets

(Depending on version)

Rear screen demisting/

defrosting

1.

Sun visor

2. Closed storage or glove box

3. Type-A socket

(Depending on version)

Demisting / defrosting only operates with the

engine running.

4. 12 V socket

They allow the connection of a portable device

to charge the device.

5. Storage compartment

37

Ease of Use and Comfort

As you read this manual, you may find

information that is preceded by a NOTICE

symbol. This information is intended to help

you avoid damage to your vehicle, other

property, or the environment.

Type-A port located at the front allows iPod and

Type-A drive to be connected for audio/video.

Two rear Type-C ports are for charging purpose

only, with facility on supported smartphones.

Wireless smartphone

charger

12 V sockets

Warning

-

When charging a smartphone or

other devices supported by the

charger, do not handle or view the

device while driving. Doing so will

interfere with driving, which could

result in a crash.

-

Do not place any supported devices or

products on the charger if its surface

area is larger than the top surface of the

charger or if there is the possibility that it

may fall off (roll off, topple over, etc.) the

charger.

1.

On / Off

SPECIAL MESSAGES

We provide many important safety messages

in this manual. For your safety and safety of

others, pay special attention to all warnings

To connect a 12 V accessory (maximum power:

120 W), lift the cover and plug in the correct

adapter.

Should a supported device or product

fall of the wireless charger while driving,

do not pick it up while the vehicle

is still moving. Doing so will interfere

with driving, which could result in a

crash. Instead, park the vehicle in a safe

location, and the pick it up.

preceded by this alert symbol

Failure to follow the warnings contained in this

manual can result in serious injury or accident.

.

Warning

Do not exceed the maximum power

rating of the socket (you may otherwise

damage your portable device).

You WILL be KILLED

DANGER

or SERIOUSLY HURT

if you don't follow the

instructions

-

Do not use the charger if it is

malfunctioning. In the unlikely event

that the charger emits smoke, abnormal

odors or unusual sounds stop using

immediately.

You CAN be KILLED

WARNING

or SERIOUSLY HURT

if you don't follow the

instructions.

Caution

You CAN be HURT if

CAUTION

-

Metal objects between the charger

and the device to be charged will

get hot and can burn you.

you don't follow the

instructions.

38

Ease of Use and Comfort

charging area, place the device near the

center of the charging pad.

-

Remove foreign objects from the charger

before charging device.

-

Do not operate wireless charger under high

vehicle cabin temperature as it might raise

the mobile phone temperature.

3

-

It may not be possible to charge a

supported device under the following

conditions.

The charger supports fast charging.

However, the charging speeds may be

reduced based on the phone compatibility/

specification.

HANDLING INSTRUCTION

-

Do not place a metal objects, coins, pencil

lead, etc., to the charger.

●

The mobile phone is already fully

charged.

-

In Case of Simultaneous Charging (Phone

charge by wire & Wireless Charger at the

same time) Normally Phone will prefer wire

connection.

Do not use the charger when the charger is

covered with a towel, layer of dust, etc.

The mobile phone has become very hot

as a result of charging.

Do not allow the charger to get wet from

water, beverages, etc.

The vehicle ts in a location where strong

radio waves or noise is being generated,

such as TV towers, electric power plants

or gas stations.

-

Some phones may display weak current

messages. This is due to phone

characteristics only and not a malfunction.

Do not wipe the charger with oils, alcohol,

benzine, thinners, etc. or expose it to hair

sprays, insecticide sprays, etc. Do not touch

the device with wet hands.

-

If the charger becomes dirty, wipe off the

dirt using a clean damp cloth.

The function of the charger cannot be used

with a mobile phone whose shape or size

will not allow the supported device to be

fully placed on the charging area of the

wireless charger.

-

Do not use the charger if it is

Before proceeding with charging, read the

instructions provided with the mobile phone

as well.

malfunctioning. In the unlikely event that

the charger emits smoke, abnormal odors, or

unusual sounds, stop use immediately.

-

During charging and immediately after

charging, the charger and mobile phone

will be warm. This is normal and not

malfunction.

-

Wireless charging process will generate

some heat and the charger will cease

operation if the module temperature

reaches certain point. The operation will

resume once the temperature gets back to

normal.

If any person in vehicle is using a pacemaker,

biventricular pacing pulse generator, cardiac

defibrillator, or other medical device, kindly

consult the doctor before using the wireless

charger.

Only one mobile can be charged at a time

even when more then one device has been

placed in the charging area. Do not put

more mobile phones on top of the charger.

-

Do not subject the charger to strong forces,

excessive weights or impact. Doing so may

cause injury and/or malfunction.

-

Do not attach an anti-slip mat or stickers to

the charger. The presence of an anti-slip mat

or stickers between the mobile phone and

the charger may prevent the charger from

charging.

The phone may not charge, or efficiency of

the charger may reduce, or lead to heat up

if the phone is not aligned to the center

of the wireless charger pad. For best result

place the phone on the center of the

charging pad.

Do not place magnetic storage devices/

media in the charging area during charging

as the device might malfunction.

If a cover or decorative accessory that

does not comply with the Qi wireless

power standard has been attached to the

supported device, it may not be possible

for the device to be charging depending on

the maternal, thickness, etc. of the cover or

accessory. In such cases, remove attached

cover or accessory.

In hot weather, the inside of the vehicle

could reach extremely high temperature,

which may cause this device to malfunction.

-

The charger has some magnetic parts which

might attract metal objects (Like Keys,

coins, screws, etc.,).

-

Do not attempt to dis-assemble, repair, or

modify the wireless charger.

If charging does not start even after the

supported device has been placed in the

39

Ease of Use and Comfort

Note:

-

The charger consumes a large amount of

power. Do not use the charger for extended

periods of the time while the engine

is stopped. The capacity of the vehicles

battery may drop, possibly affecting the

ability of the engine to start.

-

Some Qi-compatible phones may not

cause LED Purple light to illuminate

when charging is only due to device

specifications.

-

If the device is not fully charged but Purple

LED is illuminated, it is not a defect of the

charger.

DIRECTIONS OF USE

This wireless charger is used for charging

mobile devices compatible with Qi wireless

charging standard. It will automatically connect

to the mobile device to ensure optimum

charging performance.

The charger supports fast charging.

However, the charging speeds may be

reduced based on the phone compatibility.

Some phones may display Weak current

messages. This is due to phone

characteristics only and not a malfunction.

Follow below steps to use the Wireless

charger.

Wireless charging process will generate

some heat and the charger will cease

operation if the module temperature

reaches certain point. The operation will

resume once the temperature gets back to

normal.

Switch on ACC or IGN Position in Vehicle.

► Place the Qi compatible mobile device at

the center of the charger with screen facing

upwards.

► The charger if not required, can be turned

off anytime by pressing the switch. Press

the switch again to tum On.

The symbol Φ and word Qi are registered

trademarks in many jurisdictions. Use of

these trademarks requires a license. The

trademark license is granted only for products

that are registered in Product Registration

database. The certificate of registration can be

withdrawn by the Wireless Power Consortium.

For actual status consult the website (http://

www.wirelesspowerconsortium.com/products)

SWITCH FUNCTION AND LED

DEFINITION

COLOUR

White

Red

DEFINITION

Power Off

Power On / Stand By

Charging in Progress

Charging Complete

Blue

Purple

Blue Blink-

ing

Foreign Object Detected /

Phone Not In Position

40

Ease of Use and Comfort

TROUBLE SHOOTING GUIDE

3

SYMPTOM

POSSIBLE CAUSES

SOLUTION

Case/ cover is too thick or has metal items

Vehicle turned off

Remove cover and try charging again

Turn ON ACC

Not Charging

Wireless charger switch is tumed off

Mobile device not properly positioned

Press the switch to tum On wireless charger

Place the device at the exact center of the

charging pad

Non-Compliant device

Foreign object detected

Check device specification

Remove any objects (keys/ coins/ access cards,

etc.)

Blue LED Blinking

Mobile device too hot

Stop charging and wait for the device to cool

down before charging again

Unable to turn on Wireless charger. No LED illu- Fuse is blown

mination

Seek professional assistance to check the fuse

Low power supply

Please check if the power supply of battery is

less than 12V

Slow charging

41

Ease of Use and Comfort

CAUTION

DO

DON'Ts

The phone may not charge, or efficiency of the charger may reduce, or

Use the device with engine turned-on condition only, to avoid quicker lead to heat up if the phone is not aligned to the center of the wireless

battery discharge.

charger pad. For best result place the phone on the center of the charg-

ing pad.

Do not operate a mobile device while driving as it may cause serious

distractions.

Always handle the device with clean and dry hands only.

Do not keep any materials on the wireless charger like aluminium stickers,

metal objects, cloth etc., as this may become electro-statically charged or

may result in heat up. Magnetic stripe cards, bank cards (credit card, debit

card, etc.,), phone cards, storage devices, precision wristwatch if placed

to wireless charger may cause the device to malfunction or damage due

to magnetic field. Avoid device getting in contact with conductive mate-

rials. E.g., Metals, coins, pencil lead, etc. The charger has some magnetic

parts which might attract metal objects

If any person in vehicle is using a pacemaker, bi-ventricular pacing pulse

generator, cardiac defibrillator, or other medical device, kindly consult the

doctor before using the wireless charger.

Do not spill water or any other liquids on the surface of the wireless

charger to avoid the risk of damage and short circuit.

It is highly recommended to turn off wireless charger when not in use.

The wireless charger shall not be subject strong impacts or excessive

weight.

It is advised to remove the charging devices before starting the engine to

reduce the risk of unstable instantaneous power. .

Do not attempt to dis-assemble, repair, or modify the wireless charger

42

Ease of use and comfort for Your Citroen C3 SUV Fourth Generation (2022-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals