Ease of Use and Comfort
charging area, place the device near the
center of the charging pad.
-
Remove foreign objects from the charger
before charging device.
-
-
Do not operate wireless charger under high
vehicle cabin temperature as it might raise
the mobile phone temperature.
3
-
It may not be possible to charge a
supported device under the following
conditions.
The charger supports fast charging.
However, the charging speeds may be
reduced based on the phone compatibility/
specification.
HANDLING INSTRUCTION
-
-
-
-
Do not place a metal objects, coins, pencil
lead, etc., to the charger.
●
●
●
The mobile phone is already fully
charged.
-
In Case of Simultaneous Charging (Phone
charge by wire & Wireless Charger at the
same time) Normally Phone will prefer wire
connection.
Do not use the charger when the charger is
covered with a towel, layer of dust, etc.
The mobile phone has become very hot
as a result of charging.
Do not allow the charger to get wet from
water, beverages, etc.
The vehicle ts in a location where strong
radio waves or noise is being generated,
such as TV towers, electric power plants
or gas stations.
-
-
Some phones may display weak current
messages. This is due to phone
characteristics only and not a malfunction.
Do not wipe the charger with oils, alcohol,
benzine, thinners, etc. or expose it to hair
sprays, insecticide sprays, etc. Do not touch
the device with wet hands.
-
-
If the charger becomes dirty, wipe off the
dirt using a clean damp cloth.
The function of the charger cannot be used
with a mobile phone whose shape or size
will not allow the supported device to be
fully placed on the charging area of the
wireless charger.
-
-
Do not use the charger if it is
Before proceeding with charging, read the
instructions provided with the mobile phone
as well.
malfunctioning. In the unlikely event that
the charger emits smoke, abnormal odors, or
unusual sounds, stop use immediately.
-
-
-
During charging and immediately after
charging, the charger and mobile phone
will be warm. This is normal and not
malfunction.
-
Wireless charging process will generate
some heat and the charger will cease
operation if the module temperature
reaches certain point. The operation will
resume once the temperature gets back to
normal.
If any person in vehicle is using a pacemaker,
biventricular pacing pulse generator, cardiac
defibrillator, or other medical device, kindly
consult the doctor before using the wireless
charger.
Only one mobile can be charged at a time
even when more then one device has been
placed in the charging area. Do not put
more mobile phones on top of the charger.
-
-
-
Do not subject the charger to strong forces,
excessive weights or impact. Doing so may
cause injury and/or malfunction.
-
-
Do not attach an anti-slip mat or stickers to
the charger. The presence of an anti-slip mat
or stickers between the mobile phone and
the charger may prevent the charger from
charging.
The phone may not charge, or efficiency of
the charger may reduce, or lead to heat up
if the phone is not aligned to the center
of the wireless charger pad. For best result
place the phone on the center of the
charging pad.
Do not place magnetic storage devices/
media in the charging area during charging
as the device might malfunction.
If a cover or decorative accessory that
does not comply with the Qi wireless
power standard has been attached to the
supported device, it may not be possible
for the device to be charging depending on
the maternal, thickness, etc. of the cover or
accessory. In such cases, remove attached
cover or accessory.
In hot weather, the inside of the vehicle
could reach extremely high temperature,
which may cause this device to malfunction.
-
The charger has some magnetic parts which
might attract metal objects (Like Keys,
coins, screws, etc.,).
-
-
Do not attempt to dis-assemble, repair, or
modify the wireless charger.
If charging does not start even after the
supported device has been placed in the
39
English 
