Driving
To modify the speed limiter setting using
the speed suggested by the speed limit sign
recognition system:
F the speed suggested is displayed in the
instrument panel,
F make a first press on button 5; a message
is displayed to confirm the memorisation
request,
F press button 5 again to save the suggested
speed.
Once the vehicle slows down to the
programmed setting, the speed limiter is active
again: the speed setting display is fixed once
more.
Cruise control
System which automatically
maintains the speed of the vehicle
at the value programmed by the
driver, without any action on the
accelerator pedal.
Switching off
F Turn the wheel 1 to the position 0: the
display of information about the speed
limiter disappears.
The cruise control is switched on
manually.
The speed displays immediately in the
instrument panel as the new speed setting.
It requires a minimum vehicle speed of
25 mph (40 km/h) as well as:
Operating fault
-
-
with a manual gearbox, the
engagement of third or fourth gear or
higher,
with a automatic or electronic gearbox,
the engagement of second gear or
higher.
Temporarily exceeding the
speed setting
Flashing dashes indicate a fault with the speed
limiter.
Have it checked by a CITROËN dealer or a
qualified workshop.
F Press firmly on the accelerator pedal,
going beyond the point of resistance, to
exceed the programmed speed limit.
The speed limiter is deactivated temporarily
and the displayed programmed speed flashes.
The function remains active after changing
gear on vehicles fitted with an automatic
gearbox.
The cruise control is paused manually or by
pressing the brake or clutch pedal or if the ESC
system is invoked for safety reasons.
Once switched on, you can pause the cruise
control at any time by pressing button 4: the
screen confirms the pause.
On a steep descent or in the event of
sharp acceleration, the speed limiter will
not be able to prevent the vehicle from
exceeding the programmed speed.
The use of mats not approved by
CITROËN may interfere with the operation
of the speed limiter.
To avoid any risk of jamming of the pedals:
-
-
ensure that the mat is positioned
correctly,
do not fit one mat on top of another.
When the limit speed is exceeded but this is not
due to action by the driver, there is an audible
signal to supplement the visual alert (setting
flashes).
Switching off the ignition cancels any
programmed speed setting.
114
English 