Lighting and visibility
Switching on
Parking lamps
Vehicle side marking by illumination of the
Guide-me-home lighting
F With the ignition off, "flash" the headlamps
using the lighting control stalk.
F Another "headlamp flash" switches the
function off.
Automatic
sidelamps on the traffic side only.
When the automatic illumination of headlamps
is activated, if the ambient light level is
Switching off
low, the dipped beam headlamps come on
automatically when switching off the ignition.
The manual guide-me lighting goes off
automatically at the end of a given period of
time.
Activation or deactivation, as well as the
duration for the guide-me-home lighting can be
set in the touch screen.
Headlamp beam height
adjustment
F
In the Driving/Vehicle menu,
select the "Vehicle settings"
tab, then "Headlamps" and
activate/deactivate "Guide-Me-
Home Lighting".
F Depending on version, within one minute
of switching off the ignition, operate the
lighting control stalk up or down depending
on the traffic side (for example, when
parking on the right, move the lighting
control stalk downwards; the left-hand
sidelamps light up).
Manual
This is confirmed by an audible signal and
illumination of the corresponding direction
indicator lamp in the instrument panel.
To switch off the parking lamps, return the
lighting control stalk to the central position.
To avoid causing a nuisance to other road
users, the headlamp beams should be adjusted
for height according to the vehicle's load.
0. Driver only or driver + front passenger.
-. Driver + front passenger + rear
The temporary illumination of the dipped beam
headlamps after the vehicle's ignition has been
switched off makes the driver's exit easier
when the light is poor.
passengers.
64
English 