D R I V I N G
ELECTRIC PARKING BRAKE
Manual application
Manual release
With the vehicle stationary, to apply
the parking brake whether the engine
is running or off, pull on control A.
With the ignition on or the engine
running, to release the parking
brake, press on the brake pedal, or
the accelerator, pull then release
control A.
The application of the parking brake
is confirmed by:
The full application of the parking
brake is confirmed by:
-
the lighting of the warning
lamp P on control A and
on the instrument panel,
-
the extinction of the warn-
ing lamp Pon control Aand
on the instrument panel,
-
the display of a message "hand-
brake on" on the multifunction
screen.
-
the display of a message "hand-
brake off" on the multifunction
screen.
The electric parking brake operates
as follows:
If you pull control A without pressing
the brake pedal, the parking brake
will not be released and the "Foot on
brake" warning lamp will light up on
the instrument panel.
When the driver’s door is
opened with the engine run-
ning, a beep is heard and a
-
Automatic application/release
Application is automatic when the
engine stops, release is automatic
on use of the accelerator.
message displayed if the parking
brake has not been applied.
-
Manual application/release
Before getting out of the vehicle,
check that the warning lamp P is lit
permanently on the instrument panel.
Manual application/release of
the parking brake is possible by
pulling control A while pressing
the brake pedal.
Copyright CITROEN compiled by C4owners.org
126
English 