Advertisement

Advertisement

Driving -> Audible and Visual Front and Rear Parking Assistance for Your Citroen C4 Grand Picasso SUV First Generation (2006-2013)

D R I V I N G  
Maximum application  
Automatic application,  
engine off  
Automatic release  
If necessary, you can utilise maxi-  
mum application of the parking  
brake. It is obtained by means of a  
long pull on control A, until you see  
the message "handbrake on" and a  
beep is heard.  
The electric parking brake releases  
automatically and progressively  
when you press the accelerator:  
Manual gearbox (first gear or  
reverse gear engaged): press  
down fully on the clutch pedal  
then press on the accelerator  
pedal and move off.  
Automatic gearbox: accelerate  
with the selector in position D,  
M or R.  
Electronic gearbox: accelerate  
with the selector in position A,  
M or R.  
With the vehicle stationary, the park-  
ing brake is automatically applied  
when the engine is switched off.  
Maximum application is essential:  
-
in the case of a vehicle towing  
a caravan or a trailer, if the au-  
tomatic functions are activated  
but you are applying the parking  
brake manually,  
-
-
when the gradient you are parked  
on is variable in its effect (e.g. on  
a ferry, in a lorry, during towing),  
in the case of towing, a loaded  
vehicle or parking on a gradient,  
turn the front wheels towards the  
pavement and engage a gear  
when you park,  
The application of the parking brake  
is confirmed by:  
Full release of the parking brake is  
confirmed by:  
-
the lighting of warning  
lamp P on control A and  
on the instrument panel,  
-
the extinction of warning  
lamp P on control A and  
on the instrument panel,  
-
after a maximum application, the  
release time will be longer.  
-
the display of a message "hand-  
brake on" on the multifunction  
screen (except NaviDrive).  
IX  
-
the display of a message "hand-  
brake off" on the multifunction  
screen.  
The normal operating sound will con-  
firm to you the application/release of  
your electric parking brake.  
When stationary, with the  
engine running, do not press  
the accelerator pedal unnec-  
essarily, as you may release  
the parking brake.  
Before leaving the vehicle,  
check that warning lamp P  
on the instrument panel is  
permanently lit.  
Never leave a ch
C
ild
o
a
p
lo
y
ne
r
i
in
g
s
h
id
t
e
t
C
h
e
I
T
ROEN compiled by C4owners.org  
vehicle with the ignition on, as they  
could release the parking brake.  
127  
D R I V I N G  
To immobilise the vehicle,  
engine running  
Activation/Deactivation of the  
automatic functions*  
Particular situations  
In certain situations (e.g. starting  
the engine), the parking brake can  
automatically alter its force. This is  
normal operation.  
To advance your vehicle (towing,  
etc.) without starting the engine, but  
with the ignition on, press on the  
brake pedal and release the park-  
ing brake by pulling then releasing  
control A.  
The full release of the parking  
brake is confirmed by the extinc-  
tion of warning lamp P (red) on the  
instrument panel and the display of  
a message "handbrake off" on the  
multifunction screen.  
If the parking brake malfunctions  
while applied or if the battery runs  
flat, an emergency release is always  
possible.  
The automatic application when the  
engine is switched off and the au-  
tomatic release when you press  
the accelerator can be deactivated.  
Activation/deactivation is performed  
using the configuration menu of the  
multifunction screen. To do so, select  
"Personalisation/Configuration/Define  
the Vehicle parameters/Driving assist-  
ance/Automatic handbrake."  
With the engine running and the ve-  
hicle stationary, in order to immobi-  
lise the vehicle you need to manually  
apply the parking brake by pulling  
on control A.  
The application of the parking brake  
is confirmed by:  
-
the lighting of warning  
lamp P on control A and  
on the instrument panel,  
The deactivation of these  
functions is confirmed by the  
lighting of this warning lamp  
on the instrument panel.  
-
the display of a message "hand-  
brake on" on the multifunction  
screen.  
With the automatic functions deacti-  
vated, the application and release of  
the parking brake are done manually.  
When the driver’s door is opened, a  
beep is heard and a message dis-  
played if the parking brake has not  
been applied.  
IX  
Before leaving the vehicle,  
check that warning lamp P  
on the instrument panel is  
permanently lit.  
Copyright CITROEN compiled by C4owners.org  
* According to country.  
128