I N S T R U M E N T S a n d C O N T R O L S
Service indicator zero reset
Oil level gauge fault
Engine oil level indicator
I
System which informs the driver
whether the engine oil level is cor-
rect or not.
This information is displayed for a
few seconds when the ignition is
switched on, after the service infor-
mation.
This is indicated by the flashing of
"OIL --". Contact a CITROËN dealer.
The level read will only be correct if
the vehicle is on level ground and
the engine has been off for more
than 15 minutes.
After each service, the service indi-
cator must be reset to zero.
The procedure for resetting to zero
is as follows:
switch off the ignition,
press and hold the trip distance
recorder zero reset button,
switch on the ignition; the distance
recorder display begins a count-
down,
Dipstick
Refer to the "Checks" section to lo-
cate the dipstick and the oil filler cap
on your engine.
Oil level correct
Oil level low
There are 2 marks on
the dipstick:
-
A = max; never ex-
ceed this level,
when the display indicates "=0",
release the button; the spanner
disappears.
-
B = min; top up the
level via the oil filler
cap, using the type
of oil suited to your
engine.
This is indicated by the flashing of
"OIL", accompanied by an audible
signal and a message on the multi-
function screen.
If the low oil level is confirmed by a
check using the dipstick, it is essential
that the level is topped up to prevent
damage to the engine.
Following this operation, if you wish
to disconnect the battery, lock the
vehicle and wait at least five minutes
for the zero reset to be taken into ac-
count.
Copyright CITROEN compiled by C4owners.org
32
English 