P R A C T I C A L I N F O R M AT I O N
Integrated direction indicator
side repeaters
Model with Xenon headlamps
and directional headlamps
Dual-function Xenon headlamps
(dipped/main beam)
If the headlamp bears this
symbol, any operation to
change the Xenon dual-
function directional head-
lamp (D1S-35 W) must be carried
out by professionals (risk of elec-
trocution).
Consult a CITROËN dealer.
It is recommended to change both
bulbs at the same time if one of
them is faulty.
To change the repeater, press down-
wards firmly on the zone indicated
by the arrow, then pull the repeater.
Repeaters can be obtained from a
CITROËN dealer.
1. Dual-function Xenon head-
lamps (dipped/main beam)
2. Additional main beams
(H7-55 W)
3. Sidelamps (H6 W-6 W)
Additional main beams
Remove the rubber cover.
Rotate the bulb-holder a quarter
turn anti-clockwise and remove it
from its housing.
(see previous page)
Replace the faulty bulb.
4. Direction indicators
(H21-21 W)
(see previous page)
Reposition the bulb-holder by
pushing it in, tightening it by a
quarter turn clockwise.
Refit the rubber cover.
XI
When using a high-pres-
sure washer on persistent
marks, do not direct the jet
at the lamps or their edges for too
long, so as to avoid damaging their
protective coating and seals.
CI
T
ROEN compiled by C4owners.org 176
English 