Get Monitoring Guide for Citroen C4 Grand Picasso SUV Second Generation (2013-2022)

Monitoring

7-inch touch screen tablet

The 7-inch touch screen tablet gives access to:

General operation

Recommendations

It is necessary to press firmly, particularly for

"flick" gestures (scrolling through lists, moving

the map...).

-

the heating/air conditioning controls,

menus for adjusting settings for vehicle

functions and systems,

Principles

Use the buttons on either side of the screen

for access to the menus, then press the virtual

buttons in the touch screen.

-

audio and display configuration menus,

audio system and telephone controls and

the display of associated information,

A light wipe is not enough.

Each menu is displayed over one or two pages

(primary page and secondary page).

and, depending on equipment, allows:

The tablet does not recognise pressing with

more than one finger.

This technology allows use at all temperatures

and when wearing gloves.

Do not use pointed objects on the touch screen

tablet.

-

the display of alert messages and the

visual parking sensors information,

access to the controls for the navigation

system and Internet services, and the

display of associated information.

-

Use this button to go to the

secondary page.

Do not touch the tablet screen with wet hands.

Uses a soft clean cloth to clean the tablet touch

screen.

Use this button to return to the

primary page.

After a few moments with no action on

the secondary page, the primary page

is displayed automatically.

For reasons of safety, the driver

should only carry out operations

that require close attention, with the

vehicle stationary.

Some functions are not accessible

when driving.

Use this button for access to

additional information and to the

settings for certain functions.

Use this button to confirm.

Use this button to quit.

26

Monitoring

1

Touch screen tablet menus

State of indicator lamps

Some buttons contain an indicator lamp that

gives the state of the corresponding function.

Green indicator: you have switched on the

corresponding function.

Orange indicator: you have switched off the

corresponding function.

1. Access the the "Air conditioning" menu.

Allows adjustment of the various settings

for temperature, air flow... See the sections

on "Heating", "Manual air conditioning" and

"Digital air conditioning".

2. Access to the "Driving assistance" menu.

Allows certain functions to be switched on

and off and their settings adjusted.

5. Access to the "Configuration" menu

Allows configuration of the display and the

system.

6. Access to the "Connected services*"

menu.

See the Audio and telematics section.

7. Access to the "Telephone" menu.

See the Audio and telematics section.

3. Access to the "Media" menu.

8. Adjustment of volume / mute.

See the Audio and telematics section.

4. Access to the "Navigation*" menu.

See the Audio and telematics section.

* Depending on equipment.

27

Monitoring

"Driving assistance" menu

The functions with settings that can be adjusted are detailed in the table below.

Button

Corresponding function

Speed settings

Comments

Memorisation of speeds for use with the speed limiter or cruise control.

Under-inflation initialisation

Park Assist

Reinitialisation of the under-inflation system.

Activation of the Park Assist function.

Deactivation of the function.

Stop & Start

Blind spot sensors

360 vision

Activation of the function.

Activation of the function then choice of options.

28

Monitoring

1

Button

Corresponding function

Vehicle settings

Comments

Access to other functions with settings that can be adjusted. The functions are grouped

together under three tabs:

-

"Driving assistance"

● "Automatic rear wiper in reverse" (Activation of rear wiper linked to reverse gear; see

the "Visibility" section),

● "Auto mirror dipping in reverse" (automatic dipping of door mirrors in reverse; see the

"Comfort" section).

"Lighting"

● "Guide-me-home lighting" (Automatic guide-me-home lighting; see the "Visibility" section),

● "Welcome lighting" (Exterior welcome lighting; see the "Visibility" section),

● "Adaptive lighting" (Cornering lighting / Directional lighting; see the "Visibility" section),

● "Mood lighting" (mood lighting; see the "Visibility" section).

"Vehicle access"

● "Tailgate motorisation" (Automatic operation of the tailgate; see the Access section),

● "Driver plip action" (Selective unlocking of the driver's door; see the Access section).

29

Monitoring

Button

Corresponding function

Diagnostic

Comments

List of current alerts.

Lane departure warning system

Parking sensors

Activation of the function.

Deactivation of the function.

Activation of the function.

Inter-vehicle time

Automatic headlamp dipping

30

Monitoring

1

"Conﬁguration" menu

The functions available through this menu are detailed in the table below.

Button

Corresponding function

Audio settings

Comments

Adjustment of volume, balance...

Colour schemes

Interactive help

Turn off screen

Brightness

Choice of a colour scheme.

Simplified instructions.

Turns the screen off.

Adjustment of brightness.

31

Monitoring

Button

Corresponding function

System settings

Comments

Choice of units:

-

temperature (°Celsius or °Fahrenheit)

distance and fuel consumption (l/100 km, mpg or km/l).

Time/Date

Setting the date and time.

Languages

Screen settings

Calculator

Calendar

Choice of language used (for the touch screen tablet and the type 2 instrument panel):

French, English, Italian, Spanish, German, Dutch, Portuguese, Polish, Turkish, Russian.

Adjustment of the display settings (scrolling of text, animations...)

Displays the calculator.

Displays the calendar.

32

Monitoring

1

Type 1 instrument panel

Dials and screens

Control buttons

Rev counter (x 1 000 rpm or tr/min),

graduation according to engine (petrol or

Diesel).

5. Fuel gauge.

6. Service indicator, then total mileage

recorder (miles or km).

These functions are displayed in turn when

the ignition is switched on.

7. Trip mileage recorder (miles or km).

8. Repeat of air conditioning information.

A. Main lighting dimmer buttons.

B. Recall servicing information.

Reset the function selected to zero (service

indicator or trip recorder).

2. Gear shift indicator, selector position

and gear for an electronic or automatic

gearbox.

3. Digital speedometer (mph or km/h).

4. Cruise control or speed limiter settings.

33

Monitoring

Type 2 instrument panel

This instrument panel is presented in the form of a 12-inch panoramic HD screen.

It can be personalised. Depending on the display mode selected, some information can be hidden (see "Personalisation of the instrument panel").

Dials and screens

Control button

A. Recall servicing information.

Reset the function selected to zero (service

indicator or trip recorder).

1. Rev counter (x 1000 tr/min or rpm)

("DIALS" mode).

5. Fuel gauge.

6. Total distance recorder (miles or km).

7. Trip distance recorder (miles or km).

8. Repeat of the air conditioning settings.

9. Repeat of the current media or telephone

information.

2. Gear shift indicator, position of the selector

lever and the gear on an electronic or

automatic gearbox.

3. Digital speedometer (mph or km/h).

4. Cruise control or speed limiter setting.

10. Repeat of the navigation information.

34

Monitoring

1

Display zones

Personalisation of

the type 2 instrument panel

Choosing the display mode

instrument panel, by choosing:

Each mode corresponds to the type of

information displayed in the configurable area.

-

a colour scheme,

a display mode.

Choosing a colour scheme

It depends on the colour scheme chosen for

the touch screen tablet. To modify it with the

vehicle stationary:

Whatever the display mode or colour scheme

chosen, the instrument panel contains

ꢀ

select the "Configuration" menu of the

touch screen tablet,

-

a fixed display zone A with:

● the speedometer,

ꢀ

press the "Color schemes" button,

choose a colour scheme,

confirm.

● the warning lamps,

● the fuel gauge,

The system restarts to take account of the

modifications to the touch screen tablet

and the instrument panel.

● the various repeated information and

alert messages.

a configurable display zone B

-

"DIALS": permanent display of the

trip computer, rev counter and coolant

temperature indicator.

-

Most of the warning lamps do not have a fixed

position.

The warning and indicator lamps in the left

hand column are displayed from top to bottom

in order of importance.

For certain functions that have indicator lamps

for both on and off, there is just one dedicated

location.

35

Monitoring

-

"MEDIA": display of information related to

the media being played or the radio.

-

"NAVIGATION": display of information

related to the navigation in progress (map

and instructions).

-

"PHOTOS": display of the photo selected

in the "Media" menu of the touch screen

tablet.

36

Monitoring

1

-

"DRIVING": used for the display of the

inter-vehicle time and information related to

the active cruise control.

The recommended speed is displayed in

the central part.

To modify the display mode of the instrument

panel:

ꢀ

once the selected display mode appears

in the central window, press the wheel to

confirm your choice.

ꢀ

turn the wheel on the left of the steering

wheel to display and run through the

different modes in the right hand part of the

instrument panel,

The new mode is applied immediately.

The driver remains responsible for

observing the driving regulations.

37

Monitoring

Indicator and warning lamps

Visual indicators informing the driver that a

system is in operation, switched off or has a

fault.

Associated warnings

Certain warning lamps may come on in

one of two modes: fixed (continuous) or

flashing.

Only by relating the type of illumination

to the operation of the vehicle can it

be determined whether the situation is

normal or a fault has occurred. In the

event of a fault, the illumination of the

warning lamp may be accompanied by

a message.

The switching on of certain warning lamps may

be accompanied by an audible signal and a

message.

The warning lamps may come on continuously

(fixed) or flash.

When the ignition is switched on

Certain warning lamps come on for a few

seconds in the instrument panel when the

vehicle's ignition is switched on.

When the engine is started, these same

warning lamps should go off.

Refer to the tables on the following

pages for more information.

If they remain on, before moving off, refer to the

information on the warning lamp concerned.

The position of the warning lamps in the

type 2 instrument panel depends on the

colour scheme selected.

38

Monitoring

Operation indicator lamps

If one of the following indicator lamps comes on in the instrument panel, this confirms that the corresponding system has come into operation.

1

Warning / indicator lamp State

Cause

Action / Observations

Left-hand direction flashing with buzzer.

The lighting stalk is pushed down.

indicator

Right-hand

flashing with buzzer.

The lighting stalk is pushed up.

direction indicator

Sidelamps

fixed.

The lighting stalk is in the

"Sidelamps" position.

Dipped beam

headlamps

The lighting stalk is in the "Dipped

beam headlamps" position.

Main beam

headlamps

The lighting stalk is pulled towards

you.

Pull the stalk to return to dipped beam headlamps.

39

Monitoring

Warning / indicator lamp State

Cause

Action / Observations

Automatic

headlamp

dipping

fixed.

The lighting control stalk is in the

"AUTO" position, pulled towards

you, and the function is activated

("Driving assistance" menu).

The system is in dipped beam mode

as there is sufficient ambient light

and/or the traffic conditions do not

allow illumination of main beam.

The camera, located in the door mirror, manages the

operation of main beam, depending on the ambient

lighting and driving conditions.

Pulling the lighting stalk again to deactivate.

For more information on this function, refer to the

Visibility section.

fixed.

The lighting control stalk is in the

"AUTO" position, pulled towards

you, and the function is activated

("Driving assistance" menu).

The system is in main beam mode

as the ambient lighting and traffic

conditions allow it.

Front foglamps

Rear foglamps

fixed.

The front foglamps are switched on.

The rear foglamps are switched on.

Turn the ring on the stalk rearwards twice to switch off

the front foglamps.

Turn the ring on the stalk rearwards to switch off the

rear foglamps.

For more information on the lighting controls, refer to the corresponding section.

40

Monitoring

Warning / indicator lamp State

Cause

Action / Observations

1

Diesel engine

pre-heating

fixed.

The "START/STOP" switch has been Wait until the warning lamp goes off before starting.

pressed (ignition on).

Once it goes off, starting is immediate, on condition

that you maintain pressure on the brake pedal for an

electronic or automatic gearbox, or the clutch pedal is

pressed fully down for a manual gearbox.

The period of illumination of the warning lamp is

determined by the ambient conditions (up to about

thirty seconds in extreme conditions).

If the engine does not start, switch the ignition off and

then on, wait until the warning lamp goes off again,

then start the engine.

Electric parking

brake

fixed.

The electric parking brake is applied.

Release the electric parking brake to switch off the

warning lamp: with your foot on the brake pedal, briefly

push the electric parking brake control lever.

Observe the safety recommendations.

For more information on the electric parking brake,

refer to the corresponding section.

Blind spot

sensors

fixed.

The blind spot monitoring function

has been activated.

For more information, refer to the corresponding

section.

Park Assist

The Park Assist function has been

activated.

For more information, refer to the corresponding

section.

41

Monitoring

Warning / indicator lamp State

Cause

Action / Observations

Automatic

wiping

fixed.

The wiper control is pushed

downwards.

Automatic front wiping is activated.

To deactivate automatic wiping, operate the control

stalk downwards or put the stalk into another position.

Passenger

airbag system

fixed.

The control switch, located at the

passenger's end of the dashboard, is

in the

"ON"

position.

The passenger's front airbag is

activated.

Turn the control switch to the

"OFF"

position to

deactivate the front passenger's airbag.

In this case you can install a rearwards-facing child

seat.

In this case, do not install a

rearwards-facing child seat on the

front passenger seat.

Stop & Start

fixed.

When the vehicle stops (red lights,

The warning lamp goes off and the engine restarts

traffic jams, ...) the Stop & Start system automatically in START mode, as soon as you want to

has put the engine into STOP mode.

move off.

flashes for a few

seconds, then goes

off.

STOP mode is temporarily

unavailable.

or

For more information on special cases with STOP

mode and START mode, refer to the "Stop & Start"

section.

START mode is invoked

automatically.

42

Monitoring

Deactivation indicator lamps

If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.

This is may be accompanied by an audible signal and the display of a message.

1

Warning / indicator lamp State

Cause

Action / Observations

Set the control to the "ON" position to activate the

Passenger's

fixed.

The control switch, located at the

right hand end of the dashboard is set passenger's front airbag.

to the OFF position.

The passenger's front airbag is

deactivated.

airbag system

In this case, do not fit a child seat in the rearward-

facing position.

Dynamic

The button, located on the centre

Press the button to activate the DSC/ASR. Its indicator

stability control

(DSC/ASR)

console, is pressed. Its indicator lamp lamp goes off.

is on.

The DSC/ASR system is activated automatically when

The DSC/ASR is deactivated.

DSC: dynamic stability control.

ASR: anti-slip regulation.

the vehicle is started.

If deactivated, the system is reactivated automatically

from around 30 mph (50 km/h).

Stop & Start

fixed.

The Stop & Start has been

deactivated.

Reactivate the function via the "Driving assistance"

menu.

43

Monitoring

Warning lamps

When the engine is running or the vehicle is being driven, illumination of one of the following warning lamps indicates a fault which requires action on

the part of the driver.

Any fault resulting in the illumination of a warning lamp must be investigated further using the associated message.

If you encounter any problems, contact a CITROËN dealer or a qualified workshop.

Warning / indicator lamp State

STOP fixed, associated with

Cause

Action / Observations

Illumination of this warning lamp is

Stop as soon as it is safe to do so as the engine may

cut out.

another warning lamp, related to a serious fault detected

accompanied by an

audible signal and a

message.

with the braking or power steering

systems, the electrical system, or

with engine lubrication or cooling or

a puncture.

Park, switch off the ignition and call a CITROËN

dealer or a qualified workshop.

44

Monitoring

State

Cause

Action / Observations

1

Service

on temporarily.

A minor fault has occurred for which

there is no specific warning lamp.

Identify the fault by means of the associated message,

such as:

-

opening of a door, the boot or bonnet,

low engine oil level,

low screenwash/headlamp wash fluid level,

discharged remote control battery,

low tyre pressures,

saturation of the particle emission filter (PEF) on

Diesel vehicles.

For more information on the PEF, refer to the

"Checks - particle emissions filter" section.

For any other faults, contact a CITROËN dealer or a

qualified workshop.

fixed.

A major fault has occurred for which

there is no specific warning lamp.

Identify the fault by reading the message and contact

a CITROËN dealer or a qualified workshop.

45

Monitoring

Warning / indicator lamp State

Cause

Action / Observations

Electric parking

brake

flashing.

When driving: the electric parking

brake is not fully released.

Fully release the parking brake by a quick press on the

control lever. If the warning persist, stop as soon as it

is safe to do so.

Contact a CITROËN dealer or a qualified workshop.

When stationary: parking brake

applied, the system does guarantee

immobilisation of the vehicle (when

parking on a very steep slope, for

example).

Secure the immobilisation of the vehicle by engaging

a gear with a manual or electronic gearbox, by placing

the gear selector in position P with an automatic

gearbox, or by fitting a chock to one of the wheels.

Electric parking

brake fault

fixed.

The electric parking brake has a fault. Contact a CITROËN dealer or a qualified workshop

without delay.

The parking brake can be released manually.

For more information on the electric parking brake,

refer to the corresponding section.

Deactivation of

the automatic

functions of the

electric parking

brake

The "automatic application" (on

switching off the engine) and

"automatic release" functions are

deactivated or faulty.

In the event of a fault, illumination of

this warning lamp is accompanied by

a message.

To reactivate the automatic functions, refer to the

"Electric parking brake" section.

Contact a CITROËN dealer or a qualified workshop if

automatic application / release is not possible.

The parking brake can be released manually.

For more information on the electric parking brake,

refer to the corresponding section.

46

Monitoring

Warning / indicator lamp State

Cause

Action / Observations

1

Braking

fixed.

The braking system fluid level has

dropped significantly.

You must stop as soon as it is safe to do so.

Top up with brake fluid listed by CITROËN.

If the problem persists, have the system checked by a

CITROËN dealer or a qualified workshop.

+

fixed, associated

with the ABS warning

lamp.

The electronic brake force distribution You must stop as soon as it is safe to do so.

(EBFD) system has a fault.

Have it checked by a CITROËN dealer or a qualified

workshop.

Anti-lock

Braking System

(ABS)

fixed.

The anti-lock braking system has a

fault.

The vehicle retains conventional braking.

Drive carefully at reduced speed and contact a

CITROËN dealer or a qualified workshop without

delay.

Dynamic

stability control

(DSC/ASR)

flashing.

fixed.

The DSC/ASR regulation is

operating.

The system optimises traction and improves the

directional stability of the vehicle.

Unless it has been deactivated

Have it checked by a CITROËN or a qualified

(button pressed and its indicator lamp workshop.

on) the DSC/ASR system has a fault.

Engine

autodiagnosis

system

flashing.

fixed.

The engine management system has Risk of destruction of the catalytic converter.

a fault.

Have it checked by a CITROËN dealer or a qualified

workshop.

The emission control system has a

fault.

The warning lamp should go off when the engine is started.

If it does not go off, contact a CITROËN dealer or qualified

workshop without delay.

47

Monitoring

Warning / indicator lamp State

Cause

Action / Observations

Low fuel level

fixed, accompanied by When it first comes on there remains

You must refuel as soon as possible to avoid running

an audible signal and

a message.

approximately 6 litres of fuel in the out of fuel.

tank.

Until sufficient fuel is added, this warning lamp will

come on every time the ignition is switched on,

accompanied by an audible signal and a message.

This audible signal and message are repeated with

increasing frequency as the drops towards "0".

Fuel tank capacity: approximately 57 litres (petrol) or

55 litres (Diesel).

You are then using the fuel reserve.

Never continue to drive until you run out of fuel as

this could damage the emission control and injection

systems.

Seat belt(s)

not fastened /

unfastened

fixed

or flashing

accompanied by an

audible signal.

A seat belt has not been fastened or

has been unfastened.

Pull the strap then insert the tongue in the buckle.

Airbags

on temporarily.

This lamp comes on for a few

seconds when you turn on the

ignition, then goes off.

This lamp should go off when the engine is started.

If it does not go off, contact a CITROËN dealer or a

qualified workshop.

fixed.

One of the airbag or seat belt

pretensioner systems has a fault.

Have it checked by a CITROËN dealer or a qualified

workshop.

Passenger

airbag system

flashing.

The passenger airbag system has a

fault.

Do not have a passenger seated in the front

passenger seat

Have it checked by a CITROËN dealer or a qualified

workshop.

48

Monitoring

Warning / indicator lamp State

Cause

Action / Observations

1

Directional

headlamps

flashing.

The directional headlamps system

has a fault.

Have it checked by a CITROËN dealer or a qualified

workshop.

Door(s) open*

fixed, associated with

a message identifying

the door, if the speed is

below 6 mph (10 km/h).

A door or the boot is still open.

Close the door or boot.

fixed, associated with a

message identifying the

door, and accompanied

by an audible signal

if the speed is above

6 mph (10 km/h).

Battery charge

fixed.

The battery charging circuit has a

The warning lamp should go off when the engine is

fault (dirty or loose terminals, slack or started.

cut alternator belt, ...).

If it does not go off, contact a CITROËN dealer or a

qualified workshop.

Maximum

coolant

temperature

fixed red.

The temperature of the cooling

system is too high.

Stop as soon as it is safe to do so.

Wait until the engine has cooled down before topping

up the level, if necessary.

If the problem persists, contact a CITROËN dealer or

qualified workshop.

Engine oil

pressure

fixed.

There is a fault with the engine

lubrication system.

You must stop as soon it is safe to do so.

Park, switch off the ignition and contact a CITROËN

dealer or a qualified workshop.

* Only with the type 1 instrument panel.

49

Monitoring

Warning / indicator lamp State

Cause

Action / Observations

Under-inflation

fixed.

The pressure in one or more wheels

is too low.

Check the pressure of the tyres as soon as possible.

This check should preferably be carried out when the

tyres are cold.

You must reinitialise the system after the adjustment

of one or more tyre pressures and after changing one

or more wheels.

+

flashing then fixed,

accompanied by the

Service warning lamp.

The system has fault: the tyre

pressures are no longer monitored.

Check the tyre pressures as soon as possible.

Have the system checked by a CITROËN dealer or a

qualified workshop.

Foot on the

brake pedal*

fixed.

The brake pedal is not pressed.

With an electronic gearbox, press the brake pedal to

start the engine (lever in position N).

If you wish to release the parking brake without

pressing the brake pedal, this warning lamp will

remain on.

With an automatic gearbox, press the brake pedal to

move the gear selector out of position P

flashing.

fixed.

With an electronic gearbox, if you

hold the vehicle on an incline using

the accelerator for too long, the clutch

overheats.

Use the brake pedal and/or the parking brake.

Foot on the

clutch*

In the STOP mode of Stop & Start,

changing to START mode is refused

because the clutch pedal is not fully

down.

You must declutch fully to allow the change to engine

START mode.

* Only with the type 1 instrument panel

50

Monitoring

1

Service indicator

System which informs the driver when the

next service is due, in accordance with the

manufacturer's servicing schedule.

The point at which the service is due is

calculated from the last indicator zero reset. It

is determined by two parameters:

Between 600 miles (1 000 km)

and 1 800 miles (3 000 km) remain

before the next service is due

For 5 seconds after the ignition is switched on, the

spanner symbolising the service operations comes

on. The distance recorder display line indicates the

distance remaining before the next service is due.

Example: 1 700 miles (2 800 km) remain before

the next service is due.

Less than 600 miles (1 000 km)

remain before the next service is due

Example: 560 miles (900 km) remain before

the next service is due.

For 5 seconds after the ignition is switched on,

the screen indicates:

-

the distance travelled,

the time elapsed since the last service.

For 5 seconds after the ignition is switched on, the

screen indicates:

5 seconds after the ignition is switched on, the

distance recorder resumes its normal operation.

The spanner remains on to indicate that a

service must be carried out soon.

5 seconds after the ignition is switched on,

the spanner goes off; the distance recorder

resumes its normal operation. The screen then

indicates the total and trip distances.

More than 1 800 miles (3 000 km)

remain before the next service is due

When the ignition is switched on, no service

information appears in the screen.

51

Monitoring

Service overdue

Retrieving the service

information

You can access the service information at any

time.

For 5 seconds after the ignition is switched on,

the spanner flashes to indicate that the service

must be carried out as soon as possible.

Example: the service is overdue by 186 miles

(300 km).

ꢀ

Press the trip distance recorder zero reset

button.

For 5 seconds after the ignition is switched on,

the screen indicates:

The service information is displayed for a

few seconds, then disappears.

Service indicator zero reset

After each service, the service indicator must

be reset to zero.

The procedure for resetting to zero is as

follows:

5 seconds after the ignition is switched on,

the distance recorder resumes its normal

operation. The spanner remains on

ꢀ

switch off the ignition,

press and hold the trip distance recorder

zero reset button,

ꢀ

switch on the ignition; the distance recorder

display begins a countdown,

when the display indicates "=0", release

the button; the spanner disappears.

The distance remaining may be

weighted by the time factor, depending

on the driving conditions.

Therefore, the spanner may also come

on if you have exceeded the period

since the last service, indicated in the

servicing and warranty booklet

Following this operation, if you wish to

disconnect the battery, lock the vehicle

and wait at least five minutes for the

zero reset to be taken into account.

52

Monitoring

1

Engine oil level indicator

System which informs the driver whether the

engine oil level is correct or not.

This information is indicated for a few seconds

when the ignition is switched on, after the

service information.

Oil level correct

Oil level indicator fault

This is indicated by a message in the

instrument panel.

This is indicated by a message in the

instrument panel. Contact a CITROËN dealer

or a qualified workshop.

The level read will only be correct if

the vehicle is on level ground and the

engine has been off for more than

30 minutes.

Dipstick

Refer to the "Checks" section to locate the

dipstick and the oil filler cap on your engine.

Oil level incorrect

This is indicated by a message in the

instrument panel.

There are 2 marks on the dipstick:

A = max; never exceed this

level,

If the low oil level is confirmed by a check using

the dipstick, the level must be topped up to

avoid damage to the engine.

B = min; top up the level via

the oil filler, using the grade

of oil suited to your engine.

53

Monitoring

Distance recorders

The total and trip distances are displayed for

thirty seconds when the ignition is switched off,

when the driver's door is opened and when the

vehicle is locked or unlocked.

To conform to legislation in the country

you are crossing, change the units

of distance (miles or km) via the

configuration menu.

Total distance recorder

Trip distance recorder

System which measures the total distance

travelled by the vehicle since its first

registration.

System which measures a distance travelled

during a day or other period since it was reset

to zero by the driver.

ꢀ

With the ignition on, press the button until

zeros appear.

54

Monitoring

1

Allows the manual adjustment of the brightness of the instrument panel and touch screen tablet to

suit the ambient light level.

Operates only when the vehicle lighting is on, with the exception of the daytime running lamps.

Two buttons

Touch screen tablet

With the headlamps on, press button B to

increase the brightness of the instruments

and controls and the interior mood lighting or

button A to reduce it.

ꢀ

Press on the "Configuration" menu.

Adjust the brightness by pressing on

the "

+

" or "

-

" buttons.

As soon as the lighting reaches the required

level of brightness, release the button.

55

Monitoring

Black screen (black panel)

Black screen (touch screen tablet)

instrument panel to be switched off for night

driving.

The instrument panel remains on with the

vehicle speed, the gear selected in an

electronic or automatic gearbox, cruise control

or speed limiter information, if in use, and the

low fuel alerts as appropriate.

If there is an alert or a change in a function

or to a setting, the black panel mode is

interrupted.

Using the steering mounted control:

ꢀ

Press on the "Configuration" menu.

Press the "Turn off screen" button. The

screen in the touch screen tablet goes off.

Press the screen again (anywhere on its

surface) to switch it on again.

ꢀ

With the vehicle lighting on, press this

button again to activate the black panel.

Press this button again to deactivate it.

ꢀ

56

Monitoring

1

Setting the date and time

ꢀ

Select the "Configuration" menu.

Select "Adjust time" or "Adjust date" and

modify the settings using the number pad,

then confirm.

ꢀ

Press "Confirm" to quit.

ꢀ

From the secondary page, select

"Time/Date".

57

Monitoring

Trip computer

Type 1 instrument panel

System that gives you information on the journey in progress (range, fuel consumption…).

The information is accessible in the "Driving assistance" menu.

Information display in the touch screen tablet

Trip reset

-

The current fuel consumption tab

with:

● the range,

● the current fuel consumption,

● the Stop & Start time counter.

-

The trip "1" tab with:

● the distance travelled.

● the average fuel consumption,

● the average speed,

for the first trip.

Permanent display:

Select the "Driving assistance" menu.

The trip computer information is displayed in

the primary page of the menu.

ꢀ

When the desired trip is displayed, press

the reset button or on the end of the wiper

control stalk.

ꢀ

Trips "1" and "2" are independent but their use

is identical.

For example, trip "1" can be used for daily

figures, and trip "2" for monthly figures.

The trip "2" tab with:

ꢀ

Press one of the buttons to display the

desired tab.

● the distance travelled.

● the average fuel consumption,

● the average speed,

for the second trip.

Temporary display in a new window:

ꢀ

Press the end of the wiper control stalk for

access to the information and display the

different tabs.

58

Monitoring

1

Trip computer

Type 2 instrument panel

Information display in the instrument panel

Trip reset

The display of trip computer information is

permanent when you select the "DIALS"

display mode.

-

The current information tab with:

● the range,

● the current fuel consumption,

● the Stop & Start time counter.

ꢀ

When the trip required is displayed, press

the control for more than two seconds

or use the left hand thumb wheel of the

steering mounted controls.

For all other display modes, pressing the end

of the wiper stalk displays this information in a

new window.

Trips "1" and "2" are independent but their use

is identical.

For example, trip "1" can be used for daily

figures, and trip "2" for monthly figures.

Trip "1" with:

● the average speed.

● the average fuel consumption,

● the distance travelled,

for the first trip.

ꢀ

Press the button on the end of the wiper

control stalk to display the various tabs in

succession.

-

Trip "2" with:

● the average speed,

● the average fuel consumption,

● the distance travelled,

for the second trip.

59

Monitoring

Trip computer, a few definitions

Range

Current fuel consumption

Distance travelled

(miles or km)

(mpg or l/100 km or km/l)

(miles or km)

The distance which can still be

travelled with the fuel remaining

in the tank (related to the average

fuel consumption over the last

few miles (kilometres) travelled).

Calculated over the last few seconds.

Calculated since the last trip

computer reset.

This function is only displayed from

20 mph (30 km/h).

This value may vary following a change

in the style of driving or the relief,

resulting in a significant change in the

current fuel consumption.

Average fuel consumption

Stop & Start time

counter

(minutes / seconds or hours /

minutes)

(mpg or l/100 km or km/l)

Calculated since the last trip

computer reset.

If your vehicle is fitted with Stop & Start, a time

counter calculates the time spent in STOP

mode during a journey.

It resets to zero every time the ignition is

switched on with the START/STOP button.

When the range falls below 20 miles (30 km),

dashes are displayed. After filling with at least

5 litres of fuel, the range is recalculated and is

displayed when it exceeds 60 miles (100 km).

Average speed

(mph or km/h)

Calculated since the last trip

computer reset.

If dashes are displayed continuously

while driving in place of the digits,

contact a CITROËN dealer or a

qualified workshop.

60

Monitoring for Your Citroen C4 Grand Picasso SUV Second Generation (2013-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals