Monitoring
Service overdue
Retrieving the service
information
You can access the service information at any
time.
For 5 seconds after the ignition is switched on,
the spanner flashes to indicate that the service
must be carried out as soon as possible.
Example: the service is overdue by 186 miles
(300 km).
Press the trip distance recorder zero reset
button.
For 5 seconds after the ignition is switched on,
the screen indicates:
The service information is displayed for a
few seconds, then disappears.
Service indicator zero reset
After each service, the service indicator must
be reset to zero.
The procedure for resetting to zero is as
follows:
5 seconds after the ignition is switched on,
the distance recorder resumes its normal
operation. The spanner remains on
switch off the ignition,
press and hold the trip distance recorder
zero reset button,
switch on the ignition; the distance recorder
display begins a countdown,
when the display indicates "=0", release
the button; the spanner disappears.
The distance remaining may be
weighted by the time factor, depending
on the driving conditions.
Therefore, the spanner may also come
on if you have exceeded the period
since the last service, indicated in the
servicing and warranty booklet
Following this operation, if you wish to
disconnect the battery, lock the vehicle
and wait at least five minutes for the
zero reset to be taken into account.
52
English 