Safety -> "ISOFIX" mountings for Your Citroen C4 Grand Picasso SUV Second Generation (2013-2022)

Safety  
"ISOFIX" mountings  
latest ISOFIX regulations.  
The seats, represented below, are fitted with regulation ISOFIX mountings:  
To secure the child seat to the TOP TETHER:  
-
remove and stow the head restraint before  
installing the child seat on this seat (refit it  
after the child seat has been removed),  
remove the TOP TETHER cover by pulling  
at its cut-out,  
pass the child seat strap behind the seat  
backrest, centred between the holes for the  
head restraint rods,  
-
-
-
-
secure the upper strap fixing to the ring B,  
tighten the upper strap.  
The ISOFIX mountings are three rings for each seat:  
-
a ring B, located under a cover on the back  
of the top of the seat backrest, referred to as  
the TOP TETHER for fixing the upper strap.  
Its position is indicated by a marking.  
The incorrect installation of a child seat  
in a vehicle compromises the child's  
protection in the event of an accident.  
Observe strictly the fitting instructions  
provided with the child seat.  
Located on the back of the seat backrest, the  
top tether is used to secure the upper strap of  
child seats that have one. This device limits  
forward tipping of the child seat, in the event of  
a front impact.  
This ISOFIX mounting system ensures fast,  
reliable and safe fitting of the child seat in your  
vehicle.  
-
two rings A, located between the vehicle  
seat back and cushion, indicated by a  
marking,  
The ISOFIX child seats are fitted with two  
latches which are secured easily on the two  
rings A.  
Some also have an upper strap (or top tether)  
which is attached to ring B.  
For information on the possibilities  
for fitting ISOFIX child seats to your  
vehicle, refer to the table of seating  
positions.  
252  
 
Safety  
ISOFIX child seats recommended by CITROËN and approved for  
your vehicle  
"RÖMER Baby-Safe Plus and its Baby-Safe Plus ISOFIX base" (size category: E)  
Group 0+: from birth to 13 kg  
Installed "rearward facing" using an ISOFIX base which is attached to the rings A  
The base has a stay, adjustable for height, which sits on the vehicle's floor.  
This seat can be secured with a seat belt. In this case, only the shell is used and attached to the  
vehicle's seat by the three-point seat belt.  
6
Baby P2C Midi and its ISOFIX base (size categories: D, C, A, B, B1)  
Group 1: from 9 to 18 kg  
Installed "rearward facing" using an ISOFIX base which is attached to the rings A  
The base has a stay, adjustable for height, which sits on the vehicle's floor.  
This child seat can also be used "forward facing".  
This seat can not be secured with a seat belt.  
We recommend that you use the seat in the "rearward facing" position up to the age of 3 years.  
253  
 
Safety  
Locations for installing ISOFIX  
child seats  
In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX  
mountings.  
In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G, is indicated on the child  
seat next to the ISOFIX logo.  
Weight of the child / indicative age  
Less than 10 kg  
Less than 10 kg  
(group 0)  
Less than 13 kg  
(group 0+)  
(group 0)  
Up to approx.  
6 months  
From 9 to 18 kg (group 1)  
From approx. 1 to 3 years  
Up to approx. 1 year  
Type of ISOFIX child seat  
ISOFIX size category  
Front passenger seat  
Outer rear seats, fixed  
Sleeper cot*  
"rearwards-facing"  
"rearwards-facing"  
"forwards-facing"  
F
G
C
D
E
C
D
A
B
B1  
Not ISOFIX  
IL-SU**  
IL-SU**  
X
IL-SU  
IL-SU  
IL-SU  
IL-SU  
IL-SU  
IL-SU  
X
IUF / IL-SU  
IUF / IL-SU  
IUF / IL-SU  
IUF / IL-SU  
(1)  
Outer rear seats, adjustable longitudinally  
Centre rear seat  
IUF / IL-SU  
* Sleeper cots cannot be fitted to the front passenger's  
seat.  
** The ISOFIX sleeper cot, secured to the lower rings of an ISOFIX seat,  
occupies the full width of the rear seats.  
254  
 
Safety  
IUF: seat suitable for the installation of an  
ISOFIX Universal seat, "Forwards-facing"  
secured using the top strap to the top  
tether on ISOFIX seats.  
IL-SU: seat suitable for the installation of an  
Isofix Semi-Universal seat either:  
For advice on securing of the top belt, refer to  
the "Isofix Mountings" section.  
X: seat not suitable for the installation of a  
child seat or sleeper cot for the weight group  
indicated.  
(1): The outer seat in row 2 must be adjusted  
to 3 notches back from the fully forward  
position.  
Remove and stow the head restraint  
before installing a child seat on a  
passenger seat. Refit the head restraint  
once the child seat has been removed.  
-
"rearwards-facing" fitted with a top belt  
or a stay,  
-
-
"forwards-facing" fitted with a stay,  
a sleeper cot fitted with an upper strap  
or a stay.  
6
255  
 
Safety  
Locations for installing ISOFIX  
child seats  
mountings.  
In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G, is indicated on the child  
seat next to the ISOFIX logo.  
Weight of the child / indicative age  
Less than 10 kg  
Less than 10 kg  
(group 0)  
Less than 13 kg  
(group 0+)  
(group 0)  
Up to approx.  
6 months  
From 9 to 18 kg (group 1)  
From approx. 1 to 3 years  
Up to approx. 1 year  
Type of ISOFIX child seat  
ISOFIX size category  
Sleeper cot*  
"rearwards-facing"  
"rearwards-facing"  
"forwards-facing"  
F
G
C
D
E
C
D
A
B
B1  
Front passenger seat  
Not ISOFIX  
Outer rear seats, fixed  
IL-SU**  
IL-SU**  
X
IL-SU  
IL-SU  
IL-SU  
IL-SU  
IL-SU  
IL-SU  
IUF / IL-SU  
IUF / IL-SU  
IUF / IL-SU  
IUF / IL-SU  
IUF / IL-SU  
IUF / IL-SU  
Outer rear seats, adjustable longitudinally  
Centre rear seat  
Rear seat in the 3rd row  
Not ISOFIX  
* Sleeper cots cannot be fitted to the front passenger's  
seat.  
** The ISOFIX sleeper cot, secured to the lower rings of an ISOFIX seat,  
occupies the full width of the rear seats.  
256  
 
Safety  
IUF: seat suitable for the installation of an  
ISOFIX Universal seat, "Forwards-facing"  
secured using the top strap to the top  
tether on ISOFIX seats.  
IL-SU: seat suitable for the installation of an  
Isofix Semi-Universal seat either:  
For advice on securing of the top belt, refer to  
the "Isofix Mountings" section.  
X: seat not suitable for the installation of a  
child seat or sleeper cot for the weight group  
indicated.  
(1): The outer seat in row 2 must be adjusted  
to 3 notches back from the fully forward  
position.  
Remove and stow the head restraint  
before installing a child seat on a  
passenger seat. Refit the head restraint  
once the child seat has been removed.  
-
"rearwards-facing" fitted with a top belt  
or a stay,  
-
-
"forwards-facing" fitted with a stay,  
a sleeper cot fitted with an upper strap  
or a stay.  
6
257  
 
Safety  
Advice on child seats  
The incorrect installation of a child seat in a  
vehicle compromises the child's protection in  
the event of an accident.  
Remember to fasten the seat belts or the  
child seat harnesses keeping the slack in  
relation to the child's body to a minimum,  
even for short journeys.  
For optimum installation of the "forward  
facing" child seat, ensure that the back of  
the child seat is as close as possible to the  
backrest of the vehicle's seat, or in contact  
if possible  
As a safety precaution, do not leave:  
Children at the front  
-
one or more children alone and  
unsupervised in a vehicle,  
a child or an animal in a vehicle which  
is exposed to the sun, with the windows  
closed,  
The legislation on carrying a child on the  
front passenger seat is specific to each  
country. Refer to the legislation in force in  
your country.  
Deactivate the passenger's airbag when a  
"rearward facing" child seat is installed on  
the front seat. Otherwise, the child would risk  
being seriously injured or killed if the airbag  
were deployed.  
-
-
the keys within reach of children inside  
the vehicle.  
To prevent accidental opening of the doors,  
use the "Child lock".  
Take care not to open the rear windows by  
more than one third.  
The head restraint must be removed before  
installing a child seat with a backrest on the  
passenger seat.  
Ensure that the head restraint is stowed or  
attached securely so that it is not thrown  
around the vehicle in the event of sharp  
braking.  
To protect young children from the rays of  
the sun, fit side blinds on the rear windows.  
Installing a booster cushion  
The chest part of the seat belt must be  
positioned on the child's shoulder without  
touching the neck.  
Ensure that the lap part of the seat belt  
passes correctly over the child's thighs.  
CITROËN recommends the use of a booster  
seat which has a back, fitted with a seat belt  
guide at shoulder level.  
Refit the head restraint as soon as the child  
seat is removed.  
258