Advertisement

Advertisement

III - Comfort -> Front seats for Your Citroen C4 Picasso SUV First Generation (2006-2013)

C O M F O R T  
FRONT SEATS  
3. Seat height adjustment  
Raise or lower the the control the  
number of times necessary to obtain  
the position desired.  
4. Backrest angle  
Operate the control and adjust the  
angle of the backrest.  
III  
It is possible to incline the back-  
rest 45° rearwards by tilting it until it  
locks; to unlock it, lift the control.  
5. Armrest  
To adjust the position of the armrest,  
pull it up and then fully down, and  
then raise it to the desired position.  
6. Head restraint  
To raise it, pull it upwards. To lower  
it, press on the control as well as on  
the head restraint.  
The adjustment is correct when the  
top of the head restraint is level with  
the top of the head.  
It can also be adjusted for tilt (de-  
pending on version).  
To remove it, press on the unlocking  
button and pull it upwards.  
To adjust the head restraint for-  
wards/backwards, move the base of  
the head restraint to obtain the posi-  
tion desired.  
MANUAL ADJUSTMENTS  
1. Forwards-backwards  
adjustment  
2. Lumbar support  
Rotate the control until you attain  
the position desired.  
Never drive without the head re-  
straints tted. They must be in  
place and adjusted correctly.  
Raise the control bar, then slide the  
seat to the position desired.  
67  
 
C O M F O R T  
FRONT SEATS  
2. Adjustment of backrest  
angle and lumbar support  
Heated seats control  
ELECTRIC ADJUSTMENTS  
Push the top of control  
forwards or backwards to  
adjust the backrest angle.  
III  
Raise or lower control to  
increase or decrease the  
lumbar support.  
With the engine running, the front  
seats can be heated individually.  
) Use the corresponding adjust-  
ment wheel, placed on the inner  
side of each front seat, to switch  
on and select the level of heating  
required:  
The seats can also be adjusted elec-  
trically for a short period:  
1. Adjustment of the  
seat height and angle,  
forwards-backwards  
-
on opening one of the front  
doors,  
after switching off the ignition.  
Raise or lower the front of  
control to raise or lower the  
front of the seat base (on  
driver’s seat).  
-
0: Off.  
1: Low.  
2: Medium.  
3: High.  
Raise or lower the rear of  
control to raise or lower the  
seat.  
Action control forwards or  
backwards to slide the seat  
forwards/backwards.  
68  
 
C O M F O R T  
Storing a position  
Recalling a stored position  
Ignition on or engine running  
) Press button 1 or 2 to recall the  
Storing driving positions  
System which registers the electrical  
settings of the driver's seat and door  
mirrors. It enables you to store and  
recall two positions using the but-  
tons on the side of the driver's seat.  
Using buttons M/1/2  
) Switch on the ignition.  
) Adjust your seat and the door  
mirrors.  
) Press button M, then press but-  
ton 1 or 2 within four seconds.  
An audible signal indicates that  
the position has been stored.  
Storing a new position cancels the  
previous position.  
corresponding position.  
An audible signal indicates the end  
of the adjustment.  
You can interrupt the current move-  
ment by pressing button M, 1 or 2 or  
by using one of the seat controls.  
III  
A stored position cannot be recalled  
while driving.  
Recalling stored positions is deacti-  
vated 45 seconds after switching off  
the ignition.  
69