C O M F O R T
From the boot (when loading, for
example)
SECOND ROW REAR SEATS
(GRAND C4 PICASSO)
Rigid panel
You can fold the second-row seat(s)
from the boot, having first folded the
third-row seats.
) Pull on the strap D to unlock the
chosen seat, push the backrest
gently forwards.
Each seat can be folded onto the
floor to form a flat surface, thus en-
abling you to adapt your vehicle’s
interior space.
III
To prevent any damage to the
mechanism, the strap D unclips
under excessive force. Simply
clip it back in place to render the
system operational.
Each second-row seat backrest has
a rigid panel attached.
This panel enables you:
-
to have a continuous load sur-
face in the boot, whatever the
positions of the seats,
Repositioning a seat
-
to avoid having objects sliding
under the second-row seats.
) Return the second-row seat rigid
panels to their initial position and
lock them in position.
)
Raise the backrest and push it
rearwards until it locks in position.
Folding a seat
From the outside
Unlocking/Locking the rigid
panel
) Slide the latch 1 on the panel
) Pull firmly upwards on strap C,
as indicated by the red arrow, to
unlock the seat; keep pulling until
the seat is fully folded.
downwards, to unlock.
) Return the panel to the upright
position, then slide the latch 1
upwards, to lock.
Before positioning the rigid panels,
check that the second-row seats are
in the fully back position.
Before moving the third-row seats,
return the second-row rigid pan-
els to their initial position and lock
them in place.
Never allow children to operate the
seats without supervision.
Push the seat backrest gently
forwards so that the backrest
folds onto the seat cushion. The
assembly lowers onto the floor.
5-seater configurations do not have
these rigid panels.
72
English 