Advertisement

Advertisement

IV - Access -> Alarm for Your Citroen C4 Picasso SUV First Generation (2006-2013)

A C C E S S  
If an opening (door, boot...) is not  
closed fully, the vehicle is not locked  
but the exterior perimeter monitor-  
ing will be activated after a delay of  
45 seconds at the same time as the  
interior volumetric monitoring.  
ALARM  
Locking the vehicle with full  
alarm system  
System which protects and provides  
a deterrent against theft and break-  
ins. It provides the following types of  
monitoring.  
- Exterior perimeter  
The system checks for opening of  
the vehicle.  
IV  
The alarm is triggered if anyone tries  
to open a door, the boot, the bonnet...  
Deactivation  
) Press the unlocking button on  
the remote control.  
The alarm system is deactivated: the  
indicator lamp in the button goes off.  
- Interior volumetric  
Activation  
) Switch off the ignition and get out  
of the vehicle.  
) Press the locking button on the  
remote control.  
The system checks for any variation  
in the volume in the passenger com-  
partment.  
The alarm is triggered if anyone  
breaks a window, enters the pas-  
senger compartment or moves in-  
side the vehicle.  
The monitoring system is active: the  
indicator lamp in the button ashes  
once per second.  
After the locking button on the re-  
mote control is pressed, the exterior  
perimeter monitoring is activated  
after a delay of 5 seconds and the  
interior volumetric monitoring after a  
delay of 45 seconds.  
Self-protection function  
The system checks for the putting  
out of service of its components.  
The alarm is triggered if the battery,  
the central control or the wires of the  
siren are put out of service or dam-  
aged.  
For all work on the alarm system,  
contact a CITROËN dealer or a  
qualied workshop.  
84  
 
A C C E S S  
Reactivation of the interior  
volumetric monitoring  
) Press the unlocking button on the  
remote control to deactivate the  
exterior perimeter monitoring.  
) Press the locking button on the  
remote control to activate all the  
monitoring functions.  
The indicator lamp in the button  
again ashes once per second.  
Locking the vehicle with  
exterior perimeter monitoring  
only  
Failure of the remote control  
To deactivate the monitoring func-  
tions:  
) Unlock the vehicle using the key  
in the driver's door lock.  
) Open the door; the alarm is trig-  
gered.  
) Switch on the ignition; the alarm  
stops. The indicator lamp in the  
button goes off.  
Deactivate the interior volumetric  
monitoring to avoid unwanted trig-  
gering of the alarm in certain cases  
such as:  
-
-
-
leaving a pet in the vehicle,  
leaving a window partially open,  
washing your vehicle,  
IV  
Locking the vehicle without  
activating the alarm  
Deactivation of the interior  
volumetric monitoring  
) Switch off the ignition.  
) Within ten seconds, press the  
button until the indicator lamp is  
on continuously.  
) Get out of the vehicle.  
) Press the locking button on the  
remote control immediately.  
The exterior perimeter monitoring  
alone is activated: the indicator lamp in  
the button ashes once per second.  
Triggering of the alarm  
) Lock or deadlock the vehicle us-  
ing the key in the driver's door  
lock.  
This is indicated by sounding of the  
siren and ashing of the direction in-  
dicators for thirty seconds.  
Malfunction  
When the ignition is switched on, xed il-  
lumination of the indicator lamp in the but-  
ton indicates a malfunction of the system.  
Have it checked by a CITROËN dealer or  
a qualied workshop.  
The monitoring functions remain  
active until the alarm has been trig-  
gered eleven times in succession.  
When the vehicle is unlocked using  
the remote control, rapid ashing  
of the indicator lamp in the button  
informs you that the alarm was trig-  
gered during your absence. When  
the ignition is switched on, this  
ashing stops immediately.  
Automatic activation*  
2 minutes after the last door or the  
boot is closed, the system is activat-  
ed automatically.  
) To avoid triggering the alarm on  
entering the vehicle, rst press  
the unlocking button on the re-  
mote control.  
To be effective, this deactivation  
must be carried out each time the  
ignition is switched off.  
* According to country.  
85