Advertisement

Advertisement

VIII - Safety -> Seat belts for Your Citroen C4 Picasso SUV First Generation (2006-2013)

S A F E T Y  
The pretensioning seat belts are  
active when the ignition is on.  
Height adjustment  
SEAT BELTS  
The force limiter reduces the pres-  
sure of the seat belt against the  
chest of the occupant, so increasing  
his protection.  
Fastening  
) Pull the belt down in front of you  
in a steady movement, making  
sure that it does not become  
twisted.  
)
Press the fastening into its buckle.  
) Check that it is properly secured  
and that the automatic locking  
mechanism operates correctly  
by pulling sharply on the belt  
strap.  
) The lap strap should be posi-  
tioned as low down as possible in  
the lap and as tight as possible.  
When correctly adjusted, the seat  
belt shoulder strap falls over the  
middle of the shoulder.  
) To adjust the belt, squeeze the  
control and slide it in the direc-  
tion required.  
VIII  
) The diagonal strap should be  
positioned across the chest and  
away from the neck.  
Each belt has a reel that adjusts its  
length automatically to the girth of  
the seat occupant.  
Unfastening  
Front seat belts  
) To unfasten the belt, press on  
the red button in the buckle.  
The belt retracts automatically when  
not in use.  
The front seat belts are tted with a  
pretensioning system and force limiter.  
This system improves safety in the front  
seats in the event of a front impact.  
Depending on the seriousness of the  
impact, the pretensioning system in-  
stantly tightens the seat belt against  
the body of the occupant.  
131  
 
S A F E T Y  
Centre rear seat belt  
Using the seat belt  
(C4 Picasso)  
Fastening the seat belt  
(C4 Picasso and Grand  
C4 Picasso)  
Unfastening the seat belt  
(C4 Picasso and Grand C4 Picasso)  
) Open the cover A.  
) Remove the belt tongues from  
their housing.  
) Pull the strap and insert the  
tongue C into the right hand  
buckle, then insert the tongue D  
into the left hand buckle.  
) Check that each buckle has en-  
gaged by pulling on the strap.  
) Release the right hand buckle C,  
then the left hand buckle.  
) Guide the seat belt back to its  
stowed position.  
VIII  
) Bring the belt tongues up to the  
relay ring B.  
) Insert the attachment, then pass  
the tongues through the ring.  
Stowing the belt tongues  
(C4 Picasso)  
) Close the cover A. Make sure  
that the belt is correctly posi-  
tioned in the recess in the cover  
provided for this purpose.  
) Carry out the seat belt fastening  
operation(C4Picasso)inreverse  
order to stow the belt tongues.  
You may opt to leave the seat belt in  
the relay ring even if not using it.  
Before use  
For safety reasons, it is essential  
that the seat belt passes through  
the relay ring.  
To avoid damaging or jamming the  
seat belts, stow them carefully on  
the sides of the seat backrests.  
132  
 
S A F E T Y  
Third row rear seat belts  
(Grand C4 Picasso)  
Before use:  
To avoid damaging or jamming the  
seat belts, stow them carefully on  
the sides of the seat backrests.  
Instructions for use of  
the third row passenger seat belts  
Stowing the tongue of  
the third-row seat belt  
Take care to attach the third-row  
passenger seat belts securely to the  
rings provided for this purpose.  
Do not attach the belts to the lug-  
gage anchoring rings marked  
with a red cross, as shown in the  
illustration.  
) Secure the tongue in the location  
provided on the rear pillar trim.  
The third-row passenger seat belts  
that are not being used can be  
stowed in order to free up loadspace  
and facilitate use of the luggage  
cover.  
VIII  
133  
 
S A F E T Y  
The driver must ensure that passen-  
gers use the seat belts correctly and  
that they are all restrained securely  
before setting off.  
Wherever you are seated in the ve-  
hicle, always fasten your seat belt,  
even for short journeys.  
Do not interchange the seat belt  
buckles as they will not full their  
role fully.  
The seat belts are tted with an in-  
ertia reel permitting automatic ad-  
justment of the length of the strap  
to your size. The seat belt is stowed  
automatically when not in use.  
In order to be effective, a seat belt  
must:  
Recommendations for children  
Use a suitable child seat if the pas-  
senger is less than 12 years old or  
shorter than one and a half metres.  
Never use the same seat belt to se-  
cure more than one person.  
-
be tightened as close to the body  
as possible,  
-
be pulled in front of you with a  
smooth movement, checking  
that it does not twist,  
Never allow a child to travel on your  
lap.  
-
-
-
be used to restrain only one person,  
not bear any trace of cuts or fraying,  
not be converted or modied to  
avoid affecting its performance.  
In the event of an impact  
Depending on the nature and se-  
riousness of the impact, the pre-  
tensioning device may be deployed  
before and independently of the  
airbags. Deployment of the preten-  
sioners is accompanied by a slight  
discharge of harmless smoke and  
a noise, due to the activation of the  
pyrotechnic cartridge incorporated  
in the system.  
In all cases, the airbag warning lamp  
comes on.  
Following an impact, have the seat  
belts system checked, and if neces-  
sary replaced, by a CITROËN dealer  
or a qualied workshop.  
Before and after use, ensure that the  
seat belt is reeled in correctly.  
The lower part of the strap must be  
positioned as low as possible on the  
pelvis.  
In accordance with current safety  
regulations, for all repairs on your  
vehicle, go to a qualied workshop  
with the skills and equipment need-  
ed, which a CITROËN dealer is able  
to provide.  
Have your seat belts checked reg-  
ularly by a CITROËN dealer or a  
qualied workshop, particularly if the  
straps show signs of damage.  
Clean the seat belt straps with soapy  
water or a textile cleaning product,  
sold by CITROËN dealers.  
After folding or moving a seat or rear  
bench seat, ensure that the seat belt  
is positioned and reeled in correctly.  
The upper part must be positioned  
in the hollow of the shoulder.  
VIII  
The inertia reels are tted with an  
automatic locking device which  
comes into operation in the event  
of a collision, emergency braking or  
if the vehicle rolls over. You can re-  
lease the device by pulling rmly on  
the strap and releasing it so that it  
reels in slightly.  
134