Get Audio and Telematics -> 7-inch touch screen tablet (System 1) Guide for Citroen C4 SUV Second Generation (2010-2018)

Audio and Telematics

7-inch touch screen tablet

GPS satellite navigation - Multimedia audio - Bluetooth^®telephone

Contents

First steps

284

Steering mounted controls

286

287

288

296

300

302

308

310

312

316

324

325

328

332

336

344

Menus

Navigation

Navigation - Guidance

Trafﬁc

Radio Media

Radio

DAB (Digital Audio Broadcasting) radio

Media

Settings

Connected services

Internet browser

MirrorLink^TM

CarPlay^®

Telephone

Frequently asked questions

As a safety measure, the driver should only carry out operations

which require prolonged attention while the vehicle is stationary.

The display of the energy economy mode message signals

that the system is about to go into standby. Refer to the energy

economy mode section.

The system is protected in such a way that it will only operate in

your vehicle.

.

283

Audio and Telematics

First steps

Use the buttons below the touch screen tablet

for access to the menus, then press the virtual

buttons in the touch screen tablet.

Each menu is displayed in one or two pages

(primary page and secondary page).

In very hot conditions, the system may

go into stand-by (screen and sound

completely off) for a minimum period of

5 minutes.

Secondary page

Primary page

284

Audio and Telematics

Short-cuts: using the virtual buttons in the

upper band of the touch screen tablet, it is

possible to go directly to the selection of audio

source, the list of stations (or titles, depending

on the source).

The screen is of the "resistive" type, it

is necessary to press firmly, particularly

for "flick" gestures (scrolling through a

list, moving the map...). A simple wipe

will not be enough. Pressing with more

than one finger is not recognised.

The screen can be used when wearing

gloves. This technology allows use at

all temperatures.

With the engine running, press to

mute the sound.

With the ignition off, press to switch

the system on.

To clean the screen, use a soft

non-abrasive cloth (spectacles cloth)

without any additional product.

Do not use pointed objects on the

screen.

Select the audio source (depending on

version):

Volume adjustment (each source

is independent, including traffic

announcements (TA) and navigation

instructions).

-

FM / DAB / AM* stations.

USB memory stick.

CD player (located in front panel).

Smartphone via MirrorLink^TMor CarPlay^®.

Telephone connected by Bluetooth* and

using Bluetooth* audio streaming.

Media player connected to the auxiliary

socket (jack, cable not supplied).

Jukebox*, after first copying audio files to

the internal memory of the system.

Do not touch the screen with wet

hands.

-

In very hot conditions, the volume may

be limited to protect the system. The

return to normal takes place when

the temperature in the passenger

compartment drops.

.

* Depending on equipment.

285

Audio and Telematics

Steering mounted controls

Media: change the multimedia

source.

Telephone: start a call.

Call in progress: access to the

telephone menu (End call, Secret

mode, Hands-free mode).

Telephone, press and hold: reject an

incoming call, end a call in progress;

other than a call in progress, access

to the telephone menu.

Radio: display the list of stations.

Media: display the list of tracks.

Radio, press and hold: update the list

of stations received.

Increase volume.

Decrease volume.

Radio, turn: automatic search for the

previous / next station.

Media, turn: previous / next track.

Press: confirm a selection.

286

Audio and Telematics

Menus

Navigation

Settings

Radio Media

(Depending on equipment)

Select an audio source, a radio station, display

photographs.

Adjust the settings for sound (balance,

ambience, ...), colour schemes and the display

(language, units, date, time, ...).

Enter navigation settings and choose a

destination.

Connected services

Telephone

Driving

(Depending on equipment)

Connect a telephone by Bluetooth^®.

Access to the CarPlay^®function after

connection of your smartphone by USB cable.

Access to the trip computer.

Activate, deactivate or enter settings for certain

vehicle functions.

Connect using the "Internet browser".

Operate certain applications on your

smartphone via MirrorLink^TMor CarPlay^®.

.

287

Audio and Telematics

Navigation

Level 1

Level 2

Level 3

Navigation

Route settings

288

Audio and Telematics

Level 1

Level 2

Level 3

Comments

Display recent destinations

Enter destination

Fastest

Shortest

Time/distance

Ecological

Tolls

Choose the navigation criteria.

The map displays the route chosen according to

these criteria.

Calculatory criteria

Ferries

Navigation

Traffic

Settings

Navigation

Strict-Close

Show route on map

Confirm

Display the map and start navigation.

Save the options.

Save current location

Stop navigation

Save the current address.

Delete the navigation information.

Choose the volume for voice and announcement

of street names.

Voice synthesis

Diversion

Detour from your initial route by a determined

distance.

Display in text mode

Zoom in.

Zoom out.

Navigation

Display in full screen mode.

Use the arrows to move the map.

Switch to 2D map.

.

289

Audio and Telematics

Level 1

Level 2

Level 3

Address

Enter destination

For managing contacts and

their addresses, refer to the

"Telephone" section.

Navigation

Contacts

To use the telephone functions,

refer to the "Telephone" section.

290

Audio and Telematics

Level 1

Level 2

Level 3

Comments

Curr. location

Points of Interest

Town centre

Save

Address settings

Address

Save the current address.

Add a waypoint to the route.

Press to calculate the route.

Add waypoint

Navigate to

Addresses

View

Navigation

Secondary page

Enter destination

Contacts

Navigate to

Search for contact

Call

Select a contact then calculate the route.

Display the map and zoom to view the roads.

From map

Itinerary

Create, add or delete a waypoint or view the

itinerary.

Stop

Delete navigation information.

Press to calculate the route.

Navigate to

.

291

Audio and Telematics

Level 1

Level 2

Level 3

Navigation

Search for a point of interest

Point of interest displayed on the map

292

Audio and Telematics

Level 1

Level 2

All POIs

Level 3

Comments

Navigation

Secondary page

Search for POI

List of categories available.

After choosing the category, select the points of

interest.

Garage

Dining/hotels

Personal

Search

Save the settings.

Select all

Delete

Navigation

Secondary page

Show POIs

Choose the display settings for POIs.

Save the options.

Import POIs

Confirm

.

293

Audio and Telematics

Level 1

Level 2

Level 3

Diversion

Traffic messages

Map settings

Navigation

Settings

Moving

between

the two

menus.

Settings

294

Audio and Telematics

Level 1

Level 2

Level 3

Comments

On the route

Around vehicle

Near destination

Navigation

Settings for the choice of messages and the

filter radius.

Secondary page

Traffic messages

Detour over a distance

Recalculate route

Detour

Finish

Save your selections.

Flat view north heading

Flat view vehicle heading

Perspective view

Orientation

Maps

Navigation

Secondary page

Map settings

Choose the display and orientation of the

map.

"Day" map colour

"Night" map colour

Automatic day/night

Aspect

Confirm

Save the settings.

Route settings

Voice

Navigation

Secondary page

Settings

Enter settings and choose the volume for the

voice and announcement of street names.

Alert!

Traffic options

Confirm

Save your selections.

.

295

Audio and Telematics

Navigation - Guidance

Choosing a new destination

Towards a new destination

Press on Navigation to display the

primary page.

Select "Save" to save the address

entered as a contact entry.

To delete navigation information,

press "Settings".

The system allows up to 200 entries.

Press on the secondary page.

Select "Enter destination".

Select "Address".

Press "Stop navigation".

Select "Navigate to".

To resume navigation press

"Settings".

Choose the navigation criteria:

"Fastest" or "Shortest" or "Time/

distance" or "Ecological".

Press "Resume navigation".

Select the "Country:" from the

list offered, then in the same

way the "City:" or its post

code, the "Road:", the "N°:".

Confirm each time.

Choose the restriction criteria:

"Include tollroads", "Include

ferries", "Traffic", "Strict", "Close".

Select "Confirm".

Or

Press "Show route on map" to start

navigation.

296

Audio and Telematics

Towards a recent destination

Towards a contact

Press on Navigation to display the

primary page.

Select a destination from

the contacts in the list

offered.

To be able to use navigation "towards

a contact in the directory", it is first

necessary to enter the address for your

contact.

Press on the secondary page.

Select "Navigate to".

Press on Navigation to display the

primary page.

Select "Enter destination".

Select the criteria then "Confirm" to

start navigation.

Press on the secondary page.

Select "Enter destination".

Select "Contacts".

Select an address from

the list offered.

Select "Navigate to".

Select the criteria then "Confirm" or

press "Show route on map" to start

navigation.

.

297

Audio and Telematics

Towards GPS coordinates

Towards a point on the map

Towards points of interest (POI)

Press on Navigation to display the

primary page.

Press on Navigation to display the

primary page.

Points of Interest (POI) are listed in different

categories.

Press on the secondary page.

Select "Enter destination".

Select "Address".

Press on the secondary page.

Select "Enter destination".

Select "From map".

Press on Navigation to display the

primary page.

Press on the secondary page.

Select "Search for POI".

Enter the "Longitude:"

then the "Latitude:".

Zooming in on the map shows points with

information.

Select "All POIs"

A long press on a point opens its content.

Or

Select "Navigate to".

"Garage",

Select the criteria then "Confirm" or

press "Show route on map" to start

navigation.

Or

"Dining/hotels".

298

Audio and Telematics

An annual mapping update allows

new points of interest to be presented

to you.

You can also update the Risk areas /

Danger areas every month.

The detailed procedure is available on:

http://citroen.navigation.com.

.

299

Audio and Telematics

Trafﬁc

Hazard zone / Danger zone

alert settings

Traffic information

Display of messages

Press on Navigation to display the

primary page.

This series of alerts and displays is

only available if Risk Areas have first

been downloaded and installed on the

system.

Press on the secondary page.

Select "Settings".

Select "Traffic messages".

Choose filter settings for:

Select "Alarm!".

"On the route",

It is then possible to activate Risk Areas alerts

then:

"Around",

-

"Audible warning"

"Alert only when navigating"

"Alert only for overspeed"

"Display speed limits"

Timing: the choice of timing allows the

time before giving a Risk Area alert to be

defined.

"Near destination", filters to fine-

tune the list of messages.

Press again to remove the filter.

Select "Confirm".

300

Audio and Telematics

Setting ﬁlters

Receiving TA messages

Select the message from

the list offered.

Press on Navigation to display the

primary page.

Press on Navigation to display the

primary page.

Press on the secondary page.

Select the magnifying glasses to

have voice information.

Select "Settings".

Select "Voice".

TMC (Traffic Message Channel)

messages on GPS-Navigation contain

traffic information transmitted in real

time.

Select "Info options".

Select:

Activate / Deactivate "Traffic

(TA)".

-

"Warn of new messages",

"Speak messages".

The TA (Traffic Announcement)

function gives priority to TA alert

messages. To operate, this function

needs good reception of a radio station

transmitting this type of message.

When a traffic report is transmitted,

the current audio source is interrupted

automatically to play the TA message.

Normal playback of the audio source

resumes at the end of the transmission

of the message.

Then enter the filter radius.

Select "Confirm".

We recommend a filter radius of:

-

12 miles (20 km) in urban areas,

30 miles (50 km) on motorways.

.

301

Audio and Telematics

Radio Media

Level 1

Level 2

List of FM stations

Preset

302

Audio and Telematics

Level 1

Level 2

Comments

Radio Media

List of FM stations

Press on a radio station to select it.

List

FM Radio

DAB Radio

AM Radio

USB

Radio Media

Source

CD

MirrorLink^TM

CarPlay^®

iPod

Select change of source

Bluetooth

AUX

Jukebox

Radio Media

Preset

Press an empty location to Preset it.

.

303

Audio and Telematics

Level 1

Level 2

Level 3

List of FM stations

Media

Photos

Copy to Jukebox

Manage Jukebox

304

Audio and Telematics

Level 1

Level 2

Preset

Level 3

Comments

Press a radio station to select it.

Update the list of stations received.

Enter the desired radio frequency.

Save the settings.

Radio Media

Update list

Frequency

Confirm

Secondary page

Radio list

Home screen

Rotate

Display the selected photo in the home page.

Rotate the photo 90°.

Select all the photos in the list.

Press again to deselect.

Radio Media

Secondary page

Photos

Select all

Previous photo.

Pause / Play.

Next photo.

Display the photos in sequence, full screen.

The system supports the following image

formats: .gif, .jpg, .bmp, .png.

Slideshow

Full screen

Sort by folder

Sort by album

Select all

Display the selected photo full-screen.

Choose a selection mode.

Radio Media

Secondary page

Manage Jukebox

Copy

Copy files to the Jukebox.

Create folder

Rename

Delete

Choose the desired function.

Save the settings.

Magnifying glass

Select all

Confirm

.

305

Audio and Telematics

Level 1

Level 2

Level 3

Media

Settings

306

Audio and Telematics

Level 1

Level 2

Level 3

Comments

Radio Media

Secondary page

Media list

Presentation of the last media used.

Random (all tracks):

Media

Random (current album):

Choose the play settings.

Settings

Loop:

Aux. amplification

RDS options

Radio Media

Secondary page

Settings

DAB/FM options

Display Radio Text

Radio

Activate or deactivate the settings.

Settings

Digital radio slideshow

display

Traffic announcements (TA)

News - Weather

Announcements

Settings

Activate or deactivate the settings.

Save the settings.

Sport - Programm info

Flash - Unforeseen

events

Confirm

.

307

Audio and Telematics

Radio

Selecting a station

Changing a radio frequency

Press on Radio Media to display the

primary page.

Select "Preset".

Press on Radio Media to display the

primary page.

Select a preset radio station

Select "List" in the primary page.

in the list.

If necessary, select change of

source.

By automatic frequency search

Or

Press on Radio Media to display the

primary page.

Select "FM Radio".

Press 3 or 4 to move the cursor for an

automatic search down or up for a radio

frequency.

Press on the secondary page.

Or

"AM Radio".

Select "Radio list" in the secondary

page.

THEN

Select change source.

Radio reception may be affected by

the use of electrical equipment not

approved by CITROËN, such as a USB

charger connected to the 12 V socket.

The exterior environment (hills,

buildings, tunnel, car park, below

ground...) may prevent reception,

even in RDS station tracking mode.

This phenomenon is normal in the

propagation of radio waves and is in no

way indicative of a fault with the audio

system.

Select a radio station from

the list offered.

Select "FM Radio".

Select "Update list" to refresh the

list.

Or

To select a preset radio station.

"AM Radio".

Press on Radio Media to display the

primary page.

308

Audio and Telematics

Preset a station

Activate/ Deactivate RDS

Press on Radio Media to display the

primary page.

OR

Select a radio station or frequency (refer to the

corresponding section).

Press on Radio Media to display the

primary page.

Press on "Preset".

Press on the secondary page.

Select "Settings".

Select a number in the list to preset the

previously chosen radio station.

A long press on a number presets (memorises)

the station.

Press on Frequency.

Select "Radio".

Activate/deactivate "RDS

options".

Or

THEN

A press on this button presets all of

the stations one after the other.

Enter the frequency in full (e.g.:

92.10 MHz) using the keypad then

"Confirm".

RDS, if activated, allows you to continue

listening to the same station by automatic

retuning to alternative frequencies.

However, in certain conditions, coverage

of an RDS station may not be assured

throughout the entire country as radio

stations do not cover 100 % of the

Recall pre-set stations

Press on Radio Media to display the

primary page.

Changing radio station

Pressing the name of the current radio station

brings up a list.

To change radio station press the name of the

desired station.

Select "Save".

territory. This explains the loss of

reception of the station during a journey.

.

309

Audio and Telematics

DAB (Digital Audio Broadcasting) radio

Short-cut: access to the choice of audio

Display of the name of the

current station.

source and the list of stations (or titles,

depending on the source).

Select the radio station.

Any thumbnail broadcast by

the station.

Select the audio source.

Display the "DAB" band.

Manage the Jukebox.

Display current action.

Display of "Radiotext" for

the current station.

Secondary page.

Next "Multiplex".

Next radio station.

Previous "Multiplex".

Previous radio station.

Preset stations,

buttons 1 to 15.

Short press: select the

preset radio station.

Long press: preset a radio

station.

Display the name and

number of the multiplex

service being used.

Display of options:

if active but not available, the display will be greyed out,

if active and available, the display will be blank.

If the "DAB" radio station being listened to is not

available on "FM", the "DAB FM" option is greyed out.

Journaline^®is a text-based information service designed for digital radio systems.

It provides text-based information structured around topics and sub-topics.

This service is available from the "LIST OF DAB STATIONS" page.

310

Audio and Telematics

Digital radio

DAB / FM auto tracking

Digital radio provides higher quality

"DAB" does not cover 100% of the

territory.

If "DAB / FM auto tracking" is activated,

there is a difference of a few seconds

when the system switches to "FM"

analogue radio with sometimes a

variation in volume.

When the digital signal is restored,

the system automatically changes back

to "DAB".

reception and also the graphical display

of current information on the radio

station being listened to. Select "List" in

the primary page.

The range of multiplexes available is

displayed in alphabetical order.

When the digital radio signal is poor,

"DAB / FM auto tracking" allows you to

continue listening to the same station,

by automatically switching to the

corresponding "FM" analogue station

(if there is one).

Press on Radio Media to display the

primary page.

Press on Radio Media to display the

primary page.

If the "DAB" station being listened to

is not available on "FM" ("DAB/FM"

option greyed out), or "DAB / FM auto

tracking" is not activated, the sound

will cut out while the digital signal is too

weak.

Select change of source.

Select "DAB Radio".

Press on the secondary page.

Select "Settings".

Select "List" in the primary page.

Select "RADIO".

or

Select "Digital/FM auto

tracking" then "Confirm".

Select "Radio list" in the secondary

page.

Select the radio station from the list offered.

.

311

Audio and Telematics

Media

USB player

Auxiliary socket (AUX)

Selecting the source

Press on Radio Media to display the

primary page.

Select change of source.

Insert the USB memory stick into the USB port

or connect the USB device to the USB port

using a suitable cable (not supplied).

Connect the portable device (MP3 player…) to

the auxiliary Jack socket using an audio cable

(not supplied).

The system builds playlists (in temporary

memory), an operation which can take from

a few seconds to several minutes at the first

connection.

Reduce the number of non-music files and the

number of folders to reduce the waiting time.

The playlists are updated every time the

ignition is switched off or connection of a USB

memory stick. The lists are memorised: if they

are not modified, the subsequent loading time

will be shorter.

First adjust the volume of your portable device

(to a high level). Then adjust the volume of your

audio system.

Display and management of the controls are

via the portable device.

Choose the source.

The steering mounted SRC (source)

button can be used to go to the next

media source, available if the source

is active.

CD player

Insert the CD in the player.

Press OK to confirm the selection.

312

Audio and Telematics

Information and advice

The audio equipment will only play audio files

with ".wma, .aac, .flac, .ogg and. mp3" file

extensions and with a bit rate of between

32 Kbps and 320 Kbps.

It also supports VBR (Variable Bit Rate) mode.

No other type of file (.mp4, ...) can be played.

".wma" files must be of the standard wma 9 type.

The sampling rates supported are 32, 44 and

48 KHz.

In order to be able to play a recorded CDR or

CDRW, when recording it is preferable to select

the ISO 9660 level 1, 2 or Joliet standard.

If the disc is recorded in another format it may

not be played correctly.

It is recommended that the same recording

standard is always used for an individual disc,

with as low a speed as possible (4x maximum)

for optimum sound quality.

Use only USB memory sticks formatted FAT32

(file allocation table).

The system does not support the

simultaneous connection of two

identical devices (two memory sticks,

two Apple^®

players) but it is possible

to connect one memory stick and one

Apple^®player at the same time.

In the particular case of a multi-session CD, the

Joliet standard is recommended.

It is advisable to restrict file names to

20 characters, without using of special

characters (e.g.: " " ? ; ù) to avoid any playing

and displaying problems.

It is recommended that the USB cable

for the portable device is used.

The system supports USB mass

storage devices, BlackBerry^®devices

or Apple^®players via USB ports. The

adaptor cable not supplied.

Control of the peripheral device is with

the audio system controls.

Other peripherals, not recognised on

connection, must be connected to the

auxiliary socket using a Jack cable (not

supplied).

.

313

Audio and Telematics

Bluetooth^®audio streaming Connecting Apple^®players

Streaming allows audio files on your telephone

to be played through the vehicle's speakers.

The classifications available are those

of the portable device connected

(artists / albums / genres / playlists /

audiobooks / podcasts).

The default classification used is by

artist. To modify the classification used,

return to the first level of the menu

then select the desired classification

(playlists for example) and confirm

to go down through the menu to the

desired track.

Connect the telephone: see the "Telephone"

section, then "Bluetooth".

Choose the "Audio" or "All" profile.

If play does not start automatically, it may be

necessary to start the audio playback from the

telephone.

Control is from the peripheral device or by

using the audio system buttons.

Control is via the audio system.

Connect the Apple^®player to the USB port

using a suitable cable (not supplied).

Play starts automatically.

The version of software in the audio system

may not be compatible with the generation of

your Apple^®player.

Once connected in streaming mode,

the telephone is considered to be a

media source.

It is recommended that you activate

"Repeat" on the Bluetooth peripheral.

314

Audio and Telematics

Managing the Jukebox

Connect the device (MP3 player...) to the USB

port or auxiliary Jack socket using a suitable

audio cable.

Select the magnifying glass to enter

the folder or album and select audio

file by audio file.

Select "Confirm" then "Copy".

When no audio file is copied to the

system, which has a capacity of 8 GB,

all of the Jukebox function symbols are

greyed and are not available.

Select "New folder" to create a

folder structure in the Jukebox.

Select "Media list".

Or

Select "Keep structure" to retain the

structure from the device.

Select copy "Copy Jukebox".

Select "Sort by folder".

While copying the system returns

to the primary page; you can go

back to the copy view at any time by

selecting this button.

Or

"Sort by album".

.

315

Audio and Telematics

Settings

Level 1

Level 2

Level 3

Audio settings

Choice of color scheme

316

Audio and Telematics

Level 1

Level 2

Ambience

Level 3

Comments

Choose the sound ambience.

Balance

Sound distribution using the Arkamys^®system.

Set the volume or activate the link to vehicle

speed.

Sound effects

Ringtones

Settings

Audio settings

Set the telephone ringtone and volume.

Set the volume and voice for speaking street

names

Voice

Confirm

Save your settings.

Settings

Turn off screen

Settings

Function that turns off the display.

Pressing the screen reactivates it.

Choose the color scheme, then confirm to save

the setting.

Confirm

Color schemes

.

317

Audio and Telematics

Level 1

Level 2

Units

Factory settings

Configuration

Adjust date and time

Display screen

318

Audio and Telematics

Level 1

Level 2

Comments

Set the units used to display distance, fuel

consumption and temperature.

Units

Settings

Select the desired data in the list then press

Delete.

Delete data

Factory settings

Confirm

Secondary page

System settings

Return to factory settings.

Save the settings.

Settings

Secondary page

Time/Date

Confirm

Set the date and time then confirm.

Activate automatic text scrolling

Activate animations

Confirm

Settings

Secondary page

Screen settings

Activate or deactivate the setting then confirm.

.

319

Audio and Telematics

Level 1

Level 2

Choice of language

Configuration

Calculator

Calendar

320

Audio and Telematics

Level 1

Level 2

Comments

Settings

Secondary page

Languages

Confirm

Select the language then confirm.

Settings

Secondary page

Calculator

Select the calculator.

Settings

Secondary page

Calendar

Select the calendar.

.

321

Audio and Telematics

Audio settings

Press Settings to display the primary

page.

On-board audio: Arkamys^©Sound

Staging optimises sound distribution in

the the passenger compartment.

The distribution (or spatialisation using

the Arkamys^®system) of sound is an

audio process that allows the audio

quality to be adapted to the number of

passengers in the vehicle.

Select "Audio settings".

Available only with the 6-speaker

configuration.

Select "Ambience"

"Balance"

Color schemes

Press on Settings to display the

primary page.

The audio settings (Ambience, Bass,

Treble and Loudness) are different

and independent for each sound

source.

Or

Select "Color schemes".

The settings for F-R balance and

L-R balance are common to all

sources.

"Sound effects"

"Ringtones"

Select the color scheme in the list

then "Confirm".

-

"Ambience" (choice of 6 musical

ambiences)

At each change of color scheme the

system restarts, showing a black

screen for a few moments.

-

"Bass"

"Treble"

"Loudness" (Activate/Deactivate)

"Balance" ("Driver", "All

passengers", "Front only")

"Audible response from touch

screen"

Or

"Voice".

As a safety measure, the procedure

for changing the color scheme is only

possible with the vehicle stationary.

-

"Volume linked to vehicle

speed:" (Activate/Deactivate)

322

Audio and Telematics

Modifying system settings

Press on Settings to display the

Press on "Settings" to display the

primary page.

Press on the secondary page.

Press on the secondary page

Select "System Settings".

Select "Screen settings".

Select "Time/Date" to change the

time zone, synchronisation with GPS,

the time and its format, then the date.

Select "Units" to change the units

of distance, fuel consumption and

temperature.

Activate or deactivate "Activate

automatic text scrolling" and

"Activate animations".

Select "Languages" to change

language.

Select "Delete data" to delete the

list of recent destinations, personal

points of interest, contacts in the list.

Select "Calculator" to display a

calculator.

Select "Calendar" to display a

Choose the item then select "Delete".

calendar.

Select "Factory settings" to return

to the original settings.

.

323

Audio and Telematics

Connected services

Level 1

Level 2

Level 3

324

Audio and Telematics

Internet browser

Press on Connected services to

display the primary page.

Press on "Internet browser" to

displays the browser's home page;

first connect your smartphone by

Bluetooth, option "Internet", see the

"Telephone" section.

Authentication for Internet browsing via

a smartphone is done using the Dial-Up

Networking (DUN) standard.

Some smartphones of the latest

generation do not support this

standard.

.

325

Audio and Telematics

Level 1

Level 2

Bluetooth (devices)

Usage monitor

Internet connection settings

Wi-Fi network connection

326

Audio and Telematics

Level 1

Level 2

Comments

Search

Start the search for a device to connect.

Start or end the Bluetooth connection to the

selected device.

Connected services

Secondary page

Connect / Disconnect

Update

Import contacts from the selected telephone to

save them in the audio system.

Bluetooth

connection

Delete

Delete the selected telephone.

Save the settings.

Confirm

Connected services

Secondary page

Transfer rate

Reset

Reset the usage monitor, them confirm.

Confirm

All

Display all Wi-Fi networks.

Secure

Stored

Add

Display secure Wi-Fi networks.

Memorise the selected Wi-Fi network(s).

Add a new Wi-Fi network.

Connected services

Secondary page

WiFi connection

Off/ On

Connect

Activate or deactivate a Wi-Fi network.

Select a Wi-Fi network found by the system and

connect to it.

.

327

Audio and Telematics

MirrorLink^TM

Applications

Car mode

Optional depending on the

smartphone and operating system.

328

Audio and Telematics

MirrorLink^TMsmartphone

connection

During the procedure, several screen

pages relating to certain functions

are displayed.

Accept to start and end the

connection.

Please note:

if your smartphone is supported, to

-

make it "MirrorLink^TM" compatible,

some phone manufacturers

nevertheless invite you to first

download a dedicated application.

As a safety measure and because it

requires sustained attention by the

driver, using a smartphone when

driving is prohibited.

All operations must be done with the

vehicle stationary.

Once connection is established, an

"Applications" page is displayed with the

list of applications already downloaded to

your smartphone and adapted to MirrorLink^TM

technology.

If only one application has been downloaded to

the smartphone, it starts automatically.

When connecting a smartphone to the

system, it is recommended that Bluetooth^®

be started on the smartphone

The synchronisation of a

smartphone allows applications on a

smartphone that are adapted to the

MirrorLink^TMtechnology to be displayed

in the vehicle's screen.

As the principles and standards are

constantly evolving, it is recommended

that you update the operating system of

your smartphone.

If the smartphone is locked,

communication with the system is only

by USB cable.

Connect a USB cable. The

smartphone charges when

connected by a USB cable.

Access to the different audio sources remains

accessible in the margin of the MirrorLink^TM

display, using touch buttons in the upper bar.

Access to the menus for the system is possible

at any time using the dedicated buttons.

From the system, press "Connected

services" to display the primary

page.

For the list of eligible smartphones,

connect to the brand's internet website

in your country.

Press "MirrorLink^TM" to start

the application in the system.

Voice recognition

Press the end of the lighting control stalk to

start voice recognition of your smartphone via

the system.

Voice recognition requires a compatible

smartphone connected to the vehicle by

Bluetooth.

As a safety measure, applications

can only be viewed with the vehicle

stationary; display is interrupted once

the vehicle is moving.

Start the application on the

smartphone (optional, depending

on the smartphone and operating

system).

.

329

Audio and Telematics

Level 1

Level 2

Level 3

Connect-App

Car mode

Controls

Connect-App

Back

Home

Car mode

330

Audio and Telematics

Level 1

Level 2

Level 3

Comments

Access or return to the list of applications already

downloaded to your smartphone and adapted to

MirrorLink^TMtechnology.

Connect-App

Connected

services

"Back": abandon the current operation, go up

one level.

Car mode

Controls

MirrorLink^TM

Connect-App

"Home": access or return to the "Car mode"

page.

Access to the "Connected services" primary

page.

.

331

Audio and Telematics

CarPlay^®

332

Audio and Telematics

CarPlay^®smartphone

connection

Connect a USB cable. The

smartphone charges when

connected by a USB cable.

Voice recognition

As a safety measure and because it

requires sustained attention by the

driver, using a smartphone when

driving is prohibited.

All operations must be done with the

vehicle stationary.

Press the end of the lighting control stalk to

start voice recognition of your smartphone via

the system.

Press "Telephone" to display the

CarPlay^®interface.

Or

The synchronisation of a

smartphone allows applications on a

smartphone that are adapted to the

CarPlay^®technology to be displayed in

the vehicle's screen.

As the principles and standards are

constantly evolving, it is recommended

that you update the operating system of

your smartphone.

Connect the USB cable. The

smartphone is charged while

connected by the USB cable.

From the system, press "Connected

services" to display the primary

page.

Press on "CarPlay" to display the

CarPlay^®interface.

For the list of eligible smartphones,

connect to the brand's internet website

in your country.

During the procedure, one or more

screen pages relating to certain

functions are displayed on connection.

As a safety measure, applications

can only be viewed with the vehicle

stationary; display is interrupted once

the vehicle is moving.

.

333

Audio and Telematics

Level 1

Level 2

Level 3

334

Audio and Telematics

Level 1

Level 2

Level 3

Favourites

Comments

Calls

The "Telephone" function is placed automatically

in "Siri" voice mode.

Press on "Display contacts" for access to the

telephone menus.

Telephone

Contacts

Keypad

Messages

Lists

Artists

Tracks

Albums

Other...

Press on "Music" to browse and select the tracks

on your smartphone.

Press on "Playing" for access to the track

currently playing.

Music

Connected services

Apple^®CarPlay^®

Press on "Destinations" to search for an address

by "Siri" voice command or by using the keypad.

The GPS function is through the telephone's 3G,

4G or Wi-Fi internet connection.

Plan

Destinations

The "Messages" function is place automatically

in "Siri" voice mode to speak the message and

the addressee.

Press on "Display messages" for access to the

messages.

Messages

Playing

Display messages

Access to the track currently playing.

.

335

Audio and Telematics

Telephone

Level 1

Level 2

Call log

Level 3

Contacts

336

Audio and Telematics

Level 1

Level 2

All calls

Level 3

Comments

Incoming calls

Outgoing calls

Contacts

Telephone

Call log

After making choices, start the call.

View

Magnifying glass

Create

Call

Addresses

New

Modify

Delete

View

Telephone

Contacts

Delete all

By name

Confirm

After making choices, start the call.

Navigate to

Search for contact

Call

.

337

Audio and Telematics

Level 1

Level 2

Level 3

Bluetooth (devices)

Devices detected

Telephone connection

Telephone Options

338

Audio and Telematics

Level 1

Level 2

Search

Level 3

Comments

Start the search for another peripheral device to

connect.

Telephone

connection

Start or stop the Bluetooth connection to the

selected peripheral device.

Connect /Disconnect

Update

Secondary page

Import the contacts from the selected telephone

to store them in the audio system.

Bluetooth

connection

Delete

Delete the selected telephone.

Save the settings.

Confirm

Telephone

connection

Telephone

Secondary page

Devices detected

Put on hold

Audio streaming

Start the search for peripheral devices.

Search

for devices

Internet

Cut the microphone temporarily so that the

contact cannot hear your conversation with a

passenger.

Import the contacts from the selected telephone

to save then in the audio system.

Telephone

connection

Update

Ringtones

Choose the telephone ringtone and volume.

Secondary page

Contact records used and free, percentage of

storage space used by internal contacts and

Bluetooth contacts.

Telephone options

Memory info.

Confirm

Save the settings.

.

339

Audio and Telematics

Pairing a Bluetooth^®

telephone

Procedure from the system

For reasons of safety and because they

require prolonged attention on the part

of the driver, the operations for pairing

the Bluetooth mobile telephone to the

hands-free system of the audio system

must be carried out with the vehicle

stationary.

Activate the telephone's Bluetooth function

and ensure that it is "visible to all" (telephone

configuration).

Select the name of the

desired peripheral from the

list and "Confirm".

Press on Telephone to display the

primary page.

Enter a code of at least 4 figures for

the connection then "Confirm".

Procedure (short) from the

telephone

Press on the secondary page.

Enter this same code in the telephone then

accept the connection.

In the Bluetooth menu of your device, select the

system name in the list of devices detected.

Select "Bluetooth connection".

The system offers to connect the telephone:

-

in "Telephone" (hands-free kit, telephone

only),

Enter a code of at least 4 figures in the device

and confirm.

Select Search.

The list of telephones detected is

displayed.

in "Audio streaming" (streaming: wireless

playing of audio files from the telephone),

in "Internet" (internet browsing, only if your

telephone is compatible with the "DUN"

Dial-Up Networking Bluetooth standard).

Enter this same code in the system,

select "OK" and confirm.

Select one or more profiles and confirm.

If the telephone is not detected, it is

recommended that you switch the Bluetooth

function on your telephone off and then on again.

340

Audio and Telematics

Connecting a Bluetooth^®

peripheral device

Automatic reconnection

On switching on the ignition, the telephone

connected when the ignition was last switched

off is automatically reconnected, if this

connection mode had been activated during the

pairing procedure.

The services available depend on

the network, the SIM card and the

compatibility of the Bluetooth telephone

used. Check the telephone manual and

with your network provider for details of

the services available to you.

Depending on the type of telephone,

the system will ask you to accept or not

the transfer of your contacts.

If not, select "Update".

The connection is confirmed by the display of a

message and the name of the telephone.

Manual connection

On return to the vehicle, if the last telephone

connected is present again, it is reconnected

automatically and within around 30 seconds

after switching on the ignition the pairing is

done without any action on your part, with

(Bluetooth activated).

The ability of the system to connect

with only one profile depends on the

telephone. The three profiles may all

connect by default.

Press on Telephone to display the

primary page.

Press on the secondary page.

Visit www.citroen.co.uk for more information

(compatibility, additional help, ...).

To modify the automatic connection mode,

select the telephone in the list then select the

desired profile.

Select "Bluetooth" to display the list

of paired peripherals.

The recognised telephone

appears in the list.

Select the peripheral to connect.

Press on "Search".

Depending on your telephone, you may be

asked to accept automatic connection every

time the ignition is switched on.

The connection is confirmed by the display of a

message and the name of the telephone.

.

341

Audio and Telematics

Managing paired

telephones

Receiving a call

Making a call

An incoming call is announced by a ring and a

superimposed display in the screen.

Using the telephone is not

recommended while driving.

Park the vehicle.

Make the call using the steering

mounted controls.

This function allows the connection or

disconnection of a peripheral device as

well as the deletion of a pairing.

Make a short press on the steering

mounted TEL button to accept an

incoming call.

Press on Telephone to display the

primary page.

Make a long press

Calling a new number

Press on the secondary page.

Press on Telephone to display the

primary page.

on the steering mounted TEL button

to reject the call.

Select "Bluetooth" to display the list

of paired peripheral devices.

Enter the phone number using the

digital keypad.

Press "Call" to start the call.

Or

Select the peripheral in the list.

Select "End call".

Select "Search for devices"

Calling a contact

Press on Telephone to display the

primary page.

Or

"Connect / Disconnect" to start or

end the Bluetooth connection with

the selected device.

Or make a long press

Or

on the steering mounted TEL button.

"Delete" to delete the pairing.

342

Audio and Telematics

Managing contacts /

entries

Select "Contacts".

Press on Telephone to display the

Select "By name" to view the list of

primary page.

contacts.

Select the desired contact from the list offered.

Select "Contacts".

Select "Call".

Select "View".

Calling a recently used number

Select "Create" to add a new contact.

Press on Telephone to display the

primary page.

Or

"Modify" to edit the selected contact.

Select "Call log".

Select the desired contact from the list offered.

"Delete" to delete the selected

contact.

It is always possible to make a call

directly from the telephone; park the

vehicle first as a safety measure.

"Delete all" to delete all information

for the selected contact.

.

343

Audio and Telematics

Frequently asked questions

The following table groups together the answers to the most frequently asked questions concerning your audio system.

Navigation

QUESTION

ANSWER

SOLUTION

The route calculation is

not successful.

The route settings may conflict with the current location (exclusion

of toll roads on a toll motorway).

Check the route settings in the "Navigation"

menu.

The POIs do not appear.

The POIs have not been selected.

Select the POIs in the list of POIs.

The Hazard zone audible

warning does not work.

The audible warning is not active.

Activate audible warnings in the "Navigation"

menu.

The system does not

The guidance criteria do not take account of TMC messages.

Select the "Traffic info" function in the list of route

suggest a detour around

an incident on the route.

settings.

I receive an Accident-

prone area alert which is

not on my route.

Other than guidance, the system announces all Hazard zones

positioned in a cone located in front of the vehicle. It may provide

an alert for a Hazard zone located on nearby or parallel roads.

Zoom in on the map to view the exact position of the

Accident-prone area. Select "On the route" to no

longer receive alerts other than navigation instructions

or to reduce the time for the announcement.

344

Audio and Telematics

QUESTION

ANSWER

SOLUTION

Certain traffic jams along

the route are not indicated receive the traffic information.

in real time.

On starting, it is several minutes before the system begins to

Wait until the traffic information is being received

correctly (display of the traffic information icons

on the map).

The filters are too restrictive.

Modify the "Geographic filter" settings.

In certain countries, only major routes (motorways...) are listed for

the traffic information.

This phenomenon is normal. The system is

dependent on the traffic information available.

The altitude is not

On starting, the initialisation of the GPS may take up to 3 minutes to Wait until the system has started up completely

displayed.

receive more than 4 satellites correctly.

so that there is GPS coverage by at least

4 satellites.

Depending on the geographical environment (tunnel...) or the

weather, the conditions of reception of the GPS signal may vary.

This phenomenon is normal. The system

is dependent on the GPS signal reception

conditions.

.

345

Audio and Telematics

Radio

QUESTION

ANSWER

SOLUTION

The quality of reception of The vehicle is too far from the transmitter used by the station

Activate the "RDS" function by means of the

short-cut menu to enable the system to check

whether there is a more powerful transmitter in

the geographical area.

the radio station listened

to gradually deteriorates

or the stored stations do

not function (no sound,

87.5 Mhz is displayed...).

listened to or there is no transmitter in the geographical area

through which the vehicle is travelling.

The environment (hills, buildings, tunnels, basement car parks...)

block reception, including in RDS mode.

This phenomenon is normal and does not

indicate a fault with the audio system.

The aerial is absent or has been damaged (for example when going Have the aerial checked by a CITROËN dealer.

through a car wash or into an underground car park).

I cannot find some radio

stations in the list of

stations received.

Press and hold the "List" button at the steering

mounted controls to update the list of stations

received or press on the system update function:

The station is not received or its name has changed in the list.

"Update list".

Some radio stations send other information in place of their name

(the title of the song for example).

The name of the radio

station changes.

The system interprets this information as the name of the station.

346

Audio and Telematics

Media

QUESTION

ANSWER

SOLUTION

Playback of my USB

memory stick starts only

after a very long wait

(around 2 to 3 minutes).

Some files supplied with the memory stick may greatly slow down

access to reading the memory stick (multiplication by 10 of the

catalogue time).

Delete the files supplied with the memory stick

and limit the number of sub-folders in the file

structure on the memory stick.

When I connect my iPhone When the iPhone connects automatically as a telephone, it forces

Disconnect and reconnect to the USB port (the

USB function takes priority over streaming).

as a telephone and to

the USB port at the same

time, I am unable to play

the music files.

the streaming function. The streaming function takes the place

of the USB function which is then not useable, there is a period

without sound of the track being played with Apple^®players.

The CD is ejected

automatically or is not

played by the player.

The CD is inserted upside down, is unplayable, does not contain any

audio data or contains an audio format which the player cannot play.

-

Check that the CD is inserted in the player

the right way up.

Check the condition of the CD: the CD

cannot be played if it is too damaged.

Check the content in the case of a recorded

CD: refer to the advice in the "AUDIO" section.

The audio system's CD player does not play

DVDs.

Some recorded CDs will not be played by

the audio system because they are not of the

correct quality.

The CD has been recorded in a format that is not compatible with the player (udf, ...).

The CD is protected by an anti-pirating protection system which is

not recognised by the audio system.

There is a long waiting

When a new medium is inserted, the system reads a certain

This phenomenon is normal.

period following the insertion amount of data (directory, title, artist, etc.). This may take from a few

of a CD or connection of a

seconds to a few minutes.

USB memory stick.

.

347

Audio and Telematics

QUESTION

ANSWER

SOLUTION

The CD player sound is

poor.

The CD used is scratched or of poor quality.

Insert good quality CDs and store them in

suitable conditions.

The audio equipment settings (bass, treble, ambiences) are

unsuitable.

Set the treble or bass level to 0, without selecting

an ambience.

Some characters in the

media information are not

displayed correctly while

playing.

The audio system does not display some types of characters.

Use standard characters to name tracks and

folders.

Playing of streaming files

does not start.

The peripheral device connected does not support automatic play.

The Bluetooth profile does not allow the transfer of this information.

Start the playback from the device.

The names of tracks and

the track length are not

displayed on the screen

when streaming audio.

348

Audio and Telematics

Settings

QUESTION

ANSWER

SOLUTION

In changing the setting

of treble and bass the

equalizer setting is

deselected.

The selection of an equalizer setting imposes the balance settings.

Modifying one without the other is not possible.

Modify the balance or equalizer settings to obtain

the desired musical ambience.

In changing the equalizer

setting, treble and bass

return to zero.

When changing the

balance settings, the

distribution setting is

deselected.

The selection of a distribution setting imposes the balance settings. Modify the balance or distribution settings to

Modifying one without the other is not possible. obtain the desired musical ambience.

When changing an

distribution setting,

the balance setting is

deselected.

.

349

Audio and Telematics

QUESTION

ANSWER

SOLUTION

There is a difference in

sound quality between the Treble, Equalizer and Loudness can be adapted to the different

different audio sources.

For optimum sound quality, the audio settings for Volume, Bass,

Check that the audio settings for (Volume, Bass,

Treble, Equalizer, Loudness) are adapted to the

sources listened to. It is advisable to set the

Audio functions (Bass, Treble, Fr-Re balance,

Le-Ri balance) to the middle position, select the

"Linear", musical ambience and set the loudness

correction to the "Active" position in CD mode or

to the "Inactive" position in radio mode.

sound sources, which may result in audible differences when

changing source.

With the engine off, the

When the engine is switched off, the system's operating time

Start the vehicle's engine to increase the battery

charge.

system switches off after a depends on the state of charge of the battery.

few minutes of use. The switch-off is normal: the system switches to economy mode

and switches off to prevent discharging of the vehicle's battery.

350

Audio and Telematics

Telephone

QUESTION

ANSWER

SOLUTION

I cannot connect my

Bluetooth telephone.

The telephone's Bluetooth function may be switched off or the

telephone may not be visible.

-

Check that your telephone's Bluetooth

function is switched on.

Check in the telephone settings that it is

"visible to all".

The Bluetooth telephone is not compatible with the system.

The volume depends both on the system and on the telephone.

You can check the compatibility of your

telephone at www.citroen.co.uk (services).

The volume of the

telephone connected

in Bluetooth mode is

inaudible.

Increase the volume of the audio system, to

maximum if required, and increase the volume of

the telephone if necessary.

The ambient noise level has an influence on the quality of

telephone communication.

Reduce the ambient noise level (close the

windows, reduce the booster fan speed, slow

down, ...).

Some contacts are

duplicated in the list.

The options for synchronizing contacts are synchronizing the

contacts on the SIM card, the contacts on the telephone, or both.

When both synchronizations are selected, some contacts may be

duplicated.

Select "Display SIM card contacts" or "Display

telephone contacts".

Contacts are not shown in Some telephones offer display options. Depending on the settings

Modify the display setting in the telephone

directory.

alphabetical order.

chosen, contacts can be transferred in a specific order.

The system does not

The Bluetooth mode does not permit sending SMS text messages

receive SMS text messages. to the system.

.

351

Audio and Telematics -> 7-inch touch screen tablet (System 1) for Your Citroen C4 SUV Second Generation (2010-2018)

Related Topics

Audio and Telematics

Popular Owner Manuals

Latest Owner Manuals