Safety
The TOP TETHER is used to secure the
upper strap of child seats that have one. This
arrangement limits the forward tipping of the
child seat in the event of a front impact.
To attach the child seat to the TOP TETHER:
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
-
remove and stow the head restraint before
installing a child seat on this seat (refit it
once the child seat has been removed),
pass the strap of the child seat centrally
between the head restraint rod apertures,
raise the TOP TETHER cover, located on
the rear shelf (Saloon) or the roof (Tourer),
secure the upper strap fixing to the ring B
or C,
-
-
-
-
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in
your vehicle.
The ISOFIX child seats are fitted with
two latches which are secured easily on the
two rings A, following installation of the guides
(supplied with the seat).
Observe strictly the fitting instructions
provided with the child seat.
tighten the upper strap.
For information on the possibilities for
installing ISOFIX child seats in your
vehicle, refer to the summary table.
Some also have an upper strap which is
attached to the ring B or C.
170
English 
