Advertisement

Advertisement

Axles, Suspension, Steering -> Wheel and Tyres for Your Citroen C6 4 Door First Generation (2005-2012)

WHEEL AND TYRES  
3.0i 24S  
XFV  
2,7 24V  
UHZ  
Engine plate  
Tyre/circumference  
Type  
S
225/55 R17 97W/2,071 m  
245/45 R18 100W/2,065m  
245/45 R18 100W/2,065m  
Michelin PRIMACY  
T
Wheel  
A
7 J17-CH5-32  
SATURNE  
8 J18-CH5-33  
SAN MARIN 2  
8 J18-CH5-33  
SAN MARIN 2  
Name of rim  
Normal operating pressure:  
front/rear  
2,4/2,4  
2,4/2,4  
2,4/2,4  
2,4/2,4  
Pressure for maximum load :  
front/rear  
2,6/2,6  
2,4/2,4  
2,6/2,6  
2,6/2,6  
Pressure: loaded, high speed:  
front/rear  
2,4/2,4  
Tyre  
S
T
225/55 R17 97W  
Spare wheel  
7 J17-5-32  
2,4  
Normal operating pressure  
Pressure for maximum load  
Pressure: loaded, high speed  
2,6  
2,6  
2,6  
2,6  
2,4  
S = Standard fitting.  
NOTE: The label indicating the recommended tyre pressures is affixed to the front LH door pillar.  
T = Steel wheel.  
A = Alloy wheel.  
121  
WHEEL AND TYRES  
Identification of inflation pressures  
NOTE: The label indicating the recommended tyre pressures is affixed to the front  
LH door pillar.  
«a» Recommended tyre inflation pressures (empty and under load)  
«b» Tyre specifications  
«c» Type of tyres  
«d» Recommended inflation pressure for the spare wheel  
B2GP01FD  
122  
WHEEL AND TYRES  
Identification of the wheel bolts  
(1) Wheel bolt (all rim types)  
(2) Light alloy wheel  
(3) Steel aluminium wheel  
NOTE: If mixed fixing bolts are fitted on steel wheels, the shoulders of the bolts  
remain free.  
Tightening torques for the wheel bolts.  
9
1 m.daN  
B2GP00JD  
123  
WHEEL AND TYRES  
Deflation detection system  
(4) Valve  
(5) Antenna  
(8) Seal  
(9) Cap  
(10) Nut  
(6) HF transmitter unit  
(7) Washer  
Composition.  
A SIEMENS HF transmitter module (6) integral to each wheel in the place of the  
valve, each including a lithium battery.  
An HF receiver in the communication module under the dashboard.  
WARNING: Each time a tyre is replaced, it is necessary to replace the valve (4).  
WARNING: Each time a wheel rim is replaced, it is necessary to replace the  
seal (8).  
WARNING: Each time a transmitter module is changed, it is necessary to have  
the replacement recognised by the deflation detection ECU, using a diagnostic  
tool.  
B2GP01ND  
124