Advertisement

Advertisement

Hydraulics -> Suspension Spheres: General Specification for Your Citroen C6 4 Door First Generation (2005-2012)

SUSPENSION SPHERES: GENERAL SPECIFICATION  
Each suspension sphere is identified at "a", by one number and two letters, marked in bold characters:  
- The number consists of 2 digits, corresponding to the nitrogen pressure inside the suspension sphere.  
- The two letters identify the location of the suspension sphere.  
Other information marked on the suspension sphere:  
- Day of the year of manufacture.  
- Year of manufacture.  
- Time of manufacture.  
- Factory no. of the suspension sphere.  
B3BP1BJD  
198  
SUSPENSION SPHERES: SPECIFICATION - IDENTIFICATION  
Specifications.  
The «slimline» accumulators are grey in colour.  
NOTE: Recharging the «slimline» accumulators with nitrogen is impossible.  
Volume of nitrogen  
: 385 15 cc.  
Suspension cylinder accumulators (front).  
Engine version  
ES9A  
Suspension sphere marking  
GO  
Pressure rating (bars)  
50  
DT17BTED4  
Suspension cylinder accumulators (rear).  
Engine version  
ES9A  
Suspension sphere marking  
KS  
Pressure rating (bars)  
40  
DT17BTED4  
NOTE: The dampers are integral to the suspension cylinders (AMVAR cartridge). (*)  
(*) AMVAR = Amortissement Variable (variable damping).  
199  
SUSPENSION SPHERES: SPECIFICATION - IDENTIFICATION  
Stiffness regulator accumulators (front).  
NOTE: The dampers are integral to the hydractive regulator.  
Engine version  
ES9A  
Suspension sphere marking  
KR  
Pressure rating (bars)  
70  
DT17BTED4  
Stiffness regulator accumulators (rear).  
NOTE: The dampers are integral to the hydractive regulator.  
Engine version  
ES9A  
Suspension sphere marking  
KS  
Pressure rating (bars)  
40  
DT17BTED4  
The suspension cylinders on the same axle have to be equipped with the same type of suspension accumulators.  
IMPORTANT: Tightening torque for the suspension accumulators : 2,7 0,5 m.daN.  
200