Roof bars
USING ROOF BARS
Removal and refitting of the
roof bars
To use the transverse roof bars,
release the four locking levers located
at the base of the feet of each bar.
From the left-hand side, slide them
in their rails to the required notch,
supporting the foot of the bar with two
hands to slide it correctly.
Lock the four locking levers.
-
Remove the bolt, the stop and the
two washers at each location A.
Move the bars to the locations A.
Lift the two bars to remove them.
-
-
-
For greater ease, it is recommended
that two people carry out these
operations.
When the roof bars are not in use,
position them at the rear stop to avoid
excess consumption.
Use accessories recommended by
Automobiles CITROËN and follow
the fitting instructions in the manual
provided by the manufacturer of the
load-carrying roof bars.
Imperative: refit the bolt, the
stop and the two washers at each
location A.
To refit, proceed in the reverse order.
Maximum authorised weight on the
roof rack: 220 lbs. (100 kg)
5
English 
