Snow screen
VERY COLD CLIMATE SCREEN
FITTING
If fitted on your vehicle, this is a
removable part which permits complete
or partial covering of the front air intake
(grille, ...) to favour the increase in the
engine temperature when driving in
very low temperatures and to prevent
the entry of snow into the engine
compartment.
-
-
Offer up the screen facing its
centring pin A on the front bumper.
Put it in place by pressing at each
clip B located in the four corners.
REMOVAL
-
-
Pass a screwdriver into the hole
located near each of the clips.
Use the screwdriver as a lever to
unclip the four clips B in turn.
When the snow has cleared, do not
forget to remove the very cold climate
screen.
English 
