Get QUICK HELP -> Changing a bulb Guide for Citroen Dispatch Van First Generation (1994-2006)

Changing a bulb

Type A

All glass bulb: pull

gently as it is fitted by

pressure.

Type B

Bayonet bulb: press

on the bulb then turn it

anticlockwise.

Type C

Halogen bulb: release

the retaining spring from

its housing.

Halogen bulbs must be changed after

the headlamp has been off for several

minutes (risk of serious burns). Do not touch

the bulb directly with your fingers, use lint-

free cloths.

CHANGING A BULB

TYPES OF BULB

When each operation has been completed,

check the operation of the lighting.

Various types of bulb are installed on your vehicle. To remove them:

Changing a bulb

-

Ensure that the cover is refitted

correctly all the way round to ensure

sealing.

3. Direction indicators

Type B, PY21W - 21W (amber)

FRONT LAMPS

Open the bonnet. To access the bulbs, reach

behind the headlamp unit.

-

Turn the bulb holder a quarter turn

anticlockwise.

Carry out the operations in reverse order to

refit each bulb.

2. Sidelamps

Type A, W5W - 5W

-

Remove the bulb by pressing it lightly

while turning it anticlockwise.

-

Remove the cover by pulling the

flexible rubber tab.

Change the bulb.

1. Dipped / Main beam headlamps

-

Remove the bulb holder fitted by

pressure by pulling the connector.

Type C, H4 - 55W

-

Remove the centre cover by pulling

the flexible rubber tab.

-

Change the bulb.

Ensure that the cover is refitted

correctly all the way round to ensure

sealing.

4. Foglamps

Type C, H1 - 55W

-

Disconnect the electrical connector.

Release the retaining spring.

Contact a CITROËN dealer or a qualified

workshop.

Change the bulb taking care to align

the metal part with the slots in the

lamp.

7

Changing a bulb

High pressure jet washing

When using this type of jet washer

on stubborn dirt, do not persist on the

headlamps, the lamps and their surrounds to

avoid damaging their coating and seals.

DIRECTION INDICATOR SIDE

REPEATER

Front / Rear

COURTESY LAMPS

Type A, WY5W - 5W (amber)

Type A, 12V 5W - 5W

-

Push the repeater towards the rear and

disengage it.

-

Unclip the lens by sliding a screwdriver

in the slots on each side of the courtesy

lamp.

Support the connector and turn the bulb

holder a quarter turn to the left.

-

Pull the bulb and change it.

Turn the bulb a quarter turn to the left,

remove it and change it.

Clip the lens in its housing and ensure

that it is secured correctly.

When refitting, engage the repeater

towards the rear and bring it towards

the front.

Amber coloured bulbs (direction indicators

and side repeaters) must be replaced with

bulbs of identical specification and colour.

Changing a bulb

REAR LAMPS

-

Identify the faulty bulb then open the

rear doors to 180°. Refer to the "Access"

section of chapter 2.

-

Move aside the 8 tabs then extract the

bulb holder.

For more information on bulbs, refer to the

"Types of bulb".

Remove the failed bulb by pressing it

lightly while turning it anticlockwise.

-

Remove the two fixing nuts.

1. Brake lamps / sidelamps

Pull the lens unit from the outside.

Change the bulb.

Type B, P21/5W - 21/5W

Holding the lamp unit, disconnect the

electrical connector.

2. Direction indicators

Type B, PY21W - 21W (amber)

When refitting, take care to correctly

reposition:

3. Reversing lamps

Type B, P21W - 21W

-

the 8 tabs,

the two white lugs in the two rubber

holes to maintain the sealing of the

lamp unit,

4. Foglamps

Type B, P21W - 21W

-

the supply wire to avoid trapping it.

7

Changing a bulb

NUMBER PLATE

LAMPS

THIRD BRAKE LAMP

Type B, P21W - 21W

Type A, W5W - 5W

Lamp located on the outside (hinged doors)

Lamp located on the inside (tailgate)

With tailgate

-

Unscrew the two screws using a Torx^TM

-

Unscrew the two screws using a Torx^TM

-

Move aside the plastic lens using a

screwdriver, on the point indicated by

the arrow.

20 screwdriver.

-

Remove the lamp.

Change the bulb.

-

Remove the plastic cover.

Remove the bulb holder moving aside

the two tabs.

-

Change the bulb.

Replace the plastic lens and press on it.

Type B, P21W - 21W

-

Remove the failed bulb by pressing it

lightly while turning it anticlockwise.

With hinged doors

Lamp on door top

Change the bulb.

-

Unclip the interior trim.

-

Remove the screws using an 8 mm

spanner.

Disconnect the connector by moving

aside its tab.

Remove the failed bulb by pressing it

lightly while turning it anticlockwise.

-

Remove the plastic cover.

Change the bulb.

Turn the bulb holder a quarter turn

anticlockwise.

-

Change the bulb.

QUICK HELP -> Changing a bulb for Your Citroen Dispatch Van First Generation (1994-2006)

Related Topics

QUICK HELP

Popular Owner Manuals

Latest Owner Manuals