Repairing a wheel
-
adjust the pressure using the
Warning, the sealant cartridge contains
ethylene-glycol, this product is harmful
if swallowed and causes irritation to the
eyes. Keep this product out of reach of
children.
compressor (to inflate: switch A in
position "1"; to deflate: switch A in
position "0" and press button B), in
accordance with the vehicle's tyre
pressure label (located on the door
aperture, on the driver's side), then
remember to check that the leak has
been sealed correctly (no further
loss of pressure after several miles
(kilometres)),
The expiry date of the sealant is indicated
under the cartridge.
The cartridge is intended for a single use;
once opened, it must be replaced.
After use, do not discard the cartridge
into the environment, take it to a
CITROËN dealer or to a specialised waste
disposal site.
-
-
remove the compressor, then stow the
complete kit,
drive at reduced speed (50 mph (80 km/h)
max) limiting the distance travelled to
approximately 125 miles (200 km),
Do not forget to obtain a new sealant
cartridge, available from a CITROËN dealer
or a qualified workshop.
-
visit a CITROËN dealer or a qualified
workshop as soon as possible to have
the tyre repaired or replaced by a
technician.
-
-
-
connect the compressor pipe directly to
the valve of the repaired wheel.
connect the compressor's electrical plug
to the vehicle's 12V socket again,
start the vehicle again and let the
engine run,
English 