Get Audio and telematics Guide for Citroen Ds3 SUV First Generation (2009-2019)

Audio and telematics

This section covers emergency and assistance calls, as well as the

functions of the audio-navigation units, such as MP3-compatible player,

USB player, Bluetooth system, the eMyWay with 16/9 colour screen,

auxiliary inputs, Hi-Fi audio system.

279

EMERGENcY OR ASSISTANcE cALL

cITROËN Localised Emergency call

cITROËN Localised Assistance call

In an emergency, press this button for more than

2 seconds. Flashing of the green LED and a voice

message conﬁrm that the call has been made to the

CITRoËN Localised Emergency Call centre*.

Press this button for more than 2 seconds to request

assistance if the vehicle breaks down.

A voice message conﬁrms that the call has been made*.

Pressing this button again immediately cancels the request.

The cancellation is conﬁrmed by a voice message.

Pressing this button again immediately cancels the call. The green LED

goes off.

Pressing this button (at any time) for more than 8 seconds cancels the call.

Operation of the system

The green LED remains on (without ﬂashing) when communication is

established. It goes off at the end of communication.

When the ignition is switched on, the

green LED comes on for 3 seconds

indicating that the system is operating

correctly.

If the orange LED ﬂashes: there is a

system fault.

This call is dealt with by the CITRoËN Localised Emergency Call centre

which receives locating information from the vehicle and can send a

detailed alert to the appropriate emergency services. In countries in

which the team is not operational, or when the locating service has

been expressly declined, the call is dealt with directly by the emergency

services (112) without the vehicle location.

If the orange LED is on continuously: the

backup battery must be replaced.

In either case, contact a CITRoËN

If an impact is detected by the airbag control unit, and

independently of the deployment of any airbags, an emergency call

is made automatically.

dealer.

If you purchased your vehicle outside the CITROËN dealer network,

we invite you to have a dealer check the conﬁguration of these services

and, if desired, modiﬁed to suit your wishes. In a multi-lingual country,

conﬁguration is possible in the ofﬁcial national language of your choice.

If you beneﬁt from the CITROËN eTouch offer, you also have available

additional services in your MyCITRoËN personal space, via the CITRoËN

Internet website in your country, accessible on www.citroen.com.

For technical reasons, particularly to improve the quality of Telematic

services to customers, the manufacturer reserves the right to carry out

updates to the vehicle's on-board telematic system.

* These services are subject to conditions and availability.

Consult a CITROËN dealer.

281

eMyWay

SATELLITE NAVIGATION SYSTEM

MULTIMEdIA BLUETOOTH

TELEPHONE AUdIO SYSTEM

cONTENTS

282

284

285

287

300

303

313

316

322

323

324

328

01 First steps - control panel

02 Steering mounted controls

03 General operation

04 Navigation - Guidance

05 Traffic information

06 Using the telephone

07 Radio

p.

The system is protected in such a way that it will only

operate in your vehicle.

08 Music media players

09 Audio settings

For safety reasons, the driver must only carry out

operations which require prolonged attention while the

vehicle is stationary.

When the engine is switched off and to prevent

discharging of the battery, the system switches off

following the activation of the energy economy mode.

10 configuration

11 Screen menu map

Frequently asked questions

FIRST STEPS

01

Select:

Selection and conﬁrmation OK knob:

Selection of an item on the screen or in a list or a menu,

then conﬁrmation with a short press.

Other than for menus and lists, a short press displays a

contextual menu depending on the current screen.

Rotation with map displayed: zoom the map scale in and

out.

-

the previous/next line in a list or menu.

the previous / next media folder.

step by step selection of the previous/

next radio frequency.

open the

"Conﬁguration" menu.

Long press: access

to the GPS coverage

and the navigation

demonstration mode.

-

the previous / next MP3 folder.

Move up/down, in "Move the map" mode.

Short press without the

engine running: on / off.

Short press with the engine

running: audio source off /

restore.

Volume adjustment (each

source is independent,

including TA messages and

navigation instructions).

open the "Trafﬁc

abandon the current

Select:

MOdE button: Selection

of the type of permanent

display.

Long press: black screen

(DARK).

access to the

information" menu

operation, up one level

"Navigation - guidance"

menu and display the

recent destinations.

-

the next lower / higher radio

frequency automatically.

the previous / next CD track, MP3

track or media.

the left / right of the screen when a

menu is displayed.

and display the current in the menu.

trafﬁc alerts.

Long press: return to

the permanent display.

Move left / right in "Move the map" mode.

283

FIRST STEPS

01

access to the "RAdIO" menu and

display the list of stations received.

access to the "MUSIc" menu, and display of the CD/MP3/

apple^®tracks and folders.

open the "Telephone" menu

Long press: display the audio settings

screen for the radio tuner source.

Long press: display the audio settings screen for the

"MEdIA" (CD/USB/iPod/Streaming/AUX) sources.

and display the list of recent

calls or accept an incoming call.

Continuous press:

reinitialisation of the system.

Short press: select pre-set radio station.

Long press: pre-set the current station.

02 STEERING MOUNTEd cONTROLS

RADIO: change to the next radio station in the list.

Long press: automatic search for a higher frequency.

CD: select the next track.

CD: continuous press: fast forward play.

SRc/TEL button:

change the audio source,

start a call from the address book,

call/end call on the telephone,

press for more than 2 seconds: access

to the address book.

RADIO: change to the previous radio

station in the list.

Long press: automatic search for a

lower frequency.

CD: select the previous track.

CD: continuous press: fast reverse.

RADIO: select the previous/next preset

station.

Select the next entry in the address book.

Volume increase.

Mute: press the volume

increase and decrease

buttons simultaneously.

Restore the sound by

pressing one of the

two volume buttons.

Volume decrease.

285

03 GENERAL OPERATION

Press the MOdE button several times in succession for access to the following displays:

"MAP IN WINdOW"

(If navigation guidance in

progress)

"RAdIO"

"TELEPHONE"

(If conversation in progress)

"FULL ScREEN MAP"

Changing the audio source:

SETUP: PARAMETERS

RAdIO: RADIO broadcasts.

MUSIc: playing MUSIC.

date and time, display conﬁguration, sound,

vehicle settings.

For cleaning the screen, the use of a soft, non-abrasive cloth

(spectacles cloth) is recommended, with no additional product.

For the details of the menus, refer to the "Screen menu map"

section.

GENERAL OPERATION

03

display according to context

FULL ScREEN MAP OR IN A

TELEPHONE (call in

A press on the knob gives access

to short-cut menus according to the

display in the screen.

NEW WINdOW:

progress):

Stop / Restore guidance

1

Private mode

1

Select destination

1

RAdIO:

Put call on hold

1

Enter an address

2

1

dTMF ring tones

change waveband

1

directory

2

FM

Hang up

2

GPS coordinates

2

AM

divert route

1

MUSIc MEdIA PLAYERS,

cd or USB (according to

media):

Services announcements

1

Move the map

1

Trafﬁc announcements (TA)

Info. on location

2

Play modes:

Information

Select as destination

2

Normal

1

Entertainment

Special or Urgent

Select as stage

2

Random

1

Save this place (contacts)

2

Random on all media

Quit map mode

1

2

Repetition

1

Guidance criteria

1

287

NAVIGATION - GUIdANcE

04

Access to the "NAVIGATION" menu

To make full use of all of the

functions of your navigation

system, update the mapping

regularly. Contact a

"Navigation - guidance"

CITRoËN dealer or order

your mapping update at

http://citroen.navigation.com

Press NAV.

List of recent destinations.

"Select destination"

"Journey leg and route"

"Guidance options"

"Map management"

"Stop / Restore guidance"

a short press on the end of the

lighting control stalk repeats

the last navigation message.

Go from the list to the menu (left/right).

To delete the list of recent destinations, select "Guidance

options" in the navigation menu then select "delete last

destinations" and conﬁrm. Select "Yes" then conﬁrm.

Deleting just one destination is not possible.

or

04 NAVIGATION - GUIdANcE

Selecting a destination

Towards a new destination

Selection the town from the list offered, then

conﬁrm

A pre-set list (by entering the ﬁrst few

letters) of the towns in the country selected

can be accessed directly by selecting and

conﬁrming "List" in the screen.

Press NAV to display the

"Navigation - guidance" menu.

Select "Select destination" and

conﬁrm, then select "Enter an address"

and conﬁrm.

If possible, enter the "Road" and "N°/X"

information in the same way.

Select "Archive" to save the address entered in a contact ﬁle.

Select the "country" function then

conﬁrm.

After about 60 seconds with no address entered, the system returns

to the last home page; to return to the current input, start again with

steps 1 and 2 then press again to ﬁnd the current input.

Select the "Town" or "Post code"

function then conﬁrm.

Conﬁrm "OK" to start guidance.

Select the guidance criteria: "Fastest

route", "Shortest route" or optimised

"distance/Time", then select the

desired restriction criteria: "With tolls",

"With Ferry", or "Trafﬁc info" then

conﬁrm "OK".

Select the letters in the name of the

town or the characters in a post code

one at a time, conﬁrming each one with

the knob.

289

04 NAVIGATION - GUIdANcE

Towards a recent destination

Towards a contact in the contacts directory

Press NAV to display the

"Navigation - guidance" menu.

Navigation towards a contact is only possible if it has an address

entered in the audio navigation system.

Select the desired destination and

conﬁrm to start guidance.

Press NAV to display the

"Navigation - guidance" menu.

delete recent destinations

Select "Select destination" and

conﬁrm, then select "directory" and

conﬁrm.

Press NAV to display the

"Navigation - guidance" menu.

Selection the desired destination from

your contacts and conﬁrm "OK" to start

the guidance.

Select "Options" and conﬁrm and then

"delete recent destinations" and

conﬁrm.

04 NAVIGATION - GUIdANcE

Towards GPS coordinates

Towards a point on the map

With the map displayed, press OK to

Press NAV to display the

"Navigation - guidance" menu.

display the contextual menu. Select

"Move the map" and conﬁrm.

Select "Select destination" and

conﬁrm, then select "GPS coordinates"

and conﬁrm.

Move the cursor using the control to

identify the desired destination.

Press OK to display the contextual

menu for "Move the map" mode.

Enter the GPS coordinates and conﬁrm

"OK" to start the guidance.

Select "Select as destination" or

"Select as stage" and conﬁrm.

291

04 NAVIGATION - GUIdANcE

The points of interest (PoI) indicate all of the service locations in the vicinity

(hotels, various businesses, airports...).

Towards points of interest (POI)

Select "Search by Name" to search for POIs by name and not by

proximity.

Press NAV to display the

"Navigation - guidance" menu.

Select the "Enter an address" function

and conﬁrm, then select Select

destination and conﬁrm.

Search for POIs in the categories

suggested in the following pages.

To select a PoI close to your current

location, select "POI" and conﬁrm, then

select "Around the current place" and

conﬁrm.

Select the POI and conﬁrm "OK" to start

the guidance.

To select a POI as a stage on the route,

select "POI" and conﬁrm, then select "On

the route" and conﬁrm.

To select a POI as a destination, ﬁrst

enter the country and town (see "Towards

a new destination"), select "POI" and

conﬁrm, ﬁnally select "Near" and conﬁrm.

This icon appears when several POIs are grouped

together in the same area. Zooming in on this icon

shows details of the POIs.

04 NAVIGATION - GUIdANcE

List of principal points of interest (POI)

airport

Service station

Cinema

Railway station

bus station

Port

Garage

Theme parks

Hospital, Chemist, Vet

Police station

CITRoËN

Covered car park

Car park

Industrial estate

School

Rest area

Supermarket

Town hall

Post ofﬁce

Hotel

Vending machine

Restaurant

Cafeteria

Sports complex, sports centre,

sports ground

Museum, Culture, Theatre,

Historic monument

Swimming pool

Tourist information, Tourist

attraction

Bed and breakfast

Winter sports resort

Risk areas / Danger areas*

*

According to availability in the country.

An annual mapping update allows new points of interest to be presented to you.

You can also update the Risk areas / Danger areas every month.

The detailed procedure is available on:

http://citroen.navigation.com.

293

04 NAVIGATION - GUIdANcE

Settings for risk area / danger area alerts

These functions are only available if risk areas have been

downloaded and installed on the system.

The detailed procedure for updating risk area POIs can be found at

http://citroen.navigation.com.

Press NAV to display the "Navigation -

guidance" menu.

Select "Guidance options" and conﬁrm,

then select "Set parameters for risk

areas" and conﬁrm.

Select:

-

"Visual alert"

"audible alert"

"Alert only in guidance"

"Overspeed alarm only".

The choice of time of notiﬁcation deﬁnes

how long in advance that Risk area

warnings are given.

Select "OK" to conﬁrm the screen.

04 NAVIGATION - GUIdANcE

Adding a stage

Organising stages

To organise stages, carry out operations

1 to 2 again, then select "Order/delete

journey legs" and conﬁrm.

Press NAV to display the

"Navigation - guidance" menu.

Select the stage that you want to move

in the order.

Select "Journey leg and route" then

conﬁrm.

Select "Add a stage" then conﬁrm.

Select and conﬁrm to save the

modiﬁcations.

The address of the stage is entered as

a destination, by "Enter an address",

a contact in "directory", or "Previous

destinations".

Select "delete" to delete the stage.

Select "close to" a route passing

close to the stage or "Strict" for a route

passing through the stage.

Conﬁrm "OK" to start the guidance, and

give a general indication of the guidance

route.

295

04 NAVIGATION - GUIdANcE

Route options

calculation criteria

Select "Deﬁne calculation criteria" and

conﬁrm.

This function allows modiﬁcation of:

-

the guidance criteria: ("Fastest

route", "Shortest route",

"distance/Time"),

Press NAV to display the

"Navigation - guidance" menu.

-

the exclusion criteria: ("With tolls"

or "With Ferry"),

trafﬁc avoidance: ("Trafﬁc info").

If trafﬁc avoidance (Trafﬁc info) is selected, the system suggests

an alternative route if there is a delay on the guidance route.

Select "Guidance options" and conﬁrm.

Select "OK" and conﬁrm to save the

modiﬁcations.

04 NAVIGATION - GUIdANcE

Map management

Selecting the points of interest displayed on the map

Select from the various categories the

ones that you want to display on the

screen.

Press NAV to display the

"Navigation - guidance" menu.

Select "default" to have only "Filling stations, garages" and

"Risk areas" appear on the map (if installed in the system).

Select "Map management" and conﬁrm.

Select "OK" then conﬁrm and select

"OK" again then conﬁrm to save the

modiﬁcations.

Select "Map details" and conﬁrm.

297

04 NAVIGATION - GUIdANcE

Map orientation

Select:

-

"Vehicle direction" to have the map

follow the direction of travel,

Press NAV to display the

"Navigation - guidance" menu.

"North direction" to keep the map

always North up,

"Perspective view" to display a

perspective view.

The colour of the map, different from the day and night mode, is

conﬁgured in the "SETUP" menu.

Select "Map management" and conﬁrm.

Street names are visible on the map from the 100 m scale.

Select "Map orientation" and conﬁrm.

04 NAVIGATION - GUIdANcE

Navigation voice synthesis

Adjusting the volume / deactivation

The volume of messages can be adjusted during the transmission

of the message using the volume adjustment control.

Select the volume graph and conﬁrm.

The volume setting of guidance messages is also accessible via

the "SETUP" / "Voice synthesis" menu.

Adjust the volume to the desired level

and conﬁrm.

Press NAV to display the

"Navigation - guidance" menu.

Select "deactivate" to deactivate voice messages.

Select "Guidance options" and conﬁrm.

Select "OK" and press the dial to

conﬁrm.

Select "Set speech synthesis" and

conﬁrm.

299

04 NAVIGATION - GUIdANcE

Male voice / Female voice

Press SETUP to display the

conﬁguration menu.

Select "Voice synthesis" and conﬁrm.

Select "Select male voice" or "Select

female voice" then conﬁrm "Yes" to

activate a male or female voice. The

system restarts.

TRAFFIc INFORMATION

05

Access to the "TRAFFIc INFORMATION" menu

"Trafﬁc information"

Press "TRAFFIc".

"Geographic ﬁlter"

"Select TMc station"

(automatic, manual)

List of TMC messages in order

of distance from the vehicle.

"display/do not display

messages"

Go from the list to the menu (left/right).

or

301

05 TRAFFIc INFORMATION

configure the filtering and display of TMc messages

TMC (Trafﬁc Message Channel) messages with GPS Navigation provide trafﬁc information in real time.

The system offers a choice of:

-

"Retain all the messages",

Press the TRAFFIc button to display the

"Trafﬁc information" menu.

or

-

"Retain the messages"

● "Around the vehicle", (conﬁrm

the mileage to modify and select

the distance),

● "On the route".

Select the "Geographic ﬁlter" function

and conﬁrm.

Conﬁrm "OK" to save the modiﬁcations.

We recommend:

-

a ﬁlter on the route and

a ﬁlter around the vehicle of:

-

12 miles (20 km) in urban areas,

30 miles (50 km) on motorways.

05 TRAFFIc INFORMATION

Principal TMc symbols

Receiving TA messages

The TA (Trafﬁc Announcement) function gives priority to TA alert

messages. To operate, this function needs good reception of a

radio station transmitting this type of message. When a trafﬁc report

is transmitted, the current audio source (Radio, CD, USB, ...) is

interrupted automatically to play the TA message. Normal playback

of the audio source resumes at the end of the transmission of the

message.

Black and blue triangle: general information, for example:

Weather reports

Wind

Trafﬁc reports

Fog

Parking

Snow / ice

Press RAdIO to display the menu.

Red and yellow triangle: trafﬁc information, for example:

Select "Service announcements" then

conﬁrm.

Modiﬁed signage

Slippery surface

Delay

Narrow carriageway

accident

activate or deactivate "TA" then conﬁrm.

Roadworks

Road closed

Danger

Risk of explosion

Demonstration

No entry

The volume setting for TA messages can be adjusted only during the

transmission of this type of alert.

Activate or deactivate the function at any time by pressing

the button.

Trafﬁc jam

During a message, press the button to interrupt it.

303

USING THE TELEPHONE

06

Access to the "TELEPHONE" menu

In the top bar of the permanent

display

"Telephone"

No telephone connected.

Telephone connected.

Incoming call.

Press this button.

List of recent calls sent and

received with the telephone

connected to the system.

"dial"

"directory of contacts"

"contacts management"

"Phone functions"

"Bluetooth functions"

"Hang up"

Outgoing call.

Synchronisation of

contacts in progress.

Telephone call in

progress.

Go from the list to the menu (left/right).

To make a call, select a number in the list and conﬁrm "OK"

to start the call.

or

Connecting a different telephone deletes the list of

recent calls.

06 USING THE TELEPHONE

For reasons of safety and because they require prolonged attention

on the part of the driver, the operations for pairing the Bluetooth

mobile telephone to the hands-free system of the audio unit must be

carried out with the vehicle stationary.

Pairing a Bluetooth telephone

First connection

You can check the compatibility of your telephone

at www.citroen.co.uk (services).

Procedure from the system

Quick procedure from the telephone

activate the telephone's bluetooth function

and ensure that it is "visible to all" (telephone

conﬁguration).

In the Bluetooth menu of your telephone, select the

name "CITRoËN" from the list of devices detected.

Press this button.

Enter a minimum 4 ﬁgure code in the telephone and

conﬁrm.

Select "Bluetooth functions" and

conﬁrm.

Select "Peripherals search" and

conﬁrm.

Enter the same code in the system,

select "OK" and conﬁrm.

The list of peripheral devices detected

is displayed. Wait until the "connect"

button is available.

305

06 USING THE TELEPHONE

The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone

manual and with your network provider for details of the services available to you.

Select the name of the desired

peripheral from the list of devices

detected then conﬁrm

Enter a minimum 4 ﬁgure code in the telephone

and conﬁrm.

Select "connect" and conﬁrm.

Enter the same code in the system,

select "OK" and conﬁrm.

The system offers to connect the

telephone:

Then accept automatic connection on the telephone to allow the

telephone to reconnect automatically every time the vehicle is

started.

-

in "Hands-free mode" (telephone

only),

in "Audio" mode (streaming: playing

music ﬁles on the telephone),

or "All" (for selection of both

modes).

Depending on the type of telephone, the system will ask you to

accept or not the transfer of your contacts.

Select "OK" and conﬁrm.

The "Hands-free mode" should be used in preference if

"Streaming" is not desired.

on return to the vehicle,the last telephone connected

automatically reconnects, within around 30 seconds after

switching on the ignition (Bluetooth activated and visible).

To modify the automatic connection mode, remove the pairing

and pair the telephone again with the desired mode.

The ability of the system to connect in only one mode depends on

the telephone. The two modes may both connect by default.

06 USING THE TELEPHONE

directory configuration / Synchronisation with the telephone

Select "Import all the entries" to import

all the contacts in the telephone and

Press PHONE then select "contacts

management" and conﬁrm.

save them in the system.

Once imported, a contact remains visible

whatever telephone is connected.

Select "Synchronization options":

Select "New contact" to enter a new

contact.

-

No synchronization: only the

contacts saved in the system

(always present).

-

Display telephone contacts: only the

contacts saved in the telephone.

Display SIM card contacts: only the

contacts saved on the SIM card.

Display all phone contacts:

contacts on the SIM card and in the

telephone.

Select "Sort by Name/First name" or

"Sort by First name/Name" to choose

the order in which they appear.

Select "contact mem. status" to see the

number of contacts saved in the system

or imported, and the free memory.

Select "delete all contacts" to delete

the contacts saved in the system.

307

06 USING THE TELEPHONE

Editing, importing or deleting a contact

Press PHONE then select "directory of

contacts" and conﬁrm.

It is not possible to modify or delete contacts in the telephone or the

SIM card via the Bluetooth connection.

Select "Search", then turn the knob to

choose in numerical or alphabetical order

a group of contacts from the entries made

previously, then conﬁrm.

Once the contact has been imported, the Bluetooth symbol

disappears, replaced by the telephone symbol which shows that the

contact has been saved in the system.

Go to the list of contacts, select the

desired contact then conﬁrm.

In the "directory of contacts" menu, the import and deletion of

contacts is done one by one.

Select "Open" to view a contact on the

telephone or modify a contact saved in

the system.

Select "Import" to copy a contact from

the telephone to the system.

Select OK or press the back button to exit

this menu.

Select "delete" to delete a contact

recorded in the system.

06 USING THE TELEPHONE

Use of the telephone is not recommended while driving. We

recommended that you park safely or make use of the steering

mounted controls.

Making a call

calling a contact

calling a new number

Press TEL or twice on PHONE.

Press PHONE twice.

Select "directory of contacts" then

conﬁrm.

Select "dial" then conﬁrm.

Select the desired contact and conﬁrm.

If access was via the PHONE button,

select "call" and conﬁrm.

Dial the telephone number using the

virtual keypad selecting each number

in turn.

Select the number and conﬁrm to start

the call.

Conﬁrm "OK" to make the call.

309

06 USING THE TELEPHONE

Ending a call

calling a recently entered number

Press PHONE then select "OK" to end

the call.

Press TEL, select "call list" and

conﬁrm,

or

Or make a long press on TEL at the

steering mounted controls.

Press PHONE to display the calls log.

Or make two short presses on TEL at

the steering mounted controls.

Select the desired number and conﬁrm.

or press the MOdE button, as many

times as necessary, until the telephone

screen is displayed.

To erase the calls log, press PHONE twice, select "Phone

functions" and conﬁrm then select "delete calls log" and conﬁrm.

Press "OK" to display the contextual

menu then select "Hang up" and

conﬁrm.

It is always possible to start a call directly from the telephone; park

the vehicle as a safety measure.

06 USING THE TELEPHONE

Receiving a call

An incoming call is announced by a ring and a superimposed display

on the screen.

"Yes" to accept the call is selected by

default.

Press "OK" to accept the call.

Select "No" and conﬁrm to reject the

call.

a short press on TEL accepts an

incoming call.

A long press on TEL rejects an incoming

call.

311

06 USING THE TELEPHONE

Options during a call*

Select "dTMF ring tones" to use the

numerical keypad, so as to navigate

through the menu of an interactive vocal

server.

During a call, press the MOdE button

several times to select display of the

telephone screen, then press "OK" to

open the contextual menu.

Select "Hang up" to end the call.

Or make a short press on this button.

Select "Private mode" and conﬁrm to

it is possible to hold a 3-way conference

call by making 2 calls in succession*.

Select "conference mode call" in the

contextual menu accessible using this

button.

take the call on the handset.

or select "Hands-free mode" and

conﬁrm to take the call via the vehicle's

speakers.

Select "Put call on hold" and conﬁrm to

put the current call on hold.

or select "Resume the call" and

conﬁrm to resume the call on hold.

* Depending on the compatibility of the phone and your service plan.

06 USING THE TELEPHONE

Managing paired telephones

changing the ringtone

Press PHONE twice.

Select "Phone functions" and conﬁrm.

Select "Bluetooth functions".

Select "Ring options" and conﬁrm.

Select "List of the paired peripherals"

and conﬁrm.

You can adjust the volume and the type

of ringtone.

It is possible to:

-

"connect" or "disconnect" the

selected telephone,

-

delete the pairing of the selected

telephone.

Select "OK" and conﬁrm to save the

changes.

It is also possible to select all pairings.

313

RAdIO

07

Access to the "RAdIO" menu

"FM / AM band"

Press RAdIO.

alphabetical list of stations

received.

"change Waveband" ("AM / FM")

"Guidance options" ("TA, RdS")

"Audio settings" (see this

section)

"Update radio list"

Go from the list to the menu (left/right).

Press 5 or 6 or use the rotary control to select the

previous or next station in the list.

or

07 RAdIO

changing waveband

Selecting a station

The external environment (hill, building, tunnel, underground car park...) may interfere with the reception, including in RDS station tracking mode. This

phenomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a fault with the audio system.

The quality of reception is represented by the number of

active waves in this symbol.

By alphabetical list

Press RAdIO, select the station of your

choice and conﬁrm.

Press RAdIO or OK to display the

contextual menu.

By automatic frequency search

Press 7 or 8 for the automatic search

for a lower or higher radio frequency.

Or turn the thumb wheel at the steering

mounted controls.

Select "change waveband".

Select "AM / FM" and conﬁrm.

By manual frequency search

Press 5 or 6 to adjust the radio

frequency step by step.

315

07 RAdIO

Presetting a station

Activate / deactivate RdS

RDS, if activated, allows you to continue listening to the same

station by automatic retuning to alternative frequencies. However,

in certain conditions, coverage of an RDS station may not be

assured throughout the entire country as radio stations do not

cover 100 % of the territory. This explains the loss of reception of

the station during a journey.

Press RAdIO.

After selecting a station, press one of the buttons

on the numerical keypad for 2 seconds to preset the

current station.

An audible signal conﬁrms that the station has been

preset.

Select "Guidance options" then

conﬁrm.

Press the button on the numerical keypad to recall a

preset station.

Or press then turn the thumb wheel at the steering

mounted controls.

activate or deactivate "RdS" then

conﬁrm.

MUSIc MEdIA PLAYERS

08

Access to the "MUSIc MEdIA PLAYER" menu

"MEdIA"

Press MUSIc.

List of the current media

tracks.

"change media"

"Eject USB device"

(if USb connected)

"Play mode" ("Normal",

"Random", "Random on all

media", "Repetition")

"Audio settings" (see this section)

"Activate / deactivate AUX input"

Go from the list to the menu (left/right).

or

317

08 MUSIc MEdIA PLAYERS

cd, MP3 cd / USB player

Information and advice

The audio equipment will only play audio ﬁles with ".wma, .aac, .ﬂac,

.ogg and .mp3" ﬁle extensions and with a bit rate of between 32 Kbps

and 320 Kbps.

It also supports VBR (Variable Bit Rate) mode.

No other type of ﬁle (.mp4, .m3u...) can be played.

WMA ﬁles must be of the standard wma 9 type.

The sampling rates supported are greater than 32 KHz.

The system supports USB mass storage or iPod

devices via the USB port (suitable cable not supplied).

If a partitioned USB memory key is connected to the

system, only the ﬁrst partition is recognised.

Control of the peripheral device is with the audio

system controls.

The number of tracks is limited to 2000 maximum,

999 tracks per folder.

If the current consumption at the USB port exceeds

500 mA, the system goes into protection mode and

deactivates the port.

Other peripherals, not recognised on connection, must

be connected to the auxiliary socket using a Jack cable

(not supplied).

It is advisable to restrict ﬁle names to 20 characters, without using of

special characters (e.g.: " " ? ; ù) to avoid any playing and displaying

problems.

Give preference to multimedia USB memory sticks (in general

formatted FAT 32 File Allocation Table).

In order to be able to play a recorded CDR or CDRW, when recording

it is preferable to select the ISO 9660 level 1, 2 or Joliet standard.

If the disc is recorded in another format (udf, ...), it may not be played

correctly.

It is recommended that the same recording standard is always used

for an individual disc, with as low a speed as possible (4x maximum)

for optimum sound quality.

The system does not support the operation of an Apple^®player and a

USB memory stick connected at the same time.

In the particular case of a multi-session CD, the Joliet standard is

recommended.

It is recommended that ofﬁcial Apple^®USb cables are used to ensure

correct operation.

08 MUSIc MEdIA PLAYERS

Sources

Selection of source

The SOURcE button on the steering mounted controls allows a

direct change to the next media source.

Insert the CD in the player, insert the USb

memory stick in the USB player or connect the

USB peripheral to the USB port using a suitable

cable (not supplied).

"cd / cd MP3"

The system builds playlists (in temporary

memory), an operation which can take from

a few seconds to several minutes at the ﬁrst

connection.

"USB, iPod"

"RAdIO"

Reduce the number of non-music ﬁles and the

number of folders to reduce the waiting time.

"STREAMING"

"AUX"

The playlists are updated every time the ignition

is switched off or connection of a USB memory

stick. However, the system memorises these

lists and if they are not modiﬁed, the loading

time will be shorter.

Play starts automatically after a period which

depends on the capacity of the USB memory

stick.

Press MUSIc to display the "MEdIA"

menu.

Select "Following media source" and

conﬁrm.

Repeat the operation as many times as necessary to obtain the

desired media source (except for radio which is accessible either

with SOURcE or RAdIO).

319

08 MUSIc MEdIA PLAYERS

Selecting a track

MUSIc: List of USB or cd tracks or

folders

Previous track.

/

Next track.

Up or down in the list.

/

Previous folder.

Conﬁrm, next menu level.

/

Next folder.

Fast forward.

Fast backward.

Long press

/

+

/

Up one menu level.

/

Pause: long press on SRc.

08 MUSIc MEdIA PLAYERS

connecting APPLE^®players

Audio streaming

Connect the apple^®player to the USB port using a suitable cable

(not supplied).

Play starts automatically.

Streaming allows audio ﬁles on your telephone to be played via the

vehicle's speakers.

Control is via the audio system.

Connect the telephone: see "USING THE TELEPHONE".

Select "Audio" or "All" proﬁle.

The classiﬁcations available are those of the portable device

connected (artists / albums / genres / playlists / audiobooks /

podcasts).

The default classiﬁcation used is by artist. To modify the classiﬁcation

used, return to the ﬁrst level of the menu then select the desired

classiﬁcation (playlists for example) and conﬁrm to go down through

the menu to the desired track.

If play does not start automatically, it may be necessary to start the

audio playback from the telephone.

Control is from the peripheral device or by using the audio system

buttons.

The "Shufﬂe tracks" mode on an iPod^®corresponds to the "Random"

mode on the audio system.

The "Shufﬂe albums" mode on an iPod^®corresponds to the "Random

all" on the audio system.

"Shufﬂe tracks" is restored by default on each connection.

Once connected in streaming mode, the telephone is considered to be

a media source.

It is recommended that you activate "Repeat" on the bluetooth

peripheral.

The version of software in the audio system may not be compatible

with the generation of your Apple^®player.

321

08 MUSIc MEdIA PLAYERS

Using the auxiliary input (AUX)

JAcK/USB audio cable not supplied

Select "Activate / deactivate AUX

input and conﬁrm.

First adjust the volume of your portable

device (to a high level). Then adjust the

volume of your audio system.

Connect the portable device

(MP3, WMA player…) to the

JACK auxiliary audio socket or

USB port using a suitable cable.

Press MUSIc to display the "MUSIc"

menu.

Display and management of the controls are via the portable device.

09 AUdIO SETTINGS

They are accessible by the MUSIc

button in the control panel or by a long

press on RAdIO according to the source

in use.

The audio settings (Equalizer, Bass, Treble and Loudness) are

different and independent for each sound source.

The settings for distribution and balance are common to all sources.

-

"Equalizer" (choice of 6 musical ambiences)

"Bass"

"Treble"

"Loudness" (Activate/Deactivate)

"distribution" ("driver", "All passengers")

"Le-Ri balance" (Left/Right)

"Fr-Re balance" (Front/Rear)

"Auto. Volume" depending on road speed (Activate/Deactivate)

On-board audio: Arkamys^©Sound Staging.

With Sound Staging, the driver and passengers are immersed in an

"audio scene" recreating the natural atmosphere of an auditorium:

truly a part of the scene and its surroundings.

This new sensation is made possible by software in the audio system

which processes the digital signals from the media players (radio,

CD, MP3…) without changing the audio settings. This processing

takes account of the characteristics of the passenger compartment to

produce optimum results.

The Arkamys^©software installed in your audio system processes

the digital signal from the media players (radio, CD, MP3, ...) and

recreates a natural musical scene, with harmonious placement of

instruments and voices in the space in front of passengers, level with

the windscreen.

The distribution (or spatialisation using the Arkamys^©system) of sound

is an audio process that allows the audio quality to be adapted to the

number of listeners in the vehicle.

323

10 cONFIGURATION

display configuration

Select "choose colour" and conﬁrm to

select the screen colour harmony and

the map presentation mode:

-

day mode,

night mode,

automatic day/night mode,

according to whether the

headlamps are on.

Press SETUP to display the

"Conﬁguration" menu.

Select "Adjust luminosity" and conﬁrm

to adjust the screen brightness.

Press "OK" to save the changes.

The settings for day and night are

independent.

Select "Display conﬁguration" and

conﬁrm.

11 ScREEN MENU MAP(S)

Previous destinations

Map management

MAIN FUNcTION

1

3

Map orientation

Order/delete journey legs

2

Option A

1

Vehicle direction

divert route

3

2

Option A1

2

chosen destination

North direction

2

3

option a11

3

Perspective view

Guidance options

1

Option B...

1

Deﬁne calculation criteria

Map details

2

"Navigation - guidance"

Fastest route

Move the map

3

2

MENU

Shortest route

Mapping and updating

description of risk areas database

3

Distance/Time

Select destination

3

1

Enter an address

With tolls

With Ferry

Trafﬁc info

2

Stop / Restore guidance

1

Directory

With Ferry

3

Trafﬁc info

325

11 ScREEN MENU MAP(S)

call

contact mem. status

2

"TRAFFIc INFORMATION"

MENU

Open

Phone functions

2

1

Geographic filter

Import

Search

delete

cancel

Ring options

1

2

Retain all the messages:

Retain the messages:

around the vehicle

on the route

delete calls log

2

Bluetooth functions

1

List of the paired peripherals

3

2

Connect

contacts management

3

1

New contact

Select TMc station

Disconnect

1

2

Automatic TMc

Delete

Sort by First name/Name

delete all contacts

2

Manual TMc

Delete all

List of TMc stations

Cancel

Import all the entries

Synchronization options

No synchronization

Peripherals search

Rename radiotelephone

display / do not display

messages

1

2

3

"TELEPHONE" MENU

Hang up

Display telephone contacts

Display SIM card contacts

Display all phone contacts

1

3

dial

1

directory of contacts

1

11 ScREEN MENU MAP(S)

Bass

"RAdIO" MENU

"MUSIc" MENU

2

Treble

change Waveband

1

change Media

1

Loudness

FM

2

cd

2

Activated / Deactivated

distribution

AM

3

Bluetooth streaming

2

Options

2

1

USB/iPod

2

Driver

RdS station tracking

3

2

AUX

2

All passengers

Le-Ri balance

Fr-Re balance

Auto. Volume

Activated / Deactivated

Audio settings

Read mode

1

Equalizer

2

Normal

2

None

3

Random

2

Classical

Jazz

3

Random on all media

2

3

Repetition

2

Rock

Update radio list

1

Audio settings

1

Techno

Vocal

Activate / deactivate AUX

input

1

327

11 ScREEN MENU MAP(S)

"SETUP" MENU

Select language

define vehicle parameters*

1

Français

Trip computer

2

display configuration

1

English

Italiano

Alert log

2

choose colour

2

Status of functions

Harmony:

3

Portuguese

Español

deutsch

Nederlands

Turkçe

Cartography:

Day mode

4

Night mode

4

Auto Day/Night

Adjust luminosity

Set date and time

Select units

2

Polski

Русский

cestina

Hrvatski

Magyar

Speech synthesis setting

1

Guidance instructions volume

2

Select male voice/Select female voice

* The settings vary according to the vehicle.

FREQUENTLY ASKEd QUESTIONS

The following table groups together the answers to the most frequently asked questions concerning your audio system.

QUESTION

ANSWER

SOLUTION

The route calculation is

not successful.

The guidance criteria may conﬂict with the current location (exclusion of

toll roads on a toll motorway).

Check the guidance criteria on the Navigation

Menu, "Guidance options"\ "Deﬁne calculation

criteria".

I am unable to enter my

post code.

The system only accepts post codes of up to 7 characters.

The POIs have not been selected.

The POIs do not appear.

Select the POIs in the list of POIs.

The risk areas audible

warning does not work.

The audible warning is not active.

Activate audible warnings in the Guidance options

menu, "Navigation - guidance", "Set parameters

for risk areas".

The system does not

suggest a detour around

an incident on the route.

The guidance criteria do not take account of TMC messages.

Select the "Trafﬁc info" function in the list of

guidance criteria.

I receive a Risk area alert Other than guidance, the system announces all Risk areas positioned in a Zoom in on the map to view the exact position of

which is not on my route. cone located in front of the vehicle. It may provide an alert for a Risk area the Risk area. Select "On the route" to no longer

located on nearby or parallel roads.

receive alerts other than guidance or to reduce the

time for the announcement.

329

FREQUENTLY ASKEd QUESTIONS

QUESTION

ANSWER

SOLUTION

Certain trafﬁc jams

along the route are not

indicated in real time.

On starting, it is several minutes before the system begins to receive the

trafﬁc information.

Wait until the trafﬁc information is being received

correctly (display of the trafﬁc information icons on

the map).

The ﬁlters are too restrictive.

Modify the "Geographic ﬁlter" settings.

In certain countries, only major routes (motorways...) are listed for the

trafﬁc information.

This phenomenon is normal. The system is

dependent on the trafﬁc information available.

The altitude is not

displayed.

On starting, the initialisation of the GPS may take up to 3 minutes to

receive more than 4 satellites correctly.

Wait until the system has started up completely.

Check that there is a GPS coverage of at least

4 satellites (long press on the SETUP button, then

select "GPS coverage").

Depending on the geographical environment (tunnel...) or the weather,

the conditions of reception of the GPS signal may vary.

This phenomenon is normal. The system

is dependent on the GPS signal reception

conditions.

I am unable to connect

my Bluetooth telephone.

The telephone's Bluetooth function may be switched off or the telephone

may not be visible.

-

Check that your telephone's Bluetooth

function is switched on.

Check in the telephone settings that it is

"visible to all".

The Bluetooth telephone is not compatible with the system.

The volume depends both on the system and on the telephone.

You can check the compatibility of your telephone

on www.citroen.co.uk (services)

The volume of the

telephone connected

in Bluetooth mode is

inaudible.

Increase the volume of the audio system, to

maximum if required, and increase the volume of

the telephone if necessary.

The ambient noise level has an inﬂuence on the quality of telephone

communication.

Reduce the ambient noise level (close the windows,

reduce the booster fan speed, slow down, ...).

FREQUENTLY ASKEd QUESTIONS

QUESTION

ANSWER

SOLUTION

Some contacts are

duplicated in the list.

The options for synchronizing contacts are synchronizing the contacts

on the SIM card, the contacts on the telephone, or both. When both

synchronizations are selected, some contacts may be duplicated.

Select "Display SIM card contacts" or "Display

telephone contacts".

Contacts are not shown

in alphabetical order.

Some telephones offer display options. Depending on the settings

chosen, contacts can be transferred in a speciﬁc order.

Modify the display setting in the telephone

directory.

The system does not receive The Bluetooth mode does not permit sending SMS text messages to the

SMS text messages.

system.

The CD is ejected

automatically or is not

played by the player.

The CD is inserted upside down, is unplayable, does not contain any

-

Check that the CD is inserted in the player the

right way up.

Check the condition of the CD: the CD cannot

be played if it is too damaged.

Check the content in the case of a recorded

CD: refer to the information and advice in the

"MUSIC MEDIA PLAYERS" section.

audio data or contains an audio format which the player cannot play.

The CD has been recorded in a format that is not compatible with the

player (udf, ...).

The CD is protected by an anti-pirating protection system which is not

recognised by the audio system.

-

The audio system's CD player does not play DVDs.

Some recorded CDs will not be played by

the audio system because they are not of the

correct quality.

There is a long waiting

When a new medium is inserted, the system reads a certain amount of

This phenomenon is normal.

period following the insertion data (directory, title, artist, etc.). This may take from a few seconds to a

of a CD or connection of a

USB memory stick.

few minutes.

The CD player sound is

poor.

The CD used is scratched or of poor quality.

Insert good quality CDs and store them in suitable

conditions.

The audio equipment settings (bass, treble, ambiences) are unsuitable.

Set the treble or bass level to 0, without selecting

an ambience.

331

FREQUENTLY ASKEd QUESTIONS

QUESTION

ANSWER

SOLUTION

Some characters in the

media information are not

displayed correctly while

playing.

The audio system does not display some types of characters.

Use standard characters to name tracks and

folders.

Playing of streaming ﬁles The peripheral device connected does not support automatic play.

does not start.

Start the playback from the device.

The names of tracks and The Bluetooth proﬁle does not allow the transfer of this information.

the track length are not

displayed on the screen

when streaming audio.

The quality of reception

of the radio station

listened to gradually

deteriorates or the stored

stations do not function

(no sound, 87.5 Mhz is

displayed...).

The vehicle is too far from the transmitter used by the station listened

to or there is no transmitter in the geographical area through which the

vehicle is travelling.

Activate the "RDS" function by means of the

short-cut menu to enable the system to check

whether there is a more powerful transmitter in the

geographical area.

The environment (hills, buildings, tunnels, basement car parks...) block

reception, including in RDS mode.

This phenomenon is normal and does not indicate

a fault with the audio system.

The aerial is absent or has been damaged (for example when going

through a car wash or into an underground car park).

Have the aerial checked by a CITROËN dealer.

I cannot ﬁnd some radio

stations in the list of

stations received.

The station is not received or its name has changed in the list.

Some radio stations send other information in place of their name

(the title of the song for example).

The name of the radio

station changes.

The system interprets this information as the name of the station.

FREQUENTLY ASKEd QUESTIONS

QUESTION

ANSWER

SOLUTION

In changing the setting

of treble and bass the

equalizer setting is

deselected.

The selection of an equalizer setting imposes the balance settings.

Modifying one without the other is not possible.

Modify the balance or equalizer settings to obtain

the desired musical ambience.

In changing the equalizer

setting, treble and bass

return to zero.

When changing the

balance settings, the

distribution setting is

deselected.

The selection of a distribution setting imposes the balance settings.

Modifying one without the other is not possible.

Modify the balance or distribution settings to

obtain the desired musical ambience.

When changing an

distribution setting,

the balance setting is

deselected.

There is a difference in

sound quality between

the different audio

For optimum sound quality, the audio settings for Volume, Bass, Treble,

Equalizer and Loudness can be adapted to the different sound sources,

which may result in audible differences when changing source (radio,

CD...).

Check that the audio settings for (Volume, Bass,

Treble, Equalizer, Loudness) are adapted to

the sources listened to. It is advisable to set the

aUDIo functions (bass, Treble, Fr-Re balance,

Le-Ri balance) to the middle position, select the

"None", musical ambience and set the loudness

correction to the "Active" position in CD mode or

to the "Inactive" position in radio mode.

sources (radio, CD...).

333

FREQUENTLY ASKEd QUESTIONS

QUESTION

ANSWER

SOLUTION

With the engine off, the

When the engine is switched off, the system's operating time depends on Start the vehicle's engine to increase the battery

system switches off after the battery charge.

a few minutes of use.

charge.

The switch-off is normal: the system switches to economy mode and

switches off to prevent discharging of the vehicle's battery.

Playback of my USB

memory stick starts only

after a very long wait

(around 2 to 3 minutes).

Some ﬁles supplied with the memory stick may greatly slow down access Delete the ﬁles supplied with the memory stick

to reading the memory stick (multiplication by 10 of the catalogue time).

and limit the number of sub-folders in the ﬁle

structure on the memory stick.

When I connect my

When the iPhone connects automatically as a telephone, it forces the

Disconnect and reconnect to the USb port (the

USB function takes priority over streaming).

iPhone as telephone and streaming function. The streaming function takes the place of the USB

to the USb port at the

same time, I am unable

to play the music ﬁles.

function which is then not useable, there is a period without sound of the

track being played with Apple^®players.

335

Audio system

AUdIO SYSTEM / BLUETOOTH^®

cONTENTS

Your Audio system is coded in such a way that it will

only operate in your vehicle.

p.

336

337

338

339

342

345

348

353

01 First steps

02 Steering mounted controls

03 Main menu

04 Audio

05 USB Box

06 Bluetooth functions

07 Screen menu map(s)

Frequently asked questions

For safety reasons, the driver must only carry out

operations which require prolonged attention while the

vehicle is stationary.

When the engine is switched off and to prevent

discharging of the battery, the audio equipment may

switch off after a few minutes.

01 FIRST STEPS

Display the list of

Audio settings: front/

rear fader, left/right

balance, bass/treble,

loudness, audio

Select source:

local stations.

radio, audio CD / MP3 CD, USB,

Jack connection, Streaming,

AUX.

Long press: CD

tracks or MP3

folders (CD / USB).

Selection of AM / FM

wavebands.

abandon the current

operation.

ambiences.

TA (Trafﬁc Announcements)

on/off.

Long press: PTY* (radio

Programme TYpe) mode.

Eject CD.

Select the screen display

Automatic frequency search

down/up.

Select previous/next CD, MP3

or USB track.

mode:

Date, audio functions, trip

computer, telephone.

Conﬁrm.

On/off, volume setting.

The DARK button changes the screen display

for improved driving comfort at night.

Buttons 1 to 6:

Select a pre-set radio station.

Long press: pre-set a station.

Display main menu.

Select next frequency down/up.

Select previous/next MP3 folder.

Select previous/next folder / genre /

artist / playlist (USB).

1^stpress: upper bar only illuminated.

2^ndpress: black screen.

3^rdpress: return to standard display.

*

Available according to version.

337

02 STEERING MOUNTEd cONTROLS

Radio: automatic search for a higher frequency.

CD / MP3 / USB: selection of the next track.

CD / USB: continuous press: fast forwards play.

Move in the list.

Change audio source.

Conﬁrm a selection.

Call/end call on the telephone.

Press for more than 2 seconds:

telephone main menu.

Radio: automatic search for a lower

frequency.

CD / MP3 / USB: selection of the

previous track.

CD / USB: continuous press: fast

reverse.

Move in the list.

Radio: select the previous/next pre-set

station.

USB: select genre / artist / folder from the

classiﬁcation list.

Select the previous/next item in a menu.

Volume increase.

Mute: press the volume

increase and decrease

buttons simultaneously.

The sound is restored by

pressing one of the two

volume buttons.

Volume decrease.

03 MAIN MENU

TELEPHONE:

bluetooth hands-free,

pairing, management

of a call.

AUdIO FUNcTIONS:

radio, CD, USB, options.

Screen c

TRIP cOMPUTER: entering

of distances, alerts, status of

functions.

PERSONALISATION-

cONFIGURATION:

vehicle parameters,

display, languages.

Screen A

For a detailed global view of the

menus available, refer to the

"Screen menu map" section.

339

The external environment (hills, buildings, tunnels, basement car parks, ...)

may block reception, including in RDS mode. This is a normal effect of the

way in which radio waves are transmitted and does not indicate any failure

of the audio system.

04 AUdIO

Radio

RdS

Selecting a station

Press the SoURCE button several

times in succession and select the

radio.

Press the MENU button.

Select aUDIo FUNCTIoNS then

press OK.

Press the baND aST button to select

a waveband: FM1, FM2, FMast, AM.

Select the FM WaVEbaND

PREFERENCES function then press

OK.

Brieﬂy press one of the buttons to

carry out an automatic search of the

radio stations.

Select aCTIVaTE RDS then press

OK. RDS appears on the screen.

Press one of the buttons to carry out

a manual search up / down for radio

frequencies.

In radio mode, press OK directly to activate / deactivate RDS

mode.

Press the LIST REFRESH button to

display the list of stations received

locally (30 stations maximum).

To update this list, press for more

than two seconds.

The RDS, if displayed, enables you to continue listening to the same station by

automatic retuning to alternative frequencies. However, in certain conditions,

coverage of an RDS station may not be assured throughout the country as

radio stations do not cover 100 % of the territory. Under conditions of very

weak reception, the system may change to a regional station.

04 AUdIO

cd

Receiving TA messages

Playing a cd

The TA (Trafﬁc Announcement) function gives priority to TA alert

messages. To operate, this function needs good reception of a

radio station transmitting this type of message. When a trafﬁc

report is transmitted, the current audio source (Radio, CD, ...) is

interrupted automatically to play the TA message. Normal playback

of the audio source resumes at the end of the transmission of the

message.

Insert circular compact discs only.

Some anti-pirating systems, on original discs or CDs copied using a

personal recorder, may cause faults which are no reﬂection on the

quality of the vehicle's player.

Without pressing the EJECT button, insert a CD in the player, play

begins automatically.

To play a disc which has already been

inserted, press the SoURCE button

several times in succession and

select CD.

Press the Ta button to activate or

deactivate trafﬁc messages.

Press one of the buttons to select a

track on the CD.

Press the LIST REFRESH button to display the list of tracks on the

CD.

Press and hold one of the buttons for

fast forwards or fast backwards.

341

04 AUdIO

MP3 cd

Playing an MP3 compilation

MP3 cd

Information and advice

Insert an MP3 compilation in the player.

The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3,

is an audio compression standard which permits the recording of

several tens of music ﬁles on a single disc.

The audio equipment searches for all of the music tracks, which

may take anything between a few seconds and several tens of

seconds, before play begins.

On a single disc, the CD player can read up to 255 MP3 ﬁles

spread over 8 folder levels. However, it is advisable to keep to

a limit of two levels to reduce the access time before the CD is

played.

In order to be able to play a recorded CDR or CDRW, when

recording, the ISO 9660 level 1.2 or Joliet ﬁle format is

recommended.

While the CD is being played, the folder structure is not followed.

All of the ﬁles are displayed on a single level.

If the disc is recorded in another format, it may not be played

correctly.

It is recommended that the same recording format is always

used for an individual disc, with as low a speed as possible

(4x maximum) for optimum sound quality.

To play a disc which has already

been inserted, press the SoURCE

button several times in succession

and select CD.

In the particular case of a multi-session CD, the Joliet format is

recommended.

Press one of the buttons to select a

folder on the CD.

The audio system will only play ﬁles with the extension ".mp3" with

a sampling rate of 22.05 KHz or 44.1 KHz. No other type of ﬁle

(.wma, .mp4, .m3u...) can be played.

Press one of the buttons to select a

track on the CD.

Press the LIST REFRESH button to display the list of directories of

the MP3 compilation.

It is advisable to restrict ﬁle names to 20 characters without using

special characters (e.g. " ? ; ù) to avoid any playing or displaying

problems.

Press and hold one of the buttons for

fast forward or backward play.

Empty CDs are not recognised and may damage the system.

05 USB PLAYER

Using the USB BOX

connecting a USB memory stick

Connect the memory stick to the port, directly or

This unit consists of a USB port and an auxiliary

Jack socket*. The audio ﬁles are transmitted

from a portable device - digital player or a USB

memory stick - to your Audio system and heard

via the vehicle's speakers.

using a lead. If the audio equipment is switched

on, the USb source is detected as soon as it

is connected. Play begins automatically after a

delay which depends on the capacity of the USb

memory stick.

The ﬁle formats supported are .mp3 (mpeg1

layer 3 only) and .wma (standard 9 only,

128 kbits/sec compression).

USB memory stick or Apple^®player of

generation 5 or later:

Certain playlist formats are supported (.m3u, ...)

On reconnection of the previous memory stick

used, play is resumed automatically with the last

track played.

-

Give preference to multimedia USB memory

sticks (in general formatted FAT 32 File

allocation Table),

the apple^®player lead is essential,

-

navigation through the ﬁle database is also

possible by means of the steering mounted

controls.

The system puts together playlists (temporary memory) created

over a period which depends on the capacity of the USB device.

The other sources are available during this time.

The playlists are updated each time the ignition is switched off or

each time a USB memory stick is connected.

When connecting for the ﬁrst time, the classiﬁcation suggested

is by folder. When you reconnect, the classiﬁcation selected

previously is retained.

other apple^®players of earlier generations and

players using the MTP protocol*:

-

play via Jack-Jack lead only (not supplied),

navigation through the ﬁle database is from

the portable device.

* Depending on vehicle.

343

05 USB PLAYER

Using the USB PORT

Press one of these buttons to gain

access to the previous / next track on

the classiﬁcation list currently being

played.

Press and hold one of the buttons for

fast forward or backward play.

Press and hold LIST to display the

different classiﬁcations.

Select by Folder / Artist / Genre / Playlist,

press OK to select the classiﬁcation

required, then press OK again to conﬁrm.

Press one of these buttons to

gain access to the previous / next

Genre, Folder, artist or Playlist on

the classiﬁcation list currently being

played.

-

by Folder: all folders containing audio

ﬁles recognised on the peripheral

device.

by Artist: all of the artist names

deﬁned in the ID3 Tags, classiﬁed in

alphabetical order.

-

by Genre: all of the genres deﬁned in

the ID3 Tags.

by Playlist: in accordance with the

playlists recorded on the USB device.

connecting an Apple^®player via the USB port

The lists available are Artist, Genre and Playlist (as deﬁned in the

apple^®player).

Selection and Navigation are described in steps 1 to 4 above.

Press LIST brieﬂy to display the

previously selected classiﬁcation.

Navigate through the list using the left/

right and up/down buttons.

Conﬁrm the selection by pressing OK.

Do not connect a hard disk or USB connection device other

than audio equipment to the USB port. This could damage your

installation.

05 USB PLAYER

Using the auxiliary input (AUX)

Adjusting the volume of the auxiliary

source

JAcK socket or USB port (according to vehicle)

The auxiliary input, JACK or USB, allows the connection of a

portable device (MP3 player...).

First adjust the volume of your portable device.

Do not connect a device to both the JACK socket and the USB

port at the same time.

Connect the portable device (MP3

player…) to the JACK socket or to

the USB port, using a suitable cable

(not supplied).

Then adjust the volume of your audio

system.

The display and control is via the portable device.

Press the SoURCE button several

times in succession and select AUX.

345

06 BLUETOOTH FUNcTIONS

The services offered depend on the network, the SIM card and the

Bluetooth telephone

Screen c

(Available according to model and version)

compatibility of the Bluetooth equipment used.

Consult your telephone's manual and your operator to ﬁnd out which

services are available to you.

Pairing a telephone / First connection

The ﬁrst 4 telephones recognised are displayed in this window.

For safety reasons and because they require prolonged attention

on the part of the driver, the operations for pairing of the Bluetooth

mobile telephone with the Bluetooth hands-free system of your

audio equipment must be carried out with the vehicle stationary

and the ignition on.

The TELEPHONE menu permits access to the following functions

in particular: Directory*, Call list, Pairing management.

* If your telephone is fully compatible.

Select the telephone to be connected from the list. Only one

telephone can be connected at a time.

Go to www.citroen.co.uk for more information (compatibility, more

help, ...).

activate the telephone's bluetooth function

and ensure that it is "visible to all" (telephone

conﬁguration).

A virtual keypad is displayed in the screen:

enter a code with at least 4 digits.

Conﬁrm by pressing OK.

A message is displayed in the screen of the

Press the MENU button.

In the menu, select:

telephone chosen. To accept the pairing, enter the

same code on the telephone, then conﬁrm with OK.

If pairing fails, the number of attempts is not limited.

-

bluetooth telephone function -

A message that the pairing has been successful appears in the

screen.

audio

-

Bluetooth conﬁguration

Perform a Bluetooth search

The automatic connection authorised is only active after the

telephone has been conﬁgured.

The directory and the call list can be accessed after the

synchronisation period.

A window is displayed with a message that a search is in progress.

06

BLUETOOTH FUNcTIONS

Receiving a call

Making a call

An incoming call is announced by a ring and a superimposed

display in the vehicle's screen.

From the Bluetooth telephone function Audio menu, select Manage

the telephone call then Call, Call list or Directory.

Press this button for more than two seconds for

access to your directory, then navigate with the

thumb wheel.

Select the YES tab on the display

using the buttons and conﬁrm by

pressing OK.

or

To dial a number, use your telephone's keypad,

with the vehicle stationary.

Press this button to accept the call.

The system accesses the telephone's contacts directory, depending

on compatibility, and while the Bluetooth connection with it is

maintained.

With certain telephones connected by bluetooth you can send a

contact to the directory of the audio system.

Contacts imported in this way are saved in a permanent directory

visible to all, whatever the telephone connected.

The menu for the directory is not accessible if it is empty.

347

06

BLUETOOTH FUNcTIONS

Bluetooth audio streaming*

Wireless transmission of music ﬁles on the telephone, played via

the audio equipment. The telephone must be able to manage the

appropriate Bluetooth proﬁles (Proﬁles A2DP / AVRCP).

Ending a call

Initiate the pairing between the telephone and

the vehicle. This pairing can be initiated from

the vehicle's telephone function menu or via the

telephone's keypad. Refer to the steps in "Pairing

a telephone" on the previous pages. During the

pairing phase, the vehicle must be stationary with

the key in the ignition.

During a call, press this button for more than

2 seconds.

Conﬁrm with OK to end the call.

Select the telephone to be connected from the telephone function menu.

The audio system connects to a newly paired telephone

automatically.

Activate the streaming source by

pressing the SOURCE button**.

The tracks to be played can be

controlled as usual via the buttons on

the audio system control panel and

the steering mounted controls***.

The contextual information can be

displayed on the screen.

* Depending on the compatibility of the telephone.

** In certain cases, playing of the Audio ﬁles must be initiated from the

keypad.

*** If the telephone supports the function.

07 ScREEN MENU MAP(S)

Screen A

MAIN FUNcTION

Radio-cd

Options

1

Option A

1

RdS options

diagnostic

View

Option A1

2

REG mode

option a11

2

3

cd repeat

abandon

2

Option B...

1

Shufﬂe play

2

Vehicle config*

1

R wiper in rev

2

Guide lighting

2

* The settings vary according to vehicle.

349

07

ScREEN MENU MAP(S)

display adjust

Language

Units

1

Year

Français

Italiano

Temperature: °celsius / °Fahrenheit

2

Fuel consumption: KM/L -

L/100 - MPG

Month

day

Nederlands

Portuguès

Portuguès-Brasil

deutsch

Hour

Minutes

12 H/24 H mode

English

Español

cestina

Hrvatski

Magyar

07

ScREEN MENU MAP(S)

Press the OK dial for access to short-cut menus according

to the display on the screen:

Screen c

cd / MP3 cd

USB

RAdIO

activate / deactivate Intro

activate / deactivate track repeat (of the

current folder / artist / genre / playlist)

activate / deactivate RdS

1

activate / deactivate track repeat (the

entire current cd for cd, the entire

current folder for MP3 cd)

activate / deactivate REG mode

activate / deactivate radiotext

1

activate / deactivate random play (of the

current folder / artist / genre / playlist)

activate / deactivate random play (the

entire current cd for cd, the entire

current folder for MP3 cd)

1

351

07

ScREEN MENU MAP(S)

Pressing the MENU button displays:

Screen c

Audio functions

Trip computer

1

FM preferences

Enter distance to destination

Distance: x miles

2

alternative frequencies (RDS)

3

activate / deactivate

Alert log

4

Regional mode (REG)

Diagnostics

activate / deactivate

State of systems*

Systems activated or deactivated

4

Radio-text information (RDTXT)

activate / deactivate

4

Play modes

2

Album repeat (RPT)

3

activate / deactivate

Track random play (RDM)

activate / deactivate

4

3

* The settings vary according to vehicle.

07

ScREEN MENU MAP(S)

Personalisation-

Bluetooth telephone

1

configuration

Deﬁne vehicle settings*

Bluetooth conﬁguration

Connect/Disconnect an equipment

Telephone function

2

Display conﬁguration

Video-brightness adjustment

normal video

3

Audio Streaming function

Consult the paired equipment

4

inverse video

4

brightness (- +) adjustment

Setting the date and time

setting day/month/year

hour/minute adjustment

choice of 12 h / 24 h mode

Choice of units

4

Delete a paired equipment

Perform a Bluetooth search

4

3

4

call

2

Calls list

Audio and telematics for Your Citroen Ds3 SUV First Generation (2009-2019)

Related Topics

Popular Owner Manuals

Latest Owner Manuals