Get Audio and telematics -> Audio system Guide for Citroen Ds3 SUV First Generation (2009-2019)

335

Audio system

AUdIO SYSTEM / BLUETOOTH^®

cONTENTS

Your Audio system is coded in such a way that it will

only operate in your vehicle.

p.

336

337

338

339

342

345

348

353

01 First steps

02 Steering mounted controls

03 Main menu

04 Audio

05 USB Box

06 Bluetooth functions

07 Screen menu map(s)

Frequently asked questions

For safety reasons, the driver must only carry out

operations which require prolonged attention while the

vehicle is stationary.

When the engine is switched off and to prevent

discharging of the battery, the audio equipment may

switch off after a few minutes.

01 FIRST STEPS

Display the list of

Audio settings: front/

rear fader, left/right

balance, bass/treble,

loudness, audio

Select source:

local stations.

radio, audio CD / MP3 CD, USB,

Jack connection, Streaming,

AUX.

Long press: CD

tracks or MP3

folders (CD / USB).

Selection of AM / FM

wavebands.

abandon the current

operation.

ambiences.

TA (Trafﬁc Announcements)

on/off.

Long press: PTY* (radio

Programme TYpe) mode.

Eject CD.

Select the screen display

Automatic frequency search

down/up.

Select previous/next CD, MP3

or USB track.

mode:

Date, audio functions, trip

computer, telephone.

Conﬁrm.

On/off, volume setting.

The DARK button changes the screen display

for improved driving comfort at night.

Buttons 1 to 6:

Select a pre-set radio station.

Long press: pre-set a station.

Display main menu.

Select next frequency down/up.

Select previous/next MP3 folder.

Select previous/next folder / genre /

artist / playlist (USB).

1^stpress: upper bar only illuminated.

2^ndpress: black screen.

3^rdpress: return to standard display.

*

Available according to version.

337

02 STEERING MOUNTEd cONTROLS

Radio: automatic search for a higher frequency.

CD / MP3 / USB: selection of the next track.

CD / USB: continuous press: fast forwards play.

Move in the list.

Change audio source.

Conﬁrm a selection.

Call/end call on the telephone.

Press for more than 2 seconds:

telephone main menu.

Radio: automatic search for a lower

frequency.

CD / MP3 / USB: selection of the

previous track.

CD / USB: continuous press: fast

reverse.

Move in the list.

Radio: select the previous/next pre-set

station.

USB: select genre / artist / folder from the

classiﬁcation list.

Select the previous/next item in a menu.

Volume increase.

Mute: press the volume

increase and decrease

buttons simultaneously.

The sound is restored by

pressing one of the two

volume buttons.

Volume decrease.

03 MAIN MENU

TELEPHONE:

bluetooth hands-free,

pairing, management

of a call.

AUdIO FUNcTIONS:

radio, CD, USB, options.

Screen c

TRIP cOMPUTER: entering

of distances, alerts, status of

functions.

PERSONALISATION-

cONFIGURATION:

vehicle parameters,

display, languages.

Screen A

For a detailed global view of the

menus available, refer to the

"Screen menu map" section.

339

The external environment (hills, buildings, tunnels, basement car parks, ...)

may block reception, including in RDS mode. This is a normal effect of the

way in which radio waves are transmitted and does not indicate any failure

of the audio system.

04 AUdIO

Radio

RdS

Selecting a station

Press the SoURCE button several

times in succession and select the

radio.

Press the MENU button.

Select aUDIo FUNCTIoNS then

press OK.

Press the baND aST button to select

a waveband: FM1, FM2, FMast, AM.

Select the FM WaVEbaND

PREFERENCES function then press

OK.

Brieﬂy press one of the buttons to

carry out an automatic search of the

radio stations.

Select aCTIVaTE RDS then press

OK. RDS appears on the screen.

Press one of the buttons to carry out

a manual search up / down for radio

frequencies.

In radio mode, press OK directly to activate / deactivate RDS

mode.

Press the LIST REFRESH button to

display the list of stations received

locally (30 stations maximum).

To update this list, press for more

than two seconds.

The RDS, if displayed, enables you to continue listening to the same station by

automatic retuning to alternative frequencies. However, in certain conditions,

coverage of an RDS station may not be assured throughout the country as

radio stations do not cover 100 % of the territory. Under conditions of very

weak reception, the system may change to a regional station.

04 AUdIO

cd

Receiving TA messages

Playing a cd

The TA (Trafﬁc Announcement) function gives priority to TA alert

messages. To operate, this function needs good reception of a

radio station transmitting this type of message. When a trafﬁc

report is transmitted, the current audio source (Radio, CD, ...) is

interrupted automatically to play the TA message. Normal playback

of the audio source resumes at the end of the transmission of the

message.

Insert circular compact discs only.

Some anti-pirating systems, on original discs or CDs copied using a

personal recorder, may cause faults which are no reﬂection on the

quality of the vehicle's player.

Without pressing the EJECT button, insert a CD in the player, play

begins automatically.

To play a disc which has already been

inserted, press the SoURCE button

several times in succession and

select CD.

Press the Ta button to activate or

deactivate trafﬁc messages.

Press one of the buttons to select a

track on the CD.

Press the LIST REFRESH button to display the list of tracks on the

CD.

Press and hold one of the buttons for

fast forwards or fast backwards.

341

04 AUdIO

MP3 cd

Playing an MP3 compilation

MP3 cd

Information and advice

Insert an MP3 compilation in the player.

The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3,

is an audio compression standard which permits the recording of

several tens of music ﬁles on a single disc.

The audio equipment searches for all of the music tracks, which

may take anything between a few seconds and several tens of

seconds, before play begins.

On a single disc, the CD player can read up to 255 MP3 ﬁles

spread over 8 folder levels. However, it is advisable to keep to

a limit of two levels to reduce the access time before the CD is

played.

In order to be able to play a recorded CDR or CDRW, when

recording, the ISO 9660 level 1.2 or Joliet ﬁle format is

recommended.

While the CD is being played, the folder structure is not followed.

All of the ﬁles are displayed on a single level.

If the disc is recorded in another format, it may not be played

correctly.

It is recommended that the same recording format is always

used for an individual disc, with as low a speed as possible

(4x maximum) for optimum sound quality.

To play a disc which has already

been inserted, press the SoURCE

button several times in succession

and select CD.

In the particular case of a multi-session CD, the Joliet format is

recommended.

Press one of the buttons to select a

folder on the CD.

The audio system will only play ﬁles with the extension ".mp3" with

a sampling rate of 22.05 KHz or 44.1 KHz. No other type of ﬁle

(.wma, .mp4, .m3u...) can be played.

Press one of the buttons to select a

track on the CD.

Press the LIST REFRESH button to display the list of directories of

the MP3 compilation.

It is advisable to restrict ﬁle names to 20 characters without using

special characters (e.g. " ? ; ù) to avoid any playing or displaying

problems.

Press and hold one of the buttons for

fast forward or backward play.

Empty CDs are not recognised and may damage the system.

05 USB PLAYER

Using the USB BOX

connecting a USB memory stick

Connect the memory stick to the port, directly or

This unit consists of a USB port and an auxiliary

Jack socket*. The audio ﬁles are transmitted

from a portable device - digital player or a USB

memory stick - to your Audio system and heard

via the vehicle's speakers.

using a lead. If the audio equipment is switched

on, the USb source is detected as soon as it

is connected. Play begins automatically after a

delay which depends on the capacity of the USb

memory stick.

The ﬁle formats supported are .mp3 (mpeg1

layer 3 only) and .wma (standard 9 only,

128 kbits/sec compression).

USB memory stick or Apple^®player of

generation 5 or later:

Certain playlist formats are supported (.m3u, ...)

On reconnection of the previous memory stick

used, play is resumed automatically with the last

track played.

-

Give preference to multimedia USB memory

sticks (in general formatted FAT 32 File

allocation Table),

the apple^®player lead is essential,

-

navigation through the ﬁle database is also

possible by means of the steering mounted

controls.

The system puts together playlists (temporary memory) created

over a period which depends on the capacity of the USB device.

The other sources are available during this time.

The playlists are updated each time the ignition is switched off or

each time a USB memory stick is connected.

When connecting for the ﬁrst time, the classiﬁcation suggested

is by folder. When you reconnect, the classiﬁcation selected

previously is retained.

other apple^®players of earlier generations and

players using the MTP protocol*:

-

play via Jack-Jack lead only (not supplied),

navigation through the ﬁle database is from

the portable device.

* Depending on vehicle.

343

05 USB PLAYER

Using the USB PORT

Press one of these buttons to gain

access to the previous / next track on

the classiﬁcation list currently being

played.

Press and hold one of the buttons for

fast forward or backward play.

Press and hold LIST to display the

different classiﬁcations.

Select by Folder / Artist / Genre / Playlist,

press OK to select the classiﬁcation

required, then press OK again to conﬁrm.

Press one of these buttons to

gain access to the previous / next

Genre, Folder, artist or Playlist on

the classiﬁcation list currently being

played.

-

by Folder: all folders containing audio

ﬁles recognised on the peripheral

device.

by Artist: all of the artist names

deﬁned in the ID3 Tags, classiﬁed in

alphabetical order.

-

by Genre: all of the genres deﬁned in

the ID3 Tags.

by Playlist: in accordance with the

playlists recorded on the USB device.

connecting an Apple^®player via the USB port

The lists available are Artist, Genre and Playlist (as deﬁned in the

apple^®player).

Selection and Navigation are described in steps 1 to 4 above.

Press LIST brieﬂy to display the

previously selected classiﬁcation.

Navigate through the list using the left/

right and up/down buttons.

Conﬁrm the selection by pressing OK.

Do not connect a hard disk or USB connection device other

than audio equipment to the USB port. This could damage your

installation.

05 USB PLAYER

Using the auxiliary input (AUX)

Adjusting the volume of the auxiliary

source

JAcK socket or USB port (according to vehicle)

The auxiliary input, JACK or USB, allows the connection of a

portable device (MP3 player...).

First adjust the volume of your portable device.

Do not connect a device to both the JACK socket and the USB

port at the same time.

Connect the portable device (MP3

player…) to the JACK socket or to

the USB port, using a suitable cable

(not supplied).

Then adjust the volume of your audio

system.

The display and control is via the portable device.

Press the SoURCE button several

times in succession and select AUX.

345

06 BLUETOOTH FUNcTIONS

The services offered depend on the network, the SIM card and the

Bluetooth telephone

Screen c

(Available according to model and version)

compatibility of the Bluetooth equipment used.

Consult your telephone's manual and your operator to ﬁnd out which

services are available to you.

Pairing a telephone / First connection

The ﬁrst 4 telephones recognised are displayed in this window.

For safety reasons and because they require prolonged attention

on the part of the driver, the operations for pairing of the Bluetooth

mobile telephone with the Bluetooth hands-free system of your

audio equipment must be carried out with the vehicle stationary

and the ignition on.

The TELEPHONE menu permits access to the following functions

in particular: Directory*, Call list, Pairing management.

* If your telephone is fully compatible.

Select the telephone to be connected from the list. Only one

telephone can be connected at a time.

Go to www.citroen.co.uk for more information (compatibility, more

help, ...).

activate the telephone's bluetooth function

and ensure that it is "visible to all" (telephone

conﬁguration).

A virtual keypad is displayed in the screen:

enter a code with at least 4 digits.

Conﬁrm by pressing OK.

A message is displayed in the screen of the

Press the MENU button.

In the menu, select:

telephone chosen. To accept the pairing, enter the

same code on the telephone, then conﬁrm with OK.

If pairing fails, the number of attempts is not limited.

-

bluetooth telephone function -

audio

Bluetooth conﬁguration

A message that the pairing has been successful appears in the

screen.

-

Perform a Bluetooth search

The automatic connection authorised is only active after the

telephone has been conﬁgured.

The directory and the call list can be accessed after the

synchronisation period.

A window is displayed with a message that a search is in progress.

06

BLUETOOTH FUNcTIONS

Receiving a call

Making a call

An incoming call is announced by a ring and a superimposed

display in the vehicle's screen.

From the Bluetooth telephone function Audio menu, select Manage

the telephone call then Call, Call list or Directory.

Press this button for more than two seconds for

access to your directory, then navigate with the

thumb wheel.

Select the YES tab on the display

using the buttons and conﬁrm by

pressing OK.

or

To dial a number, use your telephone's keypad,

with the vehicle stationary.

Press this button to accept the call.

The system accesses the telephone's contacts directory, depending

on compatibility, and while the Bluetooth connection with it is

maintained.

With certain telephones connected by bluetooth you can send a

contact to the directory of the audio system.

Contacts imported in this way are saved in a permanent directory

visible to all, whatever the telephone connected.

The menu for the directory is not accessible if it is empty.

347

06

BLUETOOTH FUNcTIONS

Bluetooth audio streaming*

Wireless transmission of music ﬁles on the telephone, played via

the audio equipment. The telephone must be able to manage the

appropriate Bluetooth proﬁles (Proﬁles A2DP / AVRCP).

Ending a call

Initiate the pairing between the telephone and

the vehicle. This pairing can be initiated from

the vehicle's telephone function menu or via the

telephone's keypad. Refer to the steps in "Pairing

a telephone" on the previous pages. During the

pairing phase, the vehicle must be stationary with

the key in the ignition.

During a call, press this button for more than

2 seconds.

Conﬁrm with OK to end the call.

Select the telephone to be connected from the telephone function menu.

The audio system connects to a newly paired telephone

automatically.

Activate the streaming source by

pressing the SOURCE button**.

The tracks to be played can be

controlled as usual via the buttons on

the audio system control panel and

the steering mounted controls***.

The contextual information can be

displayed on the screen.

* Depending on the compatibility of the telephone.

** In certain cases, playing of the Audio ﬁles must be initiated from the

keypad.

*** If the telephone supports the function.

07 ScREEN MENU MAP(S)

Screen A

MAIN FUNcTION

Radio-cd

Options

1

Option A

1

RdS options

diagnostic

View

Option A1

2

REG mode

option a11

2

3

cd repeat

abandon

2

Option B...

1

Shufﬂe play

2

Vehicle config*

1

R wiper in rev

2

Guide lighting

2

* The settings vary according to vehicle.

349

07

ScREEN MENU MAP(S)

display adjust

Language

Units

1

Year

Français

Italiano

Temperature: °celsius / °Fahrenheit

2

Fuel consumption: KM/L -

L/100 - MPG

Month

day

Nederlands

Portuguès

Portuguès-Brasil

deutsch

Hour

Minutes

12 H/24 H mode

English

Español

cestina

Hrvatski

Magyar

07

ScREEN MENU MAP(S)

Press the OK dial for access to short-cut menus according

to the display on the screen:

Screen c

cd / MP3 cd

USB

RAdIO

activate / deactivate Intro

activate / deactivate track repeat (of the

current folder / artist / genre / playlist)

activate / deactivate RdS

1

activate / deactivate track repeat (the

entire current cd for cd, the entire

current folder for MP3 cd)

activate / deactivate REG mode

activate / deactivate radiotext

1

activate / deactivate random play (of the

current folder / artist / genre / playlist)

activate / deactivate random play (the

entire current cd for cd, the entire

current folder for MP3 cd)

1

351

07

ScREEN MENU MAP(S)

Pressing the MENU button displays:

Screen c

Audio functions

Trip computer

1

FM preferences

Enter distance to destination

Distance: x miles

2

alternative frequencies (RDS)

3

activate / deactivate

Alert log

4

Regional mode (REG)

Diagnostics

activate / deactivate

State of systems*

Systems activated or deactivated

4

Radio-text information (RDTXT)

activate / deactivate

4

Play modes

2

Album repeat (RPT)

3

activate / deactivate

Track random play (RDM)

activate / deactivate

4

3

* The settings vary according to vehicle.

07

ScREEN MENU MAP(S)

Personalisation-

Bluetooth telephone

1

configuration

Deﬁne vehicle settings*

Bluetooth conﬁguration

Connect/Disconnect an equipment

Telephone function

2

Display conﬁguration

Video-brightness adjustment

normal video

3

Audio Streaming function

Consult the paired equipment

4

inverse video

4

brightness (- +) adjustment

Setting the date and time

setting day/month/year

hour/minute adjustment

choice of 12 h / 24 h mode

Choice of units

4

Delete a paired equipment

Perform a Bluetooth search

4

3

4

call

2

Calls list

Directory

3

4

3

Manage the telephone call

Terminate the current call

Activate secret mode

2

l/100 km - mpg - km/l

°Celsius / °Fahrenheit

4

3

choice of language

2

* The settings vary according to vehicle.

353

FREQUENTLY ASKEd QUESTIONS

QUESTION

ANSWER

SOLUTION

There is a difference in

sound quality between

the different audio

For optimum sound quality, the audio settings (Volume, Bass, Treble,

Ambience, Loudness) can be adapted to the different sound sources,

which may result in audible differences when changing source (radio,

CD...).

Check that the audio settings (Volume, Bass,

Treble, Ambience, Loudness) are adapted to

the sources listened to. It is advisable to set

the aUDIo functions (bass, Treble, Front-Rear

Balance, Left-Right Balance) to the middle

position, select the musical ambience "None" and

set the loudness correction to the "active" position

in CD mode or to the "Inactive" position in radio

mode.

sources (radio, CD...).

The CD is ejected

automatically or is not

played by the player.

The CD is inserted upside down, is unplayable, does not contain any

-

Check that the CD is inserted in the player the

right way up.

Check the condition of the CD: the CD cannot

be played if it is too damaged.

Check the content in the case of a recorded

CD: consult the advice in the "Audio" section.

The audio equipment's CD player does not

play DVDs.

audio data or contains an audio format which the player cannot play.

The CD is protected by an anti-pirating protection system which is not

recognised by the audio equipment.

Due to their quality level, certain writeable

CDs will not be played by the audio system.

The message "USB

peripheral error" is

The battery of the peripheral may not be sufﬁciently charged.

Recharge the battery of the peripheral device.

Reformat the memory stick.

displayed on the screen.

The bluetooth connection

is cut.

The USB memory stick is not recognised.

The memory stick may be corrupt.

FREQUENTLY ASKEd QUESTIONS

QUESTION

ANSWER

SOLUTION

I am unable to access my Few telephones or service providers allow the use of this function.

voicemail.

The CD player sound is

poor.

The CD used is scratched or of poor quality.

Insert good quality CDs and store them in suitable

conditions.

The audio equipment settings (bass, treble, ambiences) are unsuitable.

An incorrect waveband is selected.

Set the treble or bass level to 0, without selecting

an ambience.

The stored stations do

not function (no sound,

87.5 Mhz is displayed...).

Press the baND aST button to return to the

waveband (aM, FM1, FM2, FMaST) on which the

stations are stored.

The trafﬁc announcement The radio station is not part of the regional trafﬁc information network.

Tune to a radio station which broadcasts trafﬁc

information.

(TA) is displayed. I do

not receive any trafﬁc

information.

The quality of reception

of the radio station

listened to gradually

deteriorates or the stored

stations do not function

(no sound, 87.5 Mhz is

displayed...).

The vehicle is too far from the transmitter used by the station listened

to or there is no transmitter in the geographical area through which the

vehicle is travelling.

Activate the RDS function to enable the system

to check whether there is a more powerful

transmitter in the geographical area.

The environment (hills, buildings, tunnels, basement car parks...) block

reception, including in RDS mode.

This phenomenon is normal and does not indicate

a failure of the audio equipment.

The aerial is absent or has been damaged (for example when going

through a car wash or into an underground car park).

Have the aerial checked by a CITROËN dealer.

355

FREQUENTLY ASKEd QUESTIONS

QUESTION

ANSWER

SOLUTION

Sound cut-outs of 1 to

During this brief sound cut-out, the RDS searches for any frequency

Deactivate the RDS function if the phenomenon is

too frequent and always on the same route.

2 seconds in radio mode. permitting better reception of the station.

With the engine off,

the audio equipment

switches off after a few

minutes of use.

When the engine is switched off, the audio equipment operating time

Start the vehicle's engine to increase the battery

charge.

depends on the battery charge.

The switch-off is normal: the audio equipment switches to economy mode

and switches off to prevent discharging of the vehicle's battery.

The message "the audio

system is overheated"

appears on the display.

In order to protect the installation if the surrounding temperature is too

high, the audio equipment switches to an automatic thermal protection

mode leading to a reduction of the volume or stopping of the playing of

the CD.

Switch the audio system off for a few minutes to

allow the system to cool.

Audio and telematics -> Audio system for Your Citroen Ds3 SUV First Generation (2009-2019)

Related Topics

Audio and telematics

Popular Owner Manuals

Latest Owner Manuals