Advertisement

Advertisement

Comfort -> Front seats for Your Citroen Ds3 SUV Second Generation (2018-2025)

Front seats  
Seat consisting of a seat cushion, a backrest and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort.  
Manual adjustments  
Forwards-backwards adjustment  
Height adjustment  
Backrest angle adjustment  
F
Raise the control and slide the seat  
forwards or backwards.  
F
Pull the control upwards to raise or push  
it downwards to lower, as many times as  
required, to obtain the position required.  
F
Push the control rearwards.  
Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat, so as to avoid the risk of of  
jamming the seat caused by the presence of objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement  
immediately.  
73  
Comfort  
Additional adjustments  
Head restraint height adjustment  
Heated seats control  
With the engine running, the front seats can be  
heated separately.  
The head restraint is fitted with a frame  
with notches which prevents it from  
lowering; this is a safety device in case  
of impact.  
The adjustment is correct when the  
upper edge of the head restraint is  
level with the top of the head.  
Never drive with the head restraints  
removed; they must be in place and  
adjusted correctly.  
F
F
To raise the head restraint, pull it upwards.  
To remove the head restraint, press the  
lug A and pull the head restraint upwards.  
To put the head restraint back in place,  
engage the head restraint stems in the  
openings keeping them in line with the seat  
back.  
F
Use the adjustment dial, placed on the side  
F
F
of each front seat, to switch on and select  
the level of heating required:  
0: Off.  
1: Low.  
2: Medium.  
3: High.  
To lower the head restraint, press the lug A  
and the head restraint at the same time.  
F
To return the seat to its initial position, push  
the backrest rearwards.  
If any difficulty is encountered,  
simultaneously push rearwards the  
seat backrest angle control lever  
(located at the bottom of the backrest)  
and the backrest.  
Access to the rear seats  
grab handle  
This easy to use handle, located at the top of  
No person or object should prevent the  
seat slide from returning to its initial  
position; the return to this position is  
necessary for longitudinal locking.  
Check that the seat belt has reeled in  
correctly so as to not impede access to  
the rear seats for passengers.  
F
Pull the control upwards to fold the seat  
back and move the seat forward.  
the side trim:  
-
-
-
provides a means of support for the outer  
rear passengers when moving,  
provides a hand hold to ease access to the  
rear seats,  
Ensure that you use only the  
appropriate control lever, located at the  
top of the backrest.  
facilitates exit from the rear seats.