Advertisement

Advertisement

Instruments and controls -> Service indicator for Your Citroen Ds3 SUV Second Generation (2018-2025)

Service indicator  
More than 1 800 miles (3 000 km)  
remain before the next service is  
due  
Between 600 miles (1 000 km)  
and 1 800 miles (3 000 km) remain  
before the next service is due  
When the ignition is switched on, no service  
information appears in the screen.  
For 5 seconds after the ignition is switched on,  
the spanner symbolising the service operations  
comes on. The distance recorder display line  
indicates the distance remaining before the  
next service is due.  
Example: 1 739 miles (2 800 km) remain  
before the next service is due.  
For 5 seconds after the ignition is switched on,  
the screen indicates:  
System which informs the driver when the  
next service is due, in accordance with the  
manufacturer's servicing schedule.  
The point at which the next service is due is  
calculated from the last indicator zero reset,  
depending on the distance travelled and the  
time elapsed since the last service.  
5 seconds after the ignition is switched on,  
the spanner goes off; the distance recorder  
resumes its normal operation. The screen then  
indicates the total distance.  
For BlueHDi Diesel versions, the  
degree of deterioration of the engine oil  
is also taken into account (depending  
on the country of sale).  
37  
Monitoring  
Less than 600 miles (1 000 km)  
Service overdue  
For BlueHDi Diesel versions, this alert  
remain before the next service is due  
For 5 seconds after the ignition is switched on,  
the spanner flashes to indicate that the service  
must be carried out as soon as possible.  
Example: the service is overdue by 186 miles  
(300 km).  
may also be accompanied by the fixed  
illumination of the service warning lamp  
when the ignition is on.  
Example: 560 miles (900 km) remain before  
the next service is due.  
For 5 seconds after the ignition is switched on,  
the screen indicates:  
For 5 seconds after the ignition is switched on,  
the screen indicates:  
The distance remaining may be  
weighted by the time factor, depending  
on the driving conditions.  
Therefore, the spanner may also come  
on if you have exceeded the period  
since the last service, indicated in the  
manufacturer's service schedule.  
For BlueHDi Diesel versions, the  
spanner may also be brought on earlier  
than expected, depending on the  
degree of deterioration of the engine oil  
(depending on the country of sale).  
The rate of deterioration of the engine  
oil depends on the driving conditions in  
which the vehicle is used.  
5 seconds after the ignition is switched on,  
the distance recorder resumes its normal  
operation. The spanner remains on to  
indicate that a service must be carried out  
soon.  
5 seconds after the ignition is switched on,  
the distance recorder resumes its normal  
operation. The spanner remains on.  
Following this operation, if you wish to  
disconnect the battery, lock the vehicle  
and wait at least five minutes for the  
zero reset to be taken into account.  
Service indicator zero reset  
After each service, the service indicator must  
be reset to zero.  
The procedure for resetting to zero is as  
follows:  
Retrieving the service  
information  
You can access the service information at any  
time.  
F
Press the trip distance recorder zero reset  
button.  
F
F
switch off the ignition,  
press and hold the trip distance recorder  
zero reset button,  
The service information is displayed for a  
few seconds, then disappears.  
F
F
switch on the ignition; the distance recorder  
display begins a countdown,  
when the display indicates "=0", release  
the button; the spanner disappears.