261
Practical information
Rear lamps
1. Brake lamps (P21/5W).
2. Sidelamps (LEDs).
3. Direction indicators (PY21W amber)
4. Reversing lamp (P21W).
5. Rear foglamps (P21W).
Changing stop lamp, reversing lamp and direction indicator bulbs
These three bulbs are changed from inside the boot:
)
)
open the boot,
)
)
)
remove the foam seal,
remove the access grille from the
corresponding side trim panel,
slacken the two nuts using a 10 mm tube
spanner then remove the nuts by hand,
unclip the lamp unit connector,
extract the lamp unit carefully pulling in its
middle towards the outside,
unclip the two small secondary connectors,
spread the two tabs and remove the bulb
holder,
turn the bulb a quarter of a turn and
change it.
)
Amber bulbs, such as those for the
direction indicators, must be replaced
by bulbs of the same rating and colour.
The lamps on the tailgate, other than
the guide lamps, are dummy units.
They are there for aesthetic
)
)
)
To reassemble, carry out these operations in
reverse order.
Take care to engage the lamp unit in its guides,
while keeping it in line with the vehicle.
Tighten sufficiently to ensure sealing, but
without damaging the lamp.
purposes only.
English 
