Direction indicators
Hazard warning lamps
On versions fitted with LED direction indicators,
the line of LEDs is illuminated sequentially.
The brightness of the daytime runnning lamps
is reduced during sequential operation of the
direction indicators.
Press the button, the direction indicators flash.
They can operate with the ignition off.
F
F
Lower the lighting control stalk fully when
moving to the left.
Raise the lighting control stalk fully when
moving to the right.
Three flashes
Move the stalk briefly upwards or downwards,
without going beyond the point of resistance;
the corresponding direction indicators will flash
3 times.
Automatic operation
of hazard warning lamps
When braking in an emergency, depending on
the rate of deceleration, as well as when the
ABS regulation is invoked or in the event of an
impact, the hazard warning lamps come on
automatically.
This function can be used at any speed,
but it is particularly useful for changing
lane on fast roads.
If you forget to cancel the direction
indicators for more than twenty
seconds, the volume of the audible
signal will increase if the speed is above
40 mph (60 km/h).
They switch off automatically the first time you
accelerate.
F
You can also switch them off by pressing
the button.
English 
