2002-2008 Cupra Born SUV Data transmissions -> Full Link User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Data transmissions -> Full Link for Your Cupra Born SUV First Generation (2002-2008)

Data transmissions  
●
The wireless (WLAN) connection is estab-  
lished. To complete the connection, it may be  
necessary to enter other data into the device.  
The availability of the technologies that Full  
Link includes depends on the country and the  
mobile phone device used.  
Disconnect the USB connection and con-  
nect with the infotainment system again via  
Wi-Fi or Bluetooth®. Wireless Full Link is now  
conꢀgured.  
You can ꢀnd more information on the CUPRA  
website.  
The pairing has concluded. The connected  
mobile phone device can also use Wireless Full  
Link from now on without the USB connection.  
Note  
Due to the large number of devices on the  
market, it is not possible to guarantee fault-  
free operation of all functions.  
Access the Full Link main menu  
If pop-up menus are rejected during the con-  
nection process, Wireless Full Link will not be  
available. In this case, CUPRA recommends re-  
moving the devices in both the telephone set-  
tings and the infotainment system, and restart-  
ing the connection process.  
Browsing the Full Link main menu depends on  
the infotainment system used.  
●
Press Home > Full Link  
Full Link  
Conꢀgure Wireless Full Link  
Introduction  
In order to use Wireless Full Link, you must ꢀrst  
pair the mobile phone device with the infotain-  
ment system. To do this, proceed as follows:  
With Full Link it is possible to view and use  
the contents and functions that are shown on  
the mobile phone device on the infotainment  
screen.  
WARNING  
The use of applications while driving can dis-  
tract your attention from the traꢁic. Any dis-  
traction aꢁecting the driver in any way can  
lead to an accident and cause injuries.  
Connect a mobile phone device for the ꢀrst  
time.  
To do this, the mobile phone device must  
be connected with the infotainment system  
through a USB interface.  
●
●
Unlock the mobile phone device.  
●
Always drive as carefully and responsibly as  
Enable Wi-Fi reception and Bluetooth® on  
possible.  
the mobile phone device.  
Some technologies can also be used by Wire-  
less Full Link through the Bluetooth® interface  
and a Wi-Fi connection.  
●
Connect the mobile phone device to the in-  
fotainment system using a USB cable or via  
Bluetooth®.  
WARNING  
Any applications that are not suitable or ex-  
ecute incorrectly may cause damage to the  
vehicle, accidents and serious injuries.  
●
Access the Full Linkmain menu, if it is not  
The following technologies may be available:  
displayed automatically.  
●
●
●
●
●
Apple CarPlay™  
●
●
Select the mobile phone device and the  
Protect the mobile phone device and its  
applications from inappropriate use.  
Apple CarPlay™ Wireless  
Android Auto™  
technology you want.  
●
Never carry out modiꢀcations to the appli-  
cations.  
●
Conꢀrm authorisation inquiries on the mo-  
bile phone device to grant the necessary au-  
thorisations to the infotainment system.  
Android Auto™ Wireless  
MirrorLink®  
●
Follow instructions in the instruction man-  
ual for the mobile phone device.  
226  
Full Link
●
Applications, their use and the necessary mo-  
bile phone connection may be pay per use.  
The iPhone™ must be compatible with Ap-  
NOTICE  
ple CarPlay™.  
CUPRA cannot be held liable for any damage  
caused to the vehicle as a result of the use  
of applications that are of poor quality or  
are defective, the inadequate programming  
of the applications, the insuꢁicient coverage  
of the network, the loss of data during trans-  
mission or the improper use of mobile phone  
devices.  
●
Voice control (Siri ™) must be active on the  
The oꢁer of applications can be varied and de-  
signed for a vehicle or a speciꢀc country. The  
content and volume of applications, as well  
as the companies that oꢁer them, may vary.  
Some applications also depend on the availa-  
bility of third-party services.  
iPhone™.  
●
Apple CarPlay™ must be active without limi-  
tations in the iPhone™ settings.  
●
If this is not possible via Apple CarPlay™  
Wireless, the iPhone™ must be connected to  
the infotainment system via a USB connection.  
Only USB connections with data transmission  
are suitable for the use of Apple CarPlay™.  
It cannot be guaranteed that all the applica-  
tions oꢁered will work on all mobile phone de-  
vices or with all their operating systems.  
Note  
The applications oꢁered by CUPRA can be  
modiꢀed, cancelled, deactivated, reactivated  
and extended without prior notiꢀcation.  
●
The USB cable used must be an original Ap-  
●
Wireless Full Link may not be compatible  
ple™ cable.  
with all technologies.  
●
Apple CarPlay™ Wireless: Bluetooth® and Wi-  
When crossing the border into countries  
To avoid distracting the driver while driving,  
only certiꢀed applications can be used.  
with permitted radio frequencies diꢁerent  
to those in your own country, running the  
Full Link Wireless function may be restricted  
or even unavailable due to legal regulations.  
This can also be indicated by a message in  
the infotainment system. Running Full Link  
via cable is not aꢁected by this restriction  
and can continue to be used.  
Fi must also be activated on the iPhone™.  
Establish connection  
Full Link symbols and settings  
When you ꢀrst connect an iPhone™, follow the  
instructions on the infotainment system screen  
and on the iPhone ™.  
To show more information.  
To open the Full Link settings menu  
To select Apple CarPlay technology.  
To select Android Auto™ technology.  
To select MirrorLink® technology.  
The requirements must be met to use Apple  
CarPlay™.  
Launch Apple CarPlay™:  
Applications (apps)  
●
Press HOME > Full Linkto access the Full  
With Full Link, the display of the contents of  
CUPRA applications and other providers instal-  
led on mobile phone devices can be transfer-  
red to the infotainment screen.  
Link main menu.  
●
Press Apple CarPlay™ to establish a connec-  
Apple CarPlay™  
tion with the iPhone™.  
In order to use Apple CarPlay, the following  
requirements must be met:  
In the case of third-party applications, there  
may be compatibility problems.  
227  
Data transmissions  
●
●
With the multifunction steering wheel you  
If this is not possible via Android Auto Wire-  
Disconnecting  
can accept or reject incoming calls, as well as  
end an ongoing telephone conversation.  
less, the smartphone must be connected via  
the USB connection with data transmission to  
the infotainment system.  
●
In Apple CarPlay™ mode, press the CUPRA  
icon to access the Full Link main menu.  
●
Press to interrupt the active connection.  
Voice control  
●
The USB cable used must be an original ca-  
The representation of function buttons on the  
screen may vary.  
ble provided by the smartphone manufacturer.  
●
Press  
brieꢂy to start voice control using  
the infotainment system.  
Android Auto Wireless: Bluetooth® and WLAN  
(Wi-Fi) also have to be active on the smart-  
phone.  
●
Press this button for a long time to start voice  
Special characteristics  
control (Siri™) of the connected iPhone™.  
During an active Apple CarPlay™ connection,  
the following characteristics are applicable:  
Establish connection  
Note  
●
Bluetooth® connections between the  
When you ꢀrst connect a smartphone, follow  
the instructions on the infotainment system  
screen and on the smartphone.  
●
The availability of technologies depends on  
the country and may vary.  
iPhone™ and the infotainment system are not  
possible.  
●
You will ꢀnd information about techni-  
●
If there is an active Bluetooth® connection, it  
The requirements must be met to use Android  
Auto™.  
cal requirements, compatible iPhones, cer-  
tiꢀed applications and their availability on  
the CUPRA and Apple CarPlay ™ websites,  
at specialised CUPRA dealerships or at any  
SEAT dealership.  
is automatically interrupted.  
●
The phone functions are only available  
Launch Android Auto™:  
through Apple CarPlay™. The functions descri-  
bed for the Infotainment system are not availa-  
ble.  
●
Press HOME > Full Link to access the Full  
Link main menu.  
●
Press Android Auto™ to establish a connec-  
●
The connected iPhone™ cannot be used as  
Android Auto™  
tion with the smartphone.  
a media device in the Mediamain menu.  
●
It is not possible to use the built-in navigation  
Requirements for Android Auto™  
Disconnecting  
system and the Apple CarPlay™ navigation sys-  
tem at the same time. The last route started  
interrupts the one that was previously active.  
In order to use Android Auto™, the following  
requirements must be met:  
●
In Android Auto™ mode, press the /Exit  
icon to access the Full Link main menu.  
●
The mobile phone device, called smart-  
●
Press to interrupt the active connection.  
●
Depending on the infotainment system you  
phone from here on, must be compatible with  
Android Auto™.  
use, on the instrument panel screen you can  
view data from the Telephone mode.  
Special characteristics  
●
The smartphone must have an Android  
●
The instrument panel screen does not dis-  
During an active Android Auto™ connection,  
the following characteristics are applicable:  
Auto™ application installed.  
play any indication to turn.  
228  
Full Link
●
An active Android Auto™ device can be con-  
Establish connection  
Note  
nected at the same time via Bluetooth® (HFP  
proꢀle) with the infotainment system.  
When you ꢀrst connect a mobile phone de-  
vice, follow the instructions on the infotain-  
ment system screen and on the mobile phone  
device.  
●
The availability of technologies depends on  
the country and may vary.  
●
It is possible to use the phone’s functions  
●
You will ꢀnd information about technical  
through Android Auto™. If the Android Auto™  
device is connected at the same time via Blue-  
tooth® with the infotainment system, the tele-  
phone function of the infotainment can also  
be used.  
requirements, compatible mobile phone de-  
vices, certiꢀed applications and their availa-  
bility on the CUPRA and Android Auto™ web-  
sites, at specialised CUPRA dealerships or at  
any SEAT dealership.  
The requirements must be met to use Mirror-  
Link®.  
Start MirrorLink®:  
●
●
Press HOME > Full Linkto access the  
An active Android Auto™ device cannot be  
used as a media device in the Mediamain  
Full Linkmain menu.  
menu.  
MirrorLink®  
●
Press MirrorLinkto connect to the mobile  
●
It is not possible to use the built-in navigation  
device.  
Requirements for MirrorLink®  
system and the Android Auto™ navigation sys-  
tem at the same time. The last route started  
interrupts the one that was previously active.  
In order to use MirrorLink®, the following re-  
quirements must be met:  
Disconnecting  
●
In MirrorLink® mode, press  
APP to access  
●
Telephone and Media data can be displayed  
●
The mobile device must be compatible with  
the Full Link main menu.  
on the instrument cluster screen.  
MirrorLink®.  
●
Press to interrupt the active connection.  
●
With the multifunction steering wheel you  
●
The mobile phone device must be connec-  
can accept or reject incoming calls, as well as  
end an ongoing telephone conversation.  
ted to the infotainment system via a USB con-  
nection that is suitable for data transmission.  
Special characteristics  
During an active MirrorLink® connection, the  
following characteristics are applicable:  
●
The USB cable used must be an original ca-  
Voice control  
ble provided by the mobile phone device man-  
ufacturer.  
●
An active MirrorLink® device can be connec-  
●
Press  
brieꢂy to start voice control using  
ted to the infotainment system at the same  
the infotainment system.  
●
Depending on the mobile phone device  
time via Bluetooth®.  
used, a Car-Mode application that is suitable  
for using MirrorLink® must be installed.  
●
Press and hold this button to start voice  
●
If the MirrorLink® device is connected to the  
control (Google Assistant) on the connected  
smartphone.  
infotainment system via Bluetooth®, the tele-  
phone function of the infotainment system can  
be used.  
●
You cannot use an active MirrorLink® device  
as a media device in the Mediamain menu.  
229  

Related Topics

Popular Owner Manuals