2002-2008 Cupra Born SUV Driver information -> Instrument panel User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver information -> Instrument panel for Your Cupra Born SUV First Generation (2002-2008)

Driver information  
Meaning  
Sym-  
bol  
Meaning  
Sym-  
bol  
Meaning  
Sym-  
bol  
Low state of charge of the high volt-  
age battery ››› page 78  
High voltage battery discharged  
››› page 78  
Regulation due to a junction  
››› page 169  
Regulation due to a speed limit  
››› page 169  
Range drive proꢀle ››› page 150  
CUPRA driving proꢀle ››› page 150  
Comfort drive proꢀle ››› page 150  
Dynamic chassis control fault  
Regulation due to the end of a traf-  
››› page 151  
Auto Hold active ››› page 189  
Turn signals ››› page 113  
ꢀc jam ››› page 169  
Regulation due to a speed limit  
››› page 169  
Main beam on or ꢁasher on  
Performance drive proꢀle  
››› page 150  
Individual drive proꢀle  
››› page 150  
››› page 113  
Auto-Hold function activated  
››› page 188  
The speed limiter is not active  
››› page 160  
State of charge of the high-voltage  
battery ››› page 22  
Exterior temperature below +4 °C  
Reference to information in  
the on-board documentation  
››› page 26  
Remove foot from accelerator  
››› page 29  
Service intervals display  
››› page 30  
Speed limiter active ››› page 160  
Lane Assist (lane keeping system)  
active. ››› page 175  
Travel Assist active ››› page 177  
Adaptive Cruise Control (ACC) reg-  
ulating, no vehicle detected ahead  
››› page 164  
(+39 °F) ››› page 25  
Main beam assist active  
››› page 116  
Take control of the steering  
››› page 181  
Front assist switching on  
››› page 172  
Adaptive Cruise Control (ACC) reg-  
ulating, vehicle detected ahead  
››› page 164  
Instrument panel  
Introduction  
Vehicle charging ››› page 77  
After switching the drive system on with a 12-  
volt battery that is heavily discharged or newly  
changed some system settings (such as the  
time, the date, the personalised comfort set-  
Regulation due to the road layout  
››› page 169  
Regulation due to a roundabout  
Distance warning ››› page 171  
››› page 169  
20  
Instrumentpanel  
tings and the programming) might be altered  
or deleted. Check and correct these settings  
once the battery is suꢀiciently charged.  
display information from the driver assistant  
systems, among other things. From here on  
the Digital Cockpit will be referred to as the  
“digital instrument cluster”.  
With the  
button on the multifunction  
steering wheel you can select the “Driver assis-  
tant systems” and “Navigation” views.  
●
To switch views, swipe button  
from right  
WARNING  
to left or vice versa.  
Any distraction may lead to an accident, with  
the risk of injury.  
Views in the display area  
Incidents on the digital instrument cluster  
The digital instrument cluster can display the  
following views ››› Fig. 19:  
●
Do not operate the instrument panel con-  
Information and warnings are displayed on  
the digital instrument cluster as incidents. Inci-  
dents are displayed on the instrument cluster  
from the top and are hidden again after a short  
time.  
trols when driving.  
●
Summary:Before switching on the drive sys-  
●
To reduce the risk of accident and injury,  
tem: view with information on mileage (km),  
battery state of charge and range.  
only make adjustments to the instructions  
on the instrument panel display and to the  
instructions on the Infotainment system dis-  
play when the vehicle is stationary.  
●
Basic:Driving indications with information  
on driver assistant systems, speed and naviga-  
tion.  
WARNING  
Any distraction aꢀecting the driver in any  
way can lead to an accident and cause inju-  
ries.  
●
Driver assistant systems:Display of  
Digital Cockpit  
active driver assistant systems and speed. The  
navigation context is hidden.  
●
Operating the digital instrument cluster  
●
Navigation:Representation with informa-  
can distract your attention from the traꢀic.  
tion about the guided route and speed. The  
graphic view of the driver assistant systems is  
hidden.  
●
Always drive as carefully and responsibly as  
possible.  
Items such as pop-up windows are displayed  
in the upper display area, depending on the  
situation.  
The amount and content of the information  
displayed may vary depending on the equip-  
ment.  
Fig. 19 Digital Cockpit on the dash panel.  
The Digital Cockpit is a digital instrument clus-  
ter with a high-resolution colour liquid crystal  
display. In addition to the speedometer, by se-  
lecting diꢀerent information proꢁles you can  
Adjusting the views  
The diꢀerent views give you a better overview  
of driving and navigation data or information  
on driver assistant systems.  
21  
Driver information  
Remaining battery charge time indicator  
Battery state of charge and range  
on the digital instrument cluster  
WARNING  
During an active charging process, the remain-  
ing charging time to the desired state of charge  
is displayed on the instrument cluster. This in-  
formation is only displayed if the ignition is oꢀ  
When the high-voltage battery charge level  
reaches the reserve level, it is possible that  
certain driving properties may vary, i.e. the  
acceleration behaviour of the vehicle.  
(by pressing the  
button).  
●
Always adapt the speed and driving style  
to the conditions of visibility, weather, road  
and traꢀic, as well as the charge level of the  
high-voltage battery.  
Reserve area ››› Fig. 20  
1
2
3
Battery state of charge, percentage charge  
and range  
NOTICE  
Reserve indication (warning level 1), per-  
centage charge and range  
The self-discharge of the high-voltage bat-  
tery, for example due to the vehicle being  
parked for several months, can cause dam-  
age to the battery in the event of high ambi-  
ent temperature and the battery having a low  
charge level.  
Reserve indication (warning level 2), per-  
centage charge and range  
Fig. 20 On the digital instrument cluster:  
range and reserve indication.  
Reserve area warning levels:  
Battery state of charge indication  
Yellow The battery state of charge is lower  
The current state of charge of the high-voltage  
than 20 %.  
●
Always ensure that the charge level of the  
battery is indicated by the symbol  
on the  
high-voltage battery is suꢀicient!  
Red The battery state of charge is lower than  
1
digital instrument cluster ››› Fig. 20 . The  
battery symbol will be more or less full depend-  
ing on the state of charge of the battery.  
10 %.  
Charge the high-voltage battery as soon as  
possible to prevent the vehicle from stopping  
Note  
If the outside temperature is very low and,  
therefore, the high-voltage battery is very  
cold, the autonomy may be reduced.  
›››  
.
Range indication  
The vehicle range is displayed in kilometres  
(km) or miles (mi) depending on the selected  
WARNING  
2
If the vehicle is driven with a very low a  
charge level of the high-voltage battery, the  
vehicle may stall in traꢀic, causing serious  
damage or accidents and injuries.  
setting ››› Fig. 20  
.
The displayed value is calculated and updated  
based on the driving style and ambient con-  
ditions. Hence, the autonomy may vary even  
with the high-voltage battery fully charged.  
●
Always ensure that the charge level of the  
high-voltage battery is suꢀicient!  
22  
Instrumentpanel  
When the current drive power and current  
power availability are the same (the bars are  
the same length), the power limit of the elec-  
tric motor has been reached.  
Power display  
Note  
The power limit cannot be reached at any  
speed.  
Note  
Head-up-Display (HUD)  
The power limit cannot be reached at any  
speed.  
Relevant factors  
Fig. 21 On the digital instrument  
cluster: power indicator (schematic  
representation).  
Aside from the speed of the vehicle, the fol-  
lowing factors are also relevant:  
●
The availability of drive and recuperation de-  
pends on the state of charge of the high volt-  
age battery. If its state of charge is high, recu-  
peration may be limited; if it is low, drive may  
be limited.  
The power display shows the current electric  
motor power availability and the current drive  
power.  
●
If the temperature of the high voltage bat-  
Display system  
tery is very low or very high, the available drive  
power may be reduced in general. This aꢀects  
drive and recuperation.  
Fig. 22 In the driver’s ꢀeld of view:  
On the bar that is split in half, the power indi-  
cator always shows the availability of brake en-  
1
2
Proximity HUD  
and AR HUD  
.
1
ergy recuperation ››› Fig. 21  
(green) on the  
The Head-up-Display (HUD) projects certain  
information or warnings from assistance sys-  
tems or the infotainment system into the driv-  
er’s ꢁeld of view.  
left hand side and power availability ››› Fig. 21  
WARNING  
2
(blue) on the right hand side.  
Driving properties may vary when the electric  
motor's available power is low or the state of  
charge of the high-voltage battery reaches  
its reserve level, e.g. the vehicle's accelera-  
tion behaviour.  
When the corresponding section of the bar  
reaches the end mark, availability is unlimited.  
If there is a limitation, the bar is shortened ac-  
cordingly.  
Display areas  
Explanations of the areas displayed on the  
Head-up-Display ››› Fig. 22:  
The current drive power is displayed dynami-  
cally on a bar with a lighter colour, either as  
recuperation power (light green) on the left, or  
as drive power (light blue) on the right.  
●
Always adapt the speed and driving style  
to the conditions of visibility, weather, road  
and traꢀic, as well as the charge level of the  
high-voltage battery.  
●
Proximity HUD. Information on speed, navi-  
gation and driver assistant systems is displayed  
1
on the proximity HUD  
.
23  
Driver information  
●
2
●
Augmented reality HUD (AR) The AR  
Only clean the Head-up-Display with a soft  
Infotainment system settings  
cloth and a mild cleaning product. Microꢂbre  
cloths can scratch the Head-up-Display.  
HUD can project indications directly into the  
ꢁeld of view of the driver, depending on the  
driving situation. This happens, for example,  
for navigation.  
Further settings of the Head-up-Display can  
be changed in the vehicle settings menu of the  
infotainment system.  
Status display  
The following settings can also be adjusted:  
The amount and content of the information  
displayed may vary depending on the equip-  
ment.  
In the Head-up-Display settingssub-  
menu:  
Possible indications on the instrument panel  
display  
●
Adjustment of the light intensity of Head-  
The digital instrument cluster can display a va-  
riety of information, superimposed according  
to the vehicle's equipment:  
Switching the Head-up-Display on and oꢀ  
up-Display indications. The intensity is au-  
tomatically reduced as the ambient bright-  
ness decreases. The basic intensity is adjus-  
ted along with the instrument/switch lighting  
The Head-up-Display can be switched on and  
oꢀ in the infotainment system’s vehicle set-  
tings menu.  
●
●
Doors, front bonnet and rear lid open  
Warning and information messages  
››› page 25  
Navigation indications  
››› page 118.  
●
●
Press the Vehiclefunction button.  
●
Selection of the indications to be shown on  
In Vehicle, select the Interiorview and  
press the Head-up-Displayfunction button.  
the Head-up-Display, e.g. driver assistant sys-  
tem indications.  
●
●
●
●
●
●
●
Outside temperature indicator  
Service interval display  
●
Switch the Head-up-Display on or oꢀ as de-  
sired. Activated functions are highlighted in  
colour.  
●
There is an alternative combination of col-  
ours for the Head-up-Display for adverse  
weather conditions, e.g. if it snows.  
Range indication  
Speed warning  
Height setting  
Speed warning for winter tyres  
Signs detected by the traꢀic signal detection  
system ››› page 27  
Remaining charge time when charging the  
high-voltage battery  
Note  
To adapt the vertical position of the image to  
your individual seating position, the Head-up-  
Display can be set in the infotainment system’s  
vehicle settings menu.  
●
Some indications, such as warnings, cannot  
be hidden.  
●
●
For optimal viewing of the display, correctly  
adjust the seat and the height of the Head-  
up-Display.  
1. Sit comfortably on the seat.  
2. In the vehicle settings of the infotainment  
system you can also adjust the rotation of  
the proximity area.  
●
Light falling on it can cause reꢁections.  
Wearing sunglasses with polarizing ꢂlters  
may prevent you from seeing the indications  
properly.  
24  
Instrumentpanel  
●
If when switching on the ignition warnings  
Doors, front bonnet and rear lid open  
Range indication  
are shown about existing faults, it might not  
be possible to change the settings or show  
the information as described. In this case,  
go to a specialised workshop and request a  
repair.  
When the vehicle is unlocked and while driv-  
ing, the instrument cluster display shows if any  
of the doors, the from bonnet or rear lid are  
opened and, in some cases, it is also indicated  
by an audible warning.  
It indicates the approximate distance in km  
that can still be travelled with the current ca-  
pacity of the battery charge if the same driv-  
ing style and consumption are maintained. The  
calculation is made based on current energy  
consumption, among other factors.  
Warning and information messages  
Outside temperature indicator  
WARNING  
If the outside temperature is lower than ap-  
proximately +4 °C (+39 °F), the “ice crystal  
symbol” on the outside temperature display  
also lights up. This symbol remains lit until the  
outside temperature exceeds +6 °C (+43 °F)  
The system runs a check on certain com-  
ponents and functions when the ignition is  
switched on and while the vehicle is moving.  
Faults are displayed on the instrument clus-  
ter display as red and yellow warning symbols  
››› page 18 accompanied by messages and,  
depending on the case, even an audible warn-  
ing. The representation of the messages and  
symbols may vary depending on the version of  
the instrument panel.  
Even when the outside temperature is higher  
than freezing temperature, some roads and  
bridges could be frozen.  
●
The “ice crystal symbol” indicates that  
there may be a risk of freezing.  
›››  
.
In the following situations, the displayed exte-  
rior temperature may be higher than the actual  
temperature due to the heat emitted by the  
motor:  
●
At outside temperatures above +4 °C (+39  
°F), there may be ice even when the “ice crys-  
tal symbol” is not on.  
●
The outside temperature sensor takes a  
guideline measurement.  
●
●
When the vehicle is stationary.  
When driving very slowly.  
Priority 1 warning (in red)  
The symbol lights up or ꢂashes (in part ac-  
companied by audible warnings). Stop driv-  
ing! Danger! Check the fault and eliminate  
the cause. If necessary, seek professional as-  
sistance.  
Note  
Odometer  
●
Some indications on the instrument panel  
screen may be concealed by a sudden event,  
e.g. an incoming call.  
The odometer records the total distance trav-  
elled by the vehicle.  
●
Depending on the equipment, some set-  
tings and instructions can be carried out or  
displayed on the infotainment system as well.  
Speed warning for winter tyres  
Priority 2 warning (in yellow)  
If the maximum set speed is exceeded, this is  
displayed on the instrument cluster display.  
The symbol lights up or ꢂashes (in part accom-  
panied by audible warnings). Operating faults  
or the lack of operating ꢂuids can cause dam-  
●
If there are several warnings at the same  
time, the symbols will be displayed one after  
the other for a few seconds. The symbols will  
stay on until you remove the cause.  
The speed warning can be set in the infotain-  
ment system ››› page 35.  
25  
Driver information  
age to the vehicle or a fault. Check the faulty  
function as soon as possible. If necessary, seek  
professional assistance.  
Function and operation  
System limitations  
Fatigue detection determines the driving be-  
haviour of the driver when starting a journey,  
making a calculation of tiredness. This is con-  
stantly compared with the current driving be-  
haviour. If the system detects that the driver is  
tired, an audible warning is given with a sound  
and an optical warning is shown with a sym-  
bol and supplementary message on the instru-  
The Fatigue detection has certain limitations  
inherent to the system. The following condi-  
tions can limit the Fatigue detection or prevent  
it from functioning.  
Reference to information in the own-  
er's manual  
●
●
●
●
●
●
●
At speeds below 60 km/h (40 mph).  
When cornering  
Further information on any warnings can be  
found in the owner's manual.  
In sections with roadworks.  
ment cluster screen ››› Fig. 23. The message  
on the instrument panel display is shown for  
approximately 5 seconds, and depending on  
the case, is repeated. The system stores the  
last message displayed.  
On roads in poor condition  
Information message  
In unfavourable weather conditions  
When a sporty driving style is employed  
In the event of a serious distraction to the  
It provides information about processes in the  
vehicle.  
driver  
The warning on the instrument cluster display  
can be hidden as follows:  
Driver alert system (break recom-  
mendation)  
Fatigue detection will be restored when the  
vehicle is stopped for more than 15 minutes,  
when the ignition is switched oꢀ or when  
the driver has unbuckled their seat belt and  
opened the door.  
●
Press the button on the multifunction  
steering wheel.  
Conditions of operation  
In the event of slow driving during a long pe-  
riod of time (below 60 km/h, 40 mph) the sys-  
tem automatically re-establishes the tiredness  
calculation. When driving at a faster speed the  
driving behaviour will be recalculated.  
Driving behaviour is only calculated at speeds  
above about 60 km/h (40 mph).  
Activating and deactivating  
Fatigue detection can be activated or deac-  
tivated in the infotainment system using the  
function button  
alerts.  
> Assistants > Driver  
Fig. 23 On the screen of the instrument  
panel: fatigue detection.  
The driver alert system is always switched  
on when the drive system is connected  
››› page 35.  
The driver alert system informs the driver when  
it deduces tiredness due to his/her behaviour  
at the wheel.  
26  
Instrumentpanel  
The traꢀic sign detection system does not  
work in all countries. Keep this in mind when  
travelling abroad.  
Road signs detection system1)  
WARNING  
The smart technology of the driver alert sys-  
tem cannot overcome the limits imposed by  
the laws of physics and only works within  
the limits of the system. Do not let the com-  
fort aꢀorded by the Fatigue detection system  
tempt you into taking any risks when driving.  
Take regular breaks, suꢀicient in length when  
making long journeys.  
Shown on the display  
In Germany, on motorways and vehicle roads,  
besides speed limits and overtaking provisions  
the system also displays the end of prohibition  
signs. The valid speed limit at the time in other  
countries is always shown.  
●
The driver always assumes the responsibil-  
ity of driving to their full capacity.  
The road signs detected by the system are  
displayed on the instrument cluster display  
››› Fig. 24 and, depending on the navigation  
system ꢁtted in the vehicle, in the infotainment  
system as well .  
Fig. 24 On the instrument cluster screen:  
example of speed limits with a generic  
additional sign.  
●
●
Never drive if you are tired.  
The system does not detect the tiredness  
of the driver in all circumstances. Consult  
the information in the section ››› page 26,  
Conditions of operation.  
The dynamic road signs display records stand-  
ard road signs using a camera ꢁtted to the base  
of the interior mirror, and provides information  
about speed limits, overtaking prohibitions and  
warning signs that it recognises.  
Depending on the equipment, an indication is  
also displayed on the Head-up-Display.  
●
In some situations, the system may incor-  
rectly interpret an intended driving manoeu-  
vre as driver tiredness.  
Road sign detection system messages:  
●
No warning is given in the event of the ef-  
Within its limitations, the system also displays  
a additional sign to indicate aspects such as  
temporary prohibitions. Even on routes with-  
out signs, the system can, if necessary, display  
the applicable speed limits.  
There are no road signs available  
fect called microsleep!  
●
●
The system is in its start-up phase.  
●
Please observe the indications on the in-  
strument panel and act as is necessary.  
OR: the camera has not recognized any  
mandatory or prohibitive signs.  
Error: Dynamic road sign display  
The dynamic road sign display system is activa-  
ted whenever the ignition is switched on.  
Note  
●
There is a fault in the system. Have the sys-  
tem checked by a specialised workshop.  
●
Fatigue detection has been developed for  
driving on motorways and well paved roads  
only.  
The additional signs are displayed on the  
Head-up-Display and on the instrument clus-  
ter as generic additional signs.  
●
If there is a fault in the system, have it  
checked by a specialised workshop.  
1)  
Not available on all markets.  
27  
Driver information  
●
Speed warning is currently unavail-  
able  
Second: Another traꢀic sign, such as a warn-  
Limited operation  
ing sign, can be displayed in second place.  
The traꢀic sign detection system has certain  
limitations. The following cases may lead the  
system to operate with limitations or not at all:  
●
Additional sign: If an additional sign is de-  
●
The speed warning function of the road sign  
tected, e.g. for temporary limits, it is shown be-  
low the valid road sign. For system reasons, a  
generic sign is displayed instead of the actual  
detected sign. The valid road sign is displayed  
on the Head-up-Display by the generic addi-  
tional sign.  
detection system is faulty. Have the system  
checked by a specialised workshop.  
●
In the case of poor visibility, e.g. in snow,  
Dynamic road sign display: Clean  
the windscreen!  
rain, fog or intense mist.  
●
In cases of dazzling, e.g. caused by head-on  
●
The windscreen is dirty in the camera area  
traꢀic or by the sun.  
or the camera’s visibility is impaired by weather  
conditions. Clean the windscreen.  
●
●
●
When driving at high speeds.  
The warning sign display is not available in all  
countries and the system may not be able to  
detect all existing warning signs.  
If the camera is covered or dirty.  
If the traꢀic signs are partially or totally ob-  
Dynamic road sign display: Cur-  
rently restricted  
structed, e.g. by trees, snow, dirt or other vehi-  
cles.  
●
The navigation system is not transmitting  
Speed warning  
data. Check if the navigation system has upda-  
ted maps.  
If the system detects that the permitted speed  
is exceeded, it may warn the driver with a  
“gong” and visually with a message on the dash  
panel display.  
●
In the case of traꢀic signs that do not fulꢁl  
the regulations.  
●
OR: the vehicle is in a region not included on  
●
●
In the case of damaged or bent traꢀic signs.  
In the case of variable messages on over-  
the navigation system's map.  
No data available  
The speed warning can be set or deactivated  
completely in the menu  
Driver alerts > Road sign detection  
››› page 35. The speed warning can be set to  
a value of 0, 5 or 10 km/h (0, 3 or 5 mph) above  
the permitted speed.  
head or gantry signs (LED-based variable traꢀic  
signs or other lighting units).  
> Assistants >  
●
The traꢀic sign detection system does not  
work in the current country.  
●
If the maps on the navigation system are not  
up-to-date.  
Display of traꢀic signs  
●
In the case of adhesives aꢀixed to vehicles  
After checking and evaluating the information  
from the camera, the infotainment system and  
actual vehicle data, the system displays up to  
two current road signs, and a generic addi-  
that depict traꢀic signs, e.g. speed limits on  
lorries.  
No entry sign  
The traꢀic sign recognition system warns  
acoustically and visually in the instrument  
panel when a no entry sign is crossed on a  
one-way road or an entrance to a motorway or  
highway.  
tional sign ››› Fig. 24:  
●
First: The sign that is currently valid for the  
driver is displayed on the left hand side of the  
screen, e.g. a prohibition of driving at over  
130 km/h (80 mph).  
28  
Instrumentpanel  
Pressing the accelerator can cancel the inter-  
vention of the assistance at any time.  
Eco-eꢀicient driving assistance  
WARNING  
The technology in the traꢀic sign detection  
system cannot change the limits imposed by  
the laws of physics and only works within the  
system's limits. Do not let the extra conven-  
ience aꢀorded by the traꢀic sign detection  
system tempt you into taking any risks when  
driving. The system is not a replacement for  
driver awareness.  
Eco-eꢀicient driving assistance can be  
switched on and oꢀ in the infotainment  
system, in the assistance system settings  
››› page 35.  
Eco-eꢀicient driving assistance is temporarily  
switched oꢀ if:  
●
●
The gear selector is in the B position.  
●
Adapt your speed and driving style to  
suit visibility, weather, road and traꢀic condi-  
tions.  
The Performance or CUPRA driving proꢁle  
is used.  
Fig. 25 Eco-eꢂicient driving assistance  
indication (schematic representation).  
●
●
Driven with adaptive cruise control (ACC).  
Poor visibility, darkness, snow, rain and fog  
may lead to the system failing to display traf-  
ꢂc signs or not displaying them correctly.  
When these conditions no longer exist, the as-  
sistance is reactivated if it is switched on in the  
assist system settings.  
Eco-eꢀicient driving assistance helps you drive  
with care and with low energy consumption  
by following instructions superimposed in the  
digital cockpit, depending on the situation.  
●
If the camera's ꢂeld of vision is dirty, cov-  
ered or damaged, system operation may be  
impaired.  
Eco-eꢀicient driving assistance is available de-  
pending on the equipment, although not in all  
countries.  
When you approach places such as a junction,  
a roundabout or a section of road with a speed  
WARNING  
The driving recommendations and traꢀic in-  
dications shown on the traꢀic sign detection  
system may diꢀer from the actual current  
traꢀic situation.  
WARNING  
limit, the symbol  
is displayed along with an  
event in the digital cockpit ››› Fig. 25.  
The system uses brake energy recuperation  
to reduce speed and does not apply the vehi-  
cle’s brakes.  
As soon as you follow the indication and  
take your foot oꢀ the accelerator, the vehicle  
adapts, based on the selected driving proꢁle  
and distance to the incident, brake energy re-  
cuperation and speed.  
●
The system may not detect or correctly  
●
Always be prepared to brake if deceleration  
show all the traꢀic signs.  
is not suꢀicient.  
●
Traꢀic signs and traꢀic regulations have  
priority over the recommendations and dis-  
plays provided by the system.  
Eco-eꢀicient driving assistance uses the trip  
data from the infotainment system and the  
sensors of some assist systems. If no destina-  
tion guidance is active, the most likely route is  
used.  
29  
Driver information  
The time and date are only displayed in the  
infotainment system.  
Service intervals  
WARNING  
The system is not a replacement for driver  
awareness.  
The service interval display appears on the  
instrument cluster screen and in the infotain-  
ment system.  
Service Menu  
●
Adapt your speed and driving style at all  
times to suit visibility, weather, road and traf-  
ꢂc conditions.  
In the Service menu various settings can be  
adjusted depending on the features.  
Inspection reminder  
●
Traꢀic signs on the road and traꢀic regula-  
If a service or an inspection has to be carried  
out soon, a service reminder will be displayed  
when the ignition is switched on.  
tions have priority over eco-driving notes.  
Open the Service menu  
●
Press the Vehiclefunction button in the in-  
Note  
The ꢁgure displayed are the kilometres that  
can still be travelled or the time until the next  
service.  
fotainment system.  
●
The appearance of the symbols may vary  
●
In the Vehiclemenu, press the Status  
slightly depending on the equipment and  
model. System updates may modify or ex-  
pand the symbols.  
function button.  
●
Select the Statusview. Open the desired  
Service due  
menu and set as desired. Activated functions  
are highlighted in colour.  
●
When the system is switched on, eco-ef-  
When it is time for a service or an inspection,  
an audio warning will sound when the ignition  
is switched on, and a spanner symbol may ap-  
pear for a few seconds on the instrument clus-  
ter display , along with one of the following  
messages.  
ꢂcient driving assistance can also increase  
recuperation without any indication being  
displayed. This can occur in situations such  
as when the accelerator pedal is released  
when a vehicle is driving in front. In this case,  
energy recuperation is adapted match the  
speed of the vehicle in front without any indi-  
cation being displayed.  
●
Press the Home button  
to return to the  
previous menu.  
Reset the trip recorder  
In the Statusview, select the Trip re-  
cordermenu.  
●
Service now!  
●
Inspection now!  
Press the 0.0function button to reset the  
value.  
●
Inspection in xx km (mi)!  
Time and date  
●
Inspection in xx days!  
Display the Vehicle Identiꢂcation Number  
(VIN)  
Setting the time on the infotainment system  
●
Press  
>
Settings ››› page 31.  
●
In the Statusview, select the Service  
●
●
Select the menu option Date and time.  
menu. The vehicle identiꢁcation number (VIN)  
is displayed.  
Select the time source: Automatic or Man-  
ual.  
30  

Related Topics

Popular Owner Manuals