2002-2008 Cupra Born SUV Maintenance -> Vehicle upkeep and cleaning User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Vehicle upkeep and cleaning for Your Cupra Born SUV First Generation (2002-2008)

Vehicle upkeepandcleaning  
If you wish to enjoy this service after this pe-  
riod, you can extend Service Mobility as long  
as you carry out the recommended Inspec-  
tion and Maintenance Services at a specialised  
CUPRA Service or SEAT Oꢀicial Service.  
Approved spare parts  
WARNING  
●
Cleaning products and other materials  
used for car care can be damaging to your  
health if misused.  
The approved exchange parts, following  
the manufacturer's instructions, constitute an-  
other service available to you, oꢀering the  
possibility of replacing complete sets, among  
which the best known are: lightened motor,  
control units, electrical elements, etc.  
●
Always keep care products in a safe place,  
out of the reach of children. Danger of poi-  
soning!  
If your CUPRA vehicle is immobilised due to a  
fault or an accident, our assistance services will  
help you keep moving.  
These parts are, approved parts, and are the  
same as the factory parts, which are also ap-  
proved spare parts.  
Take into account that Service Mobility diꢀers  
depending on the country where the vehicle  
was purchased. For further information, ask  
your specialised CUPRA dealer, any SEAT deal-  
ership or visit the CUPRA website in your coun-  
try.  
For the sake of the environment  
●
When purchasing car care products, chose  
products that are compatible with the envi-  
ronment.  
Original accessories  
●
The waste from car-care products should  
not be disposed of with ordinary household  
waste.  
We recommend you only use CUPRA Original  
Accessories and CUPRA approved accessories  
for your vehicle. The reliability, safety and suit- Vehicle upkeep and  
ability of these accessories have been inspec-  
cleaning  
ted speciꢁcally for this type of vehicle. CUPRA  
cannot be held liable for the safety and suita-  
Washing the vehicle  
Basic observations  
The longer you take to clean the tanks, e.g.  
remains of insects, bird excrements, tree resin  
or anti frost salt adhered to your vehicle, the  
more damage it can cause to the surface. High  
temperatures, for instance strong sunlight, fur-  
ther intensify the damage.  
bility of parts from other manufacturers.  
Regular and careful care helps to maintain the  
Service Mobility  
value of your vehicle. In addition, it may be-  
come a prerequisite to demand the warranty  
in the event of corrosion damage and deꢁcien-  
cies in the paint coat of the bodywork.  
As of the moment you purchase your CUPRA  
vehicle you will be able to enjoy the beneꢁts  
and coverage of Service Mobility.  
Before washing the car, soften the dirt using  
plenty of water.  
Specialised workshops have the necessary  
care products. Please follow the instructions  
for application on the packaging.  
For the ꢁrst two years after the purchase, your  
new CUPRA vehicle is automatically covered by  
Service Mobility at no additional cost.  
To remove encrusted dirt such as insects, bird  
droppings or tree resin, use a lot of water and a  
microꢁbre cloth.  
Have the underside of the vehicle washed after  
the end of the anti frost salts in winter.  
313  
Maintenance  
High pressure cleaning equipment  
Polishing  
WARNING  
When washing the vehicle with a high-pressure  
cleaner, always follow the operating instruc-  
tions for the equipment. This applies particu-  
larly to the operating pressure and the distance  
between the spraying water.  
Polishing is only necessary when the vehicle's  
paintwork has lost its gloss and cannot be re-  
stored with care products.  
●
Only wash the vehicle with the ignition  
switched oꢀ or according to the speciꢁca-  
tions of the car wash tunnel operator. Acci-  
dent hazard!  
Do not polish matt painted surfaces! If the  
paintwork is polished, the surface will be irrep-  
arably damaged.  
●
When cleaning the underbody or the inside  
of the wheel arches, protect yourself from  
sharp or pointy metal parts. Risk of cut!  
Do not remove snow and ice with a high-pres-  
sure cleaner.  
●
Washing vehicles with a matte paint by hand  
After cleaning the brakes could act more  
Do not use a nozzle that sprays the water out in  
a direct stream or one that has a rotating jet for  
forcing oꢀ dirt.  
slowly due to moisture or, in winter, the ice  
on the brake discs and pads. Accident haz-  
ard! In this case the brakes should be dried by  
pressing the brake pedal several times.  
To prevent damage to the vehicle when wash-  
ing it, ꢁrst remove the thicker dust and dirt.  
To remove traces of insects, grease and ꢁnger-  
prints, it is best to use a special cleaner for  
matte paint.  
The water temperature must not exceed 60°C.  
Automatic car washes  
WARNING  
Apply the product with a microꢁbre cloth. To  
avoid damaging the surface of the paint, do  
not apply too much pressure.  
Spray the vehicle before starting the car wash.  
Use of car washes without brushes if possible.  
Incorrect use of high-pressure cleaning  
equipment can cause damage. This can lead  
to accidents and serious injuries.  
Rinse with plenty of water. Then clean it with a  
neutral cleaning product and a soft microꢁbre  
cloth.  
Washing by hand  
●
Never direct the jet of the high-pressure  
cleaning equipment directly at the orange  
high-voltage cables, the high-voltage system  
components or the 12-volt on-board net-  
work.  
Clean your vehicle from top to bottom with a  
soft sponge or with a brush. Only use cleaning  
products that do not contain solvents.  
Rinse the vehicle again with plenty of water and  
then leave it to dry. Remove traces of water  
with a leather cloth.  
High-voltage system instructions  
Before washing the vehicle, end the charging  
process and close the charging socket com-  
pletely.  
Please also note the safety warning regarding  
high-pressure cleaning equipment ›››  
on  
page 313.  
314  
Vehicle upkeepandcleaning  
Cleaning the exterior  
Covers / Trims  
NOTICE  
Dirt: Neutral soap solution1), if a ꢁne steel  
●
●
Before washing the vehicle in an automatic  
Below can be found some recommendations  
on the cleaning and upkeep of individual vehi-  
cle components.  
cleaning product is required.  
car wash, please make sure to retract the  
exterior mirrors to prevent them from being  
damaged. The electric folding exterior mir-  
rors should only be folded/unfolded electri-  
cally!  
Paint  
Go to your specialised workshop if you have  
special questions or parts that are not listed.  
●
Paint ꢀaws: Check the paint's colour code at  
an authorised service and restore with a touch-  
up pencil.  
Take the general considerations into account  
››› page 316, Take special care with....  
●
Do not wash the vehicle in direct sunlight.  
Risk of damaging the paint job!  
●
●
Spilled fuel: Immediately rinse with water.  
●
Do not use sponges, abrasive household  
Tank with environmental rust: Apply rust re-  
sponges or similar to clean insect remains.  
Risk of damaging the surface!  
Windscreen wipers  
mover and then apply hard wax. Go you your  
●
Dirt: Soft cloth with windscreen cleaner.  
specialised workshop if you have any queries.  
●
Vehicle parts with matte paint:  
●
Corrosion: Have your specialised workshop  
–
Do not use polish or hard wax. Risk of  
Headlights / Tail lights  
take care of this.  
damaging the surface!  
1)  
●
Dirt: Soft sponge with neutral soap solution  
.
●
–
Water does not form droplets on the clean  
Never select washing programmes that  
include the use of wax. This could damage  
the appearance of matte paint.  
paint: Maintain with hard wax (at least twice a  
year).  
Sensors / Camera lenses  
–
Do not put stickers or magnets on parts  
●
Dirt:  
●
No shine despite maintenance/unattractive  
with matte paint, as removing them may  
damage the paint.  
paint: Treat with suitable wax and apply paint  
preservative afterwards if the wax used does  
not contain preservative ingredients.  
–
Sensors: soft cloth with a solvent-free  
cleaning product.  
–
Camera lenses: soft cloth with an alcohol-  
For the sake of the environment  
●
Tanks, e.g. insect remains, bird droppings,  
free cleaning product.  
tree sap, road salt: Immediately soak with water  
The car should only be washed in special  
wash bays. These places are prepared to pre-  
vent oily water from getting into the public  
drains.  
●
Snow/ice: Hand brush/Solvent-free anti-  
and remove with a microꢁbre cloth.  
freeze spray  
●
Grease-based dirt, e.g. cosmetic products or  
sunscreen: Remove immediately with a neutral  
Wheels  
soap solution1) and a soft cloth.  
●
●
Antifreeze salt: Water.  
Brake abrasion dust: Special acid-free clean-  
ing product.  
1)  
Neutral soap solution: maximum of two tablespoons in 1 l of water.  
315  
Maintenance  
Carbon ꢁbre parts  
Displays/instrument panel  
Natural leather  
●
●
●
Dirt: Clean in the same way as painted parts  
Dirt: Soft cloth with a liquid crystal display  
Recent dirt: Cotton cloth with neutral soap  
solution1)  
.
cleaner.  
››› page 313.  
●
●
●
Water-based dirt, e.g. coꢁee, tea, blood etc.:  
Control panels  
Decoration slides  
–
–
Recent stains: absorbent cloth.  
●
Dirt: Soft brush, then a soft cloth with a neu-  
tral soap solution1)  
1)  
●
Dirt: Soft sponge with neutral soap solution  
.
Dry stains: stain remover suitable for  
.
leather.  
Grease-based dirt, e.g. oil, make-up, etc.:  
Interior cleaning  
Seat belts  
–
Recent stains: absorbent cloth and suitable  
Dirt: Neutral soap solution1), allowed to dry  
Below can be found some recommendations  
on the cleaning and upkeep of individual vehi-  
cle components.  
●
stain remover for leather.  
before retracting.  
–
Dry stains: grease solvent spray.  
Special dirt, e.g. pens, nail polish, dispersion  
Go to your specialised workshop if you have  
special questions or parts that are not listed.  
Fabrics, artiꢁcial, Alcantara leather  
paint, shoe cream etc.: Stain remover suitable  
for leather.  
●
Particles of dirt stuck to surfaces: Vacuum  
Take the general considerations into account  
››› page 316, Take special care with....  
cleaner.  
●
Care: Apply preservative cream regularly to  
●
Water-based dirt, e.g. coꢁee, tea, blood etc.:  
Absorbent cloth and neutral soap solution1)  
protect from sunlight. Use a coloured preser-  
vative if required.  
.
Windows  
●
Grease-based dirt, e.g. oil, make-up, etc.:  
●
Dirt: Apply windscreen cleaner and then dry  
Carbon ꢁbre parts  
Apply a neutral soap solution1). Absorb the dis-  
solved grease and paint particles drying with an  
absorbent cloth, in case you must treat it with  
water afterwards.  
with a cloth.  
●
Dirt: Clean as with plastic parts.  
Covers / Trims  
Take special care with...  
1)  
●
Special dirt, e.g. pens, nail polish, dispersion  
●
Dirt: Neutral soap solution  
.
paint, shoe polish, etc.: Special stain remove:  
Headlights/tail lights  
dry with an absorbent cloth, if applicable, apply  
neutral soap solution afterwards1)  
Plastic parts  
●
Do not clean the headlights/tail lights with a  
.
●
●
Dirt: Damp cloth.  
Encrusted dirt: Neutral soap solution1), if pos-  
dry cloth or sponge.  
●
Do not use cleaning products that contain  
alcohol. Risk of cracks!  
sible a solvent-free plastic cleaning product.  
1)  
Neutral soap solution: maximum of two tablespoons in 1 l of water.  
316  
Vehicle upkeepandcleaning  
Wheels  
Covers/trims  
Seat belts  
●
●
●
●
Do not use for paint wax or other abrasive  
Do not use cleaning products or chrome  
Do not remove the seat belts to clean them.  
Seat belts and their components must never  
products.  
based cleaning agents.  
●
If the protective coating on the paint of the  
be cleaned with chemical products, nor should  
they be allowed to come into contact with cor-  
rosive liquids, solvents or sharp objects. Risk of  
damaging the fabric!  
Paint  
rim has been damaged due to stone impacts,  
scratches, etc., the damage should be repaired  
immediately.  
●
The vehicle must be free from dirt and dust  
before applying wax or care products. Risk of  
scratches!  
●
If you ꢁnd any damage to the belt webbing,  
Camera lenses  
belt ꢁttings, the belt retractor or the buckle,  
ask your specialised workshop to replace the  
belt in question.  
●
Do not apply wax or care products if the ve-  
●
Do not use hot or warm water to remove ice  
hicle is exposed to direct sunlight. Risk of dam-  
aging the paint job!  
or snow from the camera lenses. Risk of crack-  
ing the lens!  
●
The ambient rust deposits must not be re-  
Fabrics/artiꢁcial leather/microꢁbre  
●
To clean the camera lens, never use abrasive  
moved through friction. Risk of damaging the  
paint job!  
●
cleaning products or products with alcohol.  
Risk of scratches and cracks!  
Do not treat artiꢁcial leather/microꢁbre with  
leather cleaning products, solvents, wax polish,  
shoe cream, stain removers or similar prod-  
ucts.  
●
Remove cosmetic products and sunlight im-  
mediately. Risk of damaging the paint job!  
Windows  
●
If the stain is very hard to remove, take the  
Displays/instrument panel  
●
Remove snow and ice from windows and ex-  
vehicle to a specialised workshop to have it  
removed there. This will prevent damage.  
terior mirrors with a plastic scraper only. To  
avoid scratches, the scraper should only be  
pushed in one direction and not moved to and  
fro.  
●
The displays, the instrument panel and the  
trim around it must not be cleaned dry. Risk of  
scratches!  
●
Do not use steam cleaners, brushes, hard  
sponges, etc. to clean.  
●
Make sure that the instrument panel is  
●
Never remove snow or ice from windows and  
●
●
Do not turn on seat heating to dry the seats.  
Sharp objects on clothing, such as zips, rivets  
switched oꢀ and cooled down before cleaning.  
rearview mirrors with warm or hot water. Risk of  
cracks on the windows!  
●
Make sure that no liquid leaks between the  
or belts can damage the surface.  
instrument panel and the trim. Risk of damage!  
●
To prevent damage to the heating of the rear  
●
Open Velcro, e.g. on clothes can damage the  
window, do not put stickers over the heating  
elements.  
seat upholstery. Make sure that Velcro fasten-  
ers are closed.  
Control panels  
●
Make sure that no liquid leaks into the con-  
trol panels. Risk of damage!  
317  

Related Topics

Popular Owner Manuals